Vamzdžių šlifuoklis

Bernardo KBR 100 x 2000 Duo

Būklė: naujas, Belt width: 100 mm Belt length: 2000 mm Belt speed: 15 + 30 m/sec Pipe diameter: 20 - 76 mm Adjustable angle: from 30° to 90° Extraction port diameter: 2 x 75.0 mm Motor speeds: 1420 / 2660 rpm Flat grinding device: 400 x 100 mm Total power requirement: 2.5 / 3.3 kW Machine weight: approx. 148 kg Dimensions (L x W x H): 750 x 1400 x 1200 mm Fpjdpfxoxab Dzj Af Aog The KBR 100 x 2000 DUO is a multifunctional grinding machine designed for front-end grinding of pipes and profiles, grinding of edges and surfaces, as well as round grinding at the rear and flat grinding on the top of the machine. Features: - Consistent belt tension via spring-loaded clamping mechanism - Round grinding device included as standard - For grinding diameters from 20 to 76 mm - Quick and easy adjustment of the desired grinding angle - Graphite coating on the flat grinding surface to enhance the sliding properties of the belt - Large flat grinding surface with protective cover - Slow belt speed (15 m/sec.) – optimal for stainless steel and aluminium grinding - User-friendly, quick belt change - Fast, tool-free switching of grinding rollers - Various grinding angles from 30° to 90° can be set without difficulty - Shorter processing times compared to milling Scope of delivery: - Grinding belt K 36 - Rubber-coated grinding roller - 1 pc. grinding roller for 1 1/4" pipe (42/44 mm pipe) - 2 pcs. flip-up protective screens - Grinding and support table - 2 x dust extraction ports, 75 mm diameter - 2 pcs. chip collection bins - Graphite coating - Motor protection switch

Būklė: naudotas, Gamybos metai: 2008, Techniniai duomenys: Gręžimo galia pliene (skersmuo): 40 mm Išmetimas: 350 mm Gręžimo eiga: 120 mm Gręžimo galia ketaus: 60 mm Veleno tvirtinimas: MK 4 Veleno išmetimas: 350 mm Veleno apsukos: 50–1450 / 18 žingsnių aps./min Padavimas: automatinis / rankinis mm/aps. Maks. atstumas tarp veleno ir stalo: 25–705 mm Stalo tvirtinimo paviršius: 430 x 430 mm Gręžimo stalo reguliavimas: 680 mm Kolonos skersmuo: 150 mm Atstumas nuo veleno centro iki pagrindo plokštės: 1210 mm Bendras galios poreikis: 1,6 kW Mašinos svoris apie: 350 kg Mašinos matmenys apie (I x P x A): 0,95 x 0,55 x 2,3 m Fpodpfxjviqybj Af Asg Stalas reguliuojamas aukštyje (pasukamas ir palenkiamas) Stalas pasukamas 45° į kairę/dešinę ir 360° aplink koloną Sriegiavimas iki M24 Aušinimo skysčio sistema

Būklė: naujas, Bernardo Belt Grinder KBR 100 x 2000 Duo Belt dimensions: 100 x 2000 mm Belt speed: 15 / 30 m/sec Min./max. tube diameter: 20 – 76 mm Carriage adjustment: 30° – 90° Flat grinding table: 400 x 100 mm Contact wheel (diameter x width): 195 x 100 mm Extraction port diameter: 2 x 100 mm Speed: 1410 / 2850 rpm Motor output (S1 100%): 2.2 / 2.8 kW (400 V) Motor input power (S6 40%): 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H): 750 x 1450 x 1160 mm Weight: approx. 158 kg Features - Consistent belt tension thanks to spring-loaded tensioning device - Standard with pipe grinding attachment for tubes from 20 – 76 mm diameter - Fast and simple adjustment of the desired grinding angle - Graphite coating on flat grinding area improves belt glide characteristics - Large flat grinding surface with protective cover - Slow belt speed (15 m/sec) ideal for grinding stainless steel and aluminium - User-friendly, quick and uncomplicated belt change Fpjdpfx Afsd Id Ube Ajg - Fast and tool-free change of grinding rollers - Various grinding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery - Grinding belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 3/4" tube (26/28 mm tube) - 2 pcs. lift-up safety screens - Pipe grinding device - Grinding and support table - 2 x dust extraction nozzles, diam. 100 mm - 2 pcs. chip collection containers - Graphite slip lining - Motor protection switch

