Emmegi Comet E Pendolare apdirbimo centras

Emmegi Comet E Pendolare

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request. Kedpsxmhdnefx Abrjwu

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Kwjdpfjuhazgox Abrou - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination Kjdpfx Aenxh T Rsbrswu * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Kjdjvzhf Sepfx Abrowu Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Inlijn blik-/pottenwasser en -droger Volledig van roestvrij staal Kwedpfx Aeh Eazzebrsu Maximale containergrootte: 180 mm breed, 250 mm hoog Verkoopcondities: in huidige staat of getest en aangepast naar klantspecificatie

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 7 500 kg, For sale: CNC 5-axis machining center from DMG, model DMU 60 P The machine is fully functional and ready for immediate operation. In 2021, a new spindle was installed and all maintenance work was carried out. Service history: 2019: New ballscrew (KGT) 2021: New spindle 2022: Operated in single-shift operation 2023: Occasional job orders 2024: Taken out of service but still powered 12/2025: Disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Kedowbhq Hjpfx Abrowu Floor space requirement (approx.): 7.0 x 6.0 x 2.7 m Machine weight (approx.): 7.5 t No fixtures or vises included in the offer. Transport and loading can be organized Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF MANUFACTURING & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, DOOSAN PUMA 400LMA FANUC 32i (Metai 2011) PAGRINDINĖS SPECIFIKACIJOS: - CNC FANUC 32i su 10,4” LCD spalvotu ekranu ir Manual Guide - Suvystymo skersmuo virš lovos: 770 mm - Suvystymo skersmuo virš skersinio stalo: 590 mm - Maks. tekinimo skersmuo: 560 mm - Maks. tekinimo ilgis: 2 064 mm Kedsyb Sqpspfx Abrswu - X/Z ašių eiga: 357 mm / 2 155 mm - Strypo pralaidumas: 90 mm - Hidraulinio griebtuvo skersmuo: 400 mm - Velenas: 22 kW / 3 000 aps/min (ASA A2-8) - BMT 75P revolveris su 12 pozicijų ir gyvomis priemonėmis - Gyvų įrankių galia: 7,5 kW, 3 000 aps/min ĮTRAUKTA ĮRANGA: - S-HS-12 hidraulinis griebtuvas, 305 mm skersmens, su žandikaulių rinkiniu - C ašis 360º (0,001º) - Automatinis įrankių matuoklis - Programuojamas užpakalinis centras - Aukšto slėgio pompa 14,6 bar - Drožlių transporteris - Hidraulinės atramos paruošimas (bazė, logika, hidraulika) - SMW SLU X-4-ZS hidraulinė atrama, 30–245 mm skersmens - Pilnas įrankių laikiklių komplektas: 4 vidiniai, 4 išoriniai, 4 rotaciniai (2 kampiniai, 2 tiesūs)* - Dokumentacija ir vadovai BŪKLĖ: Staklės puikios būklės, įjungtos, galima apžiūra Barselonoje

Sąlyga: geras (naudotas), Gamybos metai: 2000, Sunkus tekinimo staklės ERNAULT SOMUA P72 su 3 kreiptuvais skersmuo virš lovos 2200 mm skersmuo virš suporto 2000 mm sukimosi greitis nuo 1,5 iki 3000 aps./min - 75 AG staklių svoris 39 t galimas svoris 16 t Kjdsxq D Tyjpfx Abrowu staklės veikia, galima apžiūrėti

Sąlyga: naudotas, TECHNINIAI DUOMENYS STALAS - Stalo dydis: 3100/800 [mm] - Didžiausia stalo apkrova: 7000 [kg] - X/Y/Z ašių eiga: 3000/1000/1200 [mm] - Greitasis važiavimo greitis (X/Y/Z): 15000/15000/15000 [mm/min] FREZAVIMO GALVA Rankinė galva VIRPSTĖ - Įrankio tvirtinimas: ISO50 - Sukimosi greitis: 4000 [aps./min.] - Variklio galia: 27 [kW] ĮRANKIŲ KEITIKLIS - Keitiklio tipas: Skėtis (Parapluie) - Įrankių skaičius žurnale: 24 SVORIS IR IŠMATAVIMAI - Užimama vieta: 7913/5043 [mm] - Staklių aukštis: 3440 [mm] - Staklių svoris: 13410 [kg] ELEKTROS TIEKIMAS - Maitinimo įtampa: 400 [V] - Bendra variklių galia: 38 [kW] DARBO VALANDOS - Veikimo valandos (įjungta): 24689 [val.] - Darbo valandos: 23809 [val.] Kodpfxew Tnhbo Abrewu - Virpstės darbo valandos: 7658 [val.] PRIEDAI - Valdymas: Heidenhain iTNC530 - Elektroninis rankinis ratukas - Sąsaja: RS232/RJ45/USB - Teach-In programavimas - Aušinimo skysčio bakelis - Įrankių laikiklis

Sąlyga: naudotas, X ašies eiga: 1250 mm Y ašies eiga: 1100 mm Z ašies eiga: 900 mm Veleno ištrauka (W): 710 mm B ašis: 360° Stalo tvirtinimo matmenys: 1000x1120 mm Didžiausia stalo apkrova: 3000 kg Veleno kūgis: ISO 50 Veleno apsukos: 2500 /min. Ksdox Dz Rcspfx Abrjwu Pagrindinio variklio galia: 20 kW Bendri įrenginio matmenys IxPxA: 6130x3600x2750 mm Bendras įrenginio svoris: 12400 kg Valdymo sistema: Heidenhain iTNC 530 Priedai: operatoriaus kabina, įrenginio gaubtas, matavimo zondas TS 460, įrankių laikikliai Veleno darbo valandos: 8500