Elektrinis šoninis krautuvas

Bulmor JEQn50/14/75TV - TRIPLEX

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Ibsdpfxeu R Szaj Af Hsa Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Gamybos metai: 1992, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: Div1, Technical data: 1x Demag KBK 1 pillar-mounted slewing crane SWL 125KG with chain hoist Load capacity at full outreach: 125KG / 0.125t SWL Height: approx. 3.5 m Underside of jib: approx. 3 m Outreach: approx. 4 m Hook height: approx. 2.55 m Total weight: approx. 450 kg Supplied with steel or Demag chain hoist 125 kg, depending on stock. Including pins, cable trolley, travel carriage, end cap, etc. Various cranes in stock Slewing range: 300°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Iodpfsng H T Usx Af Heba Other cranes with capacities from 80–5000 kg available, please enquire See pictures Shipping by forwarding agent or collection only by appointment

Būklė: naujas, Load capacity 500 kg. Number of suction pads: 6 units Suction pad diameter: 215 mm Suction performance: 8.0 m³/h Crane lifting eye: 80.0 mm Voltage: 400 V Total power consumption: 0.18 kW Machine weight approx. 120 kg Space requirement approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust load-bearing structure made of steel Ibedjxak Ddepfx Af Hea - Painted in RAL 2000 with low dead weight - Galvanised longitudinal beam, length: 2,400 mm - 3x galvanised crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, high-quality dry-running rotary vane vacuum pump - Suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Extendable operating handle to 1,000 mm from centre of beam - Stable metal pocket for your crane control unit - Operation "Suction/Release" via manual slide valve - Control and safety device for vacuum lifter * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release function - Fine dust filter for vacuum pump protection - Documentation * Special accessories included: - 6x ball valves for individually disabling suction pads * Allows handling of smaller panel formats * Without the need to move suction pads or beams - Small spiral connection cable * Extension length 3,500 mm, designed as * Extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device

Būklė: naujas, • Arbeitsbereich 3300 mm X, 200 mm Y, 180 mm Z • 1 x vertikale Elektrospindel 7 kW mit Säge • 1 x vertikale Elektrospindel 7 kW, 12–18.000 U/min • 1 x Elektrospindel 1,7 kW mit Punkt-zu-Punkt-Bohraggregat (vertikal/horizontal) • 1 x horizontale Elektrospindel 5,6 kW, 12–18.000 U/min Isdpon Nv S Tsfx Af Heba • 4+4 Werkstückauflagen, verfahrbar auf der X-Achse, jeweils ausgestattet mit verstellbaren pneumatischen Werkstückspannern • Linke und rechte, einziehbare Werkstück-Referenzanschläge • Separater Schaltschrank mit Handbediengerät zur Maschineneinrichtung • Einfache parametrische Programmierung mit 3D-Bearbeitungsmodellen • Umfassende Sicherheitseinhausung mit Fronttüren, vertikale Öffnung, synchronisiert mit dem Maschinenzyklus

Gamybos metai: 1993, būklė: naujas, Load capacity: 10 t Lowest height (top): 800 mm Iodpfxsdc Sx So Af Heba Lowest height (foot): 100 mm Lift: 400 mm Max. lifting height: 1200 mm Weight: 42 kg

