Platus juostinis šlifuoklis

Casadei LIBRA 35/2 RTC 110

Būklė: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Bjdpfscr S Ecex Aahewi Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Būklė: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Bwsdpfx Asd H Sc Eoahji Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Būklė: naujas, Gamybos metai: 2025, Concept Easy yra ideali montavimo pagalbinė priemonė kai montuojamos kaištinės jungtys korpuso presavimo metu bei gaminant stalčius. Trumpas pristatymas: • Nedidelis užimamasis plotas, mažiau nei 1,8 m² • Potenciometras beslenkiam spaudimo jėgos reguliavimui Bjdodx Daajpfx Aahowi • Minimali spaudimo jėga: 300 daN (kg) • Maksimali spaudimo jėga: 2200 daN (kg) • 3 presavimo ir reguliavimo greičiai: 5 / 10 / 25 mm/s (su tikslia pozicionavimu / lėtu režimu) • Laisvai nustatomas presavimo laikas su automatinio atidarymo funkcija

Būklė: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Bwjdpfx Aogtm U Asahji Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: naudotas, Zu verkaufen: Salmatec Maxima 700 Pelletpresse in einwandfreiem Zustand, installiert in einem Rematec-Container mit Schaltschrank und Zelthalle. Kapazität – bis zu 3 t/h. Die Linie umfasst: - Presse und Hammermühle: Salmatec – bewährte deutsche Qualität mit hoher Effizienz und Langlebigkeit. - Förder- und Dosiertechnik: Rematec – robuste und präzise Materialförderung in allen Prozessschritten. - Zusatzausrüstung: Zyklone, Siebe, Kühler, Schaltschrank usw. - Zelthalle. Wichtige Vorteile: - Hohe Produktionsleistung – bis zu 3 t/h. - Hochwertige Komponenten europäischer Hersteller. - Geeignet für die professionelle Pelletproduktion aus Holzbiomasse, Agro-Biomasse oder anderen Rohmaterialien. - Voll funktionsfähige Linie – Vorführung möglich. - Sofort verfügbar. Demontage und Transport sind vom Käufer zu organisieren. Wir können eine geeignete Fachfirma für diesen Prozess empfehlen. Bwsdpfx Aaeit I Rtshji Die Anlage kann im voll funktionsfähigen Zustand in Schweden besichtigt werden. Alle Fundamentpläne und DWG-Dateien sind vorhanden. Preis: EUR 650.000

Būklė: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Bwjdjw I Uxcspfx Aahoi Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Bwsdpfxogf Sw Nj Aahji Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Būklė: naujas, Tipas: 1300-2S Darbinis plotis: 1300 mm Minimalus ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo veleno greitis – su dažnio valdymu Bwsdpfxem Dr Rge Aahsi Padavimo greitis: 5–20 m/min Bendra variklių galia: 6,27 kW Transporto matmenys: 1700 x 2100 x 1400 mm Svoris: 1200 kg Kaina: 6100 Eur (EXW Jonava, Lietuva)

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Bedpfx Aajg A D Anehswi Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Būklė: naujas, Gamybos metai: 2026, HOLZING RLA X3 VIBER Capacity 26,900 m³/h with sawdust auger (rotary valve, screw conveyor) Capacity approx. 26,900 m³/h Dimensions: 1920 x 4685 x 6285 mm Filter type: 100% polyester, 5 micron Buffer storage volume: 8.53 m³ Filter size: Ø160 mm, Length: 1680 mm Number of filters: 144 Filter area: 123.84 m² Filter thickness: 1 mm Pressure chamber: yes 0.75 kW geared motor for screw conveyor Rotary valve: 0.75 m² 0.17 kW vibration motor Speed: 3000 rpm Power: 40 kW Bjdpelk Dtnsfx Aahswi Number of turbines: 2 Transport dimensions (L/W/H): 10/2.5/2.7 m Weight (extraction unit + 2 turbines): 3100 kg