Būklė: naujas, - Capacity 1070 x 2 mm - Conical rolling - Removable top roller - Foot control - Emergency stop Fpjdpehc Uvmsfx Af Ajg - Documentation - 400V

Būklė: naudotas, Gamybos metai: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Fully Automatic Wet Deburring Machine for Sheet Metal Model EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width: 1,400 mm Max. workpiece height: 1 – 70 mm Fpsdpfxjt Hw Iis Af Aog Continuously variable feed speed: approx. 1.5 – 8 m/min Comprises 5 processing units: Oscillating sanding roller for abrasive cloth or non-woven abrasives Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, for laminated or non-woven abrasive flaps, adjustable for wear. Brush roller unit for two rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, ideal for removing oxide layers. Wet grinding unit with integrated band filter system and closed water circuit, installed under the conveyor belt and easily retractable from the machine. Washing and drying system, designed for a minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece transport takes place frontally via a continuous conveyor belt (min. part length 350 mm) with vacuum suction system (300 mm width on the right) and a magnetic track with a width of 300 mm, to hold small parts as short as 80 mm. Frequency converter for stepless speed control of the abrasive flap brushes from 250 – 1000 RPM (position 2, top), also for conveyor belt feed. Control panel with clear operation and digital roller position display, 4 ammeters for monitoring roller drives, indicator LEDs. Quick-change mechanism for sideways removal of the abrasive flap brushes plus various spare rollers with non-woven abrasives and brush inserts. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition : good to very good Delivery : ex stock – as inspected Payment : strictly net – after receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Modelis: Amada HFE M2 220t 4m, 8 ašių lankstymo staklės Pagaminimo metai: 2012 Spaudimo jėga: 220 tonų Didžiausias lenkimo ilgis: 4280 mm Eigos ilgis: 200 mm Prispaudimo greitis: 1–100 mm/sek. Lankstymo greitis: 1–10 mm/sek. Sugrįžimo greitis: 1–100 mm/sek. Alyvos talpa: 195 l Variklio galia: Svoris: 17 450 kg Matmenys Staklių ilgis: 5070 mm Staklių plotis: 2075 mm Fedpjv S U Izjfx Af Aspg Staklių aukštis: 3085 mm Atstumas tarp šoninių rėmų: 3760 mm Sijos plotis: 180 mm Stalo aukštis: 960 mm Atvira aukštis: 470 mm Gylis (gargždas): 420 mm

Būklė: naujas, Table length 430 mm Table width 240 mm X travel 225 mm Y travel 160 mm Table height 160 mm T-slots 12 mm Weight 45 kg Dimensions L x W x H 0.6 x 0.45 x 0.2 m Fpjdpfx Ajupw T Rjf Asg Cross table with rotary plate

Gamybos metai: 2023, būklė: naujas, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Structure: steel + aluminium Overall dimensions: 3350 x 2200 x 1300 mm Working area: 3100 x 1520 x 140 mm XY-axis drive, dual-sided gantry drive: 4Nm stepper motors with gearboxes, precision class 8 rack and pinions Z-axis drive: stepper motor with ball screw Traversing speed: up to 25 m/min Z-axis control: THC MyPlasm system Collision protection system to safeguard the torch Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1200 kg SUPPLIED WITH: - Control panel - Water table - Replaceable grate - Control software available in German, English, and Polish - CE declaration of conformity Fpjdpfeh Rabnox Af Asg - Technical documentation (DTR) - Warranty Possibility to select a suitable Hypertherm plasma cutter according to the specific needs of the enterprise.

Būklė: naudotas, Mount: MK 4 Fpjdpfx Afob N Ezre Aog

Būklė: naujas, Gamybos metai: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT Fjdpjud H H Uofx Af Aepg - DIGITAL READOUT - Optional base available TECHNICAL SPECIFICATIONS: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English