Platus juostinis šlifuoklis

C.B. 1030 2/22

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander Guedpjlht Hzofx Ap Isc With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, Technical data: Working width: 1100 mm Gjdpfx Apogtm U Ao Ieuc Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Būklė: beveik kaip naujas (naudotas), Arbeitsbreite 1350 mm Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten, neuwertigen Zustand. Gjdpfeuuitgox Ap Ijuc

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Gedpfx Apjg A D Ans Ijuc Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features Gedod N S T Dspfx Ap Iouc • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operating side: left - Gun drive: single design - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed: 1.5 - 7 m/min - PLC control with touchscreen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm Gjdpfx Apjv N D Ewo Ieuc - Height: 2,600 mm - Total connected load: ~ 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide an offer for the installation and commissioning of the system, as well as training of your employees. Upon request, we can also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Būklė: naudotas, mašinos/transporto priemonės numeris: 008394, Maks. plokštės plotis: 3800 mm Maks. plokštės ilgis: 3800 mm Maks. pagrindinio pjūklo disko išėjimas: 55 mm Godpfeygtbtex Ap Ieuc Spaustukų skaičius: 4

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner rounding unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless control of processing functions, as well as L-Motion control (6-axis). Suitable for ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece height from 10 – 60 mm. • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof design with glue supply from below (excess glue is automatically recirculated to the glue pot), precisely controllable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue from burning if the machine is not used for a longer period but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for quick colour change Optional: Quick-change system for glue pot • Pressure zone consists of a driven pressure roller synchronised with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension, ensuring optimal bonding of the edging material to the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, two saw blades. Pneumatic swiveling from operator panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with carbide-tipped special cutters Motorized adjustment of the milling station (4x L-Motion) • Corner rounding unit: Automatic processing of front and rear corners up to 2 mm edge thickness for PVC/ABS edging material. (Not recommended for soft- and post-forming profiles). Option for single-sided (front or rear) or double-sided corner rounding. Gjdpel Rix Eofx Ap Iouc Motorized adjustment of the corner rounding unit (1x L-Motion) • Swiveling control panel with 10″ colour touchscreen, length counter and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finish units (3 free spaces): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder, radius changeover R1/R2 via pneumatic switching from the control panel -Flat scraper unit: Removes glue residues from the glue joint area with a gentle scraping action, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors with 0.09 kW, 1,500 rpm provide a high-quality finish

Būklė: geras (naudotas), Gamybos metai: 2019, CNC průchozí obráběcí centrum FELDER GROUP FORMAT4 CREATOR 950 (rok výroby 2019) s lepením a vkládáním kolíků, frézovací jednotkou o výkonu 12 kW s upínáním HSK-F63, integrovanou pilou Ø 120 mm, kolíkovací jednotkou a posuvem až 90 m/min představuje kompaktní řešení pro přesné frézování, vrtání a formátování dřevěných panelů. Klíčové technické výhody - Zabírá pouze 5 m² plochy Ideální pro provozovny s omezeným prostorem. - Snadné upínání a programování Rychlý a intuitivní provoz, vhodný i pro méně zkušené uživatele. - Kompaktní, výkonný a rychlý Perfektní volba pro malé dílny, které vyžadují profesionální výsledky. Pokročilé funkce - Jednotka pro lepení a vkládání kolíků - Frézovací jednotka 12 kW (až 24 000 ot/min) - Automatické měření délky obrobku - Automatická výměna nástrojů (lineární zásobník na 4 pozice) - Vrtání ze všech pěti stran - Drážkování s integrovaným pilovým kotoučem Guedpfx Ajwyvgaop Ijc - Obrábění ze všech čtyř stran obrobku - Opracování dveřních výplní Pohon - Vřeteno: HSK F63 - Počet os: 3 Pohyby os - Zdvih v ose X: 3000 mm - Zdvih v ose Y: 950 mm - Zdvih v ose Z: 80 mm Nástroje - Maximální hmotnost nástroje: 7,5 kg Pracovní stůl - Nosnost stolu: 130 kg Doplňkové vybavení - Balíček online vzdálené servisní podpory - Automatické centrální mazání CENA BEZ DPH.

Būklė: naudotas, mašinos/transporto priemonės numeris: 005289, Darbinis plotis X ašis: 7400 mm Darbinis plotis Y ašis: 1550 mm Gedpfx Apewcyacs Isuc Darbinis paviršius: Nestingo stalas Pagrindinio veleno galia: 11 kW Kontroliuojamų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 10 Įrankių pozicijų skaičius: 14