Gamybos metai: 2014, būklė: geras (naudotas), „Elumatec SBZ 130“ – tai 3 ašių apdirbimo centras, skirtas efektyviai apdirbti aliuminio, plieno ir nerūdijančiojo plieno profilius. Visos operacijos, tokios kaip frezavimas, gręžimas ir sriegimas, atliekamos ant nejudančio profilio, todėl apsaugoma jo paviršius. – Ašys: 3 ašių valdymas, su įrankių velenu kaip papildoma ašimi. – Apdirbimo ilgis (X ašis): 7200 mm – Eiga (Y ašis): standartinė – 485 mm (maks. greitis 60 m/min.) – Eiga (Z ašis): standartinė – 340 mm (maks. greitis 60 m/min.) – Veleno greitis: standartinė – 6000 aps./min., pasirenkamas didelio greičio velenas (18 000 aps./min.) – Veleno galia: 5,5 kW – Įrankių saugykla: integruota revoliucinė galvutė, talpinanti 8 įrankius, arba 4 kampinės galvutės, užtikrinančios greitą įrankių keitimo laiką – Valdymas: operacinė sistema „Windows“ su „eluCam“ programine įranga; 18,5 colio „PC“ skydelis su USB prievadais ir tinklo jungtimi – Tvirtinimo sistema: automatinė pneumatinių tvirtiklių padėčių nustatymo sistema – Oro slėgis: 7 barai ĮRANGA: Iodpfx Asyt H Uyef Hjba Paruoštas įrankių rinkinys, skirtas PVC ir plieno apdirbimui: – įrankių laikikliai, – reduktorius, skirtas plienui apdirbti, – specialūs įrankiai su drožlių nukreipikliu, – specialios programos, skirtos durų profiliams apdirbti. 2025 m. buvo pakeista galvutė.

Gamybos metai: 1973, būklė: naudotas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 mm/min Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Drilling radius max./min: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pcs. T-slot pitch: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirements approx.: m² Isdpfsgmu A Sjx Af Hjba Support travel: 590 mm Without rotary table, without tools

Gamybos metai: 2006, veikimo valandos: 7 000 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga (išilginė ašis) mm 7280 Y ašies eiga (skersinė ašis) mm 525 Z ašies eiga (vertikali ašis) mm 380 A ašies pasukimas (veleno pasukimas) mm nuo 0° iki 180°, tęstinis Didžiausias X ašies pozicionavimo greitis m/min 80 Didžiausias Y ašies pozicionavimo greitis m/min 60 Didžiausias Z ašies pozicionavimo greitis m/min 30 Didžiausias A ašies pozicionavimo greitis Nuo 0° iki 90° per 1 sek. Elektroveleno galia kW 7 Iedjyi Umpjpfx Af Hjba Elektroveleno sūkių dažnis aps./min kintamas iki 20 000 Įrankių tvirtinimas HSK-40E Įrankių keitimo sandėlio talpa, vnt. 8 Spaustuvų kiekis, vnt. 8 Automatinis spaustuvų pozicionavimas Bendra instaliuota galia kW 16 Maitinimo linijos nuotėkio srovės relė A 0,3 Svoris t 4,8 Darbinis slėgis bar 6 ÷ 8

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Produktpalette, tuščias svoris: 4 860 kg, didžiausias leistinas svoris: 23 140 kg, bendras svoris: 28 000 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 13 650 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 800 mm, bendras ilgis: 13 800 mm, bendras plotis: 2 550 mm, bendras aukštis: 2 538 mm, pakaba: oras, padangos dydis: 235/75 R17,5", padang padangų: 100 procentas,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, TM-California-4: 4-axis CNC machining center type California/4-4 - CNC machining center suitable for aluminum profiles - Automatic opening and closing of the protective cover - Spindle movement via linear guides and servo motor - Equipped with ISO 30 spindle - Power: 7.5 kW and speed: 24,000 rpm - Electrically rotatable spindle from 0° to 180° - Pneumatic profile stops on the left and right sides - 6 pneumatic profile clamps - Profile clamps are manually positioned as standard - Tool magazine on the right with 6 positions + disc cutter - Automatic tool change - Automatic cutter length measuring system - Automatic cooling spray system with micro-dosing - Industrial PC and service system with remote control - 21.5" PC with Windows 10 operating system Iedpfx Aex Hd Hzof Hsba - Includes Uni-Link CADCAM software with Uni-Link On Board - User-friendly interface for operation and visualization - Workable length: 4,200 mm - Workable profile cross-section: 230 x 230 mm - Accuracy: 0.1 mm/m