Plati juostinis šlifuoklis

BULDOG 7

Būklė: naudotas, Gamybos metai: 2017, Direct numerical control NC HOPS with Campus software Working area in X-axis mm 3400 Working area in Y-axis mm 1600 Working area in Z mm 300 Worktable with 6 adjustable rails No. 3 suction cups per rail for holding the workpiece No. 1 electrospindle with 5 axes, 10 kW, with automatic tool change, cone type HSK F63 Drilling head with 24 spindles as follows: 12 vertical spindles along Y-axis, 6 vertical spindles along X-axis, 4 horizontal spindles along Y-axis, 2 horizontal spindles along X-axis Automatic tool changer system with 18 positions - located at the rear of the machine Front guard and safety system with mats and perimeter nets Automatic lubrication system Air conditioning for the control cabinet No. 1 vacuum pump Rjdpfx Afjwwiybenor

Gamybos metai: 1997, būklė: geras (naudotas), • Working width (mm): 1300 • CSD system • Cross sanding unit Rodpfx Aoidi Ivefnor • Longitudinal sanding unit - shoe • Brush unit • Ionization

Būklė: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm Redpfx Afowwl Nlsnor T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. clamp jaw opening: 90 mm Min. panel dimensions from the rear: 1,830 x 915 mm Max. panel dimensions from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of the scorer relative to main saw QUICK CHANGE: rapid blade change at the touch of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on the pusher with double fingers 3 front aligners 16 support roller rails behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement mechanism for table 2 Automatic ejection of end pieces beyond the cutting line Material support surface under pusher with brush-lined rollers, suitable for sensitive surfaces Machine table with air nozzles for delicate surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring the main spindle speed Software package: - QUICKOPTI for cutting pattern optimization directly at the machine - OSI PLUS INTERFACE VERSION - OPTIPLANNING optimization software incl. hardware dongle, permits management of up to 10 users via network - OS LABELLING: graphic editor in the machine control, including drawing of workpieces, real-time label printing at the machine possible - COMMUNICATION STORAGE FEED SYSTEM - SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotating suction frame 0 - 180 degrees equipped with controlled axis Panel alignment/squaring system consisting of 3 photoelectric cells mounted on pneumatic cylinders Redpfoxranpex Afnsr Panel weight detection via load cell installed on the suction frame in the separation area, checks whether the specified weight is within the expected range for this panel type. If not, the panel is set down again and the separation cycle is restarted. Roller conveyor for loading and unloading stacks 4,200 mm Software: LINE SUPERVISOR with storage mapping, catalog, import of processing data from the optimizer, management of parts lists, system control

Būklė: naudotas, Gamybos metai: 2014, CNC-controlled 5-axis machining centre with gantry design for milling and drilling workpieces made of wood or wood-based materials. Console table with 8 consoles Vacuum system WoodWop package for AV-PC Rjdpfxjxvaymo Afnsr LED position indicator system for manual positioning of vacuum clamps and consoles. Positioning accuracy: +/- 2.5 mm 5-axis main spindle 10 kW Drive5C. Articulated 5-axis head for milling, drilling, and sawing at any angle. - Interface for HSK F 63 - Z-axis travel 450 mm - Liquid cooling with temperature monitoring - Spindle with hybrid bearings for maximum precision and long service life - Frequency converter for electronic speed control 0–24,000 rpm - Maximum tool weight: 6 kg including holder - Maximum tool length: 230 mm measured from the bottom of motor spindle - 18-fold carousel tool changer, bottom mounted Drilling head with 21 spindles, 2.2 kW Vertical spindles: 17 Max. drill diameter: 35 mm Total drill length: 70 mm Shank diameter: 10 mm Horizontal spindles: 4 One reinforced drilling spindle with holder for slot saw Max. drill diameter: 10 mm Total drill length: 70 mm Drill shank diameter: 10 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track elements): 9 pcs Clamping grippers: 7 pcs, first 3 pieces: 2-finger Air cushion table, width: 650 mm, 4 pcs at 2160 mm length Central blower: 1 pc with increased blower capacity – 3 angled-lift clamping grippers (2-finger) – 1 angled-lift clamping gripper (1-finger) – 1st air cushion table: 800 mm wide – Speed package: Saw carriage feed rate 1 – 150 m/min Rsdpfxeymx S Do Afner Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width: 0 mm, max. pressing width: full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label software / label printer PICA 104

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Naudotas BIESSE Selco WN2 pjūklas Rodpfxeyrr U Ne Afnor - OSI valdymas - Etikečių spausdintuvas - Metai: 2017 - Galimas nuo balandžio - Pjovimo aukštis 60 mm - 1-80 m/min - Greitas pjūklo disko keitimas - 4 oro pagalvės stalai

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) Redpoxy Tmnefx Afnjr C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, CNC apdirbimo centras BIESSE Rover C 6.50 CONF.2, 2007 metai Darbo zona: apie 140 × 460 cm Staklių matmenys: 300 × 650 cm Svoris: apie 6 100 kg Rjdpfew Rpd Sex Afnor Dvi darbinės galvos Įrankių sandėlis: 22 pozicijos Vertikalūs gręžimo velenai: 28 vnt. Horizontalūs gręžimo velenai: 12 vnt. Kaina derinama, galima iškart. Kaina nurodyta be PVM.

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Rsdpfxjv I Akvo Afnjr Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035