Krašto darbuotojas

Brandt KDF 220 C

Sąlyga: naudotas, Gamybos metai: 2014, Used machine Single-sided edge banding machine Brandt Optimat KDF 220 C (Ambition 1220 FC) Year of manufacture: 2014 Machine number: 0-261-20-7913 Fixed fence on right side Manual adjustment of infeed fence Feed rate: 11 m/min Maximum feed rate with contour trimming unit: 11 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Workpiece and edge parameters: Minimum workpiece width: - for workpiece thickness 8-22 mm: 70 mm - for workpiece thickness 23-60 mm: 120 mm Workpiece projection: 38 mm Workpiece thickness: 8 - 60 mm Maximum edge height = workpiece height + 5 mm Edge material, rolls: 0.4 - 3 mm Maximum edge cross-section: - for PVC: 135 mm² - for veneer: 100 mm² Maximum roll diameter: 830 mm Edge material, strips: 0.4 - 3 mm Maximum edge cross-section (strips): 165 mm² Edge thickness up to 6 mm possible by adjusting pressure zone Ndedpfx Acjxx D D Ue Aed Unit configuration: Jointing cutter unit 2 x 2.2 kW 200 Hz (with and against feed) Gluing unit A3 with workpiece preheating End trimming unit, bevel/straight 2 x 0.18 kW Milling unit 2 x 0.27 kW counter-rotating Contour trimming unit (corner copying) 1 x 0.35 kW WD 40 Profile scraper with quick-change heads Glue joint scraper 5820 Control system: Easytouch Dimensions: approx. 4280 x 1300 x 1170 mm Weight: approx. 1400 kg Availability: short-term Location: Flörsheim

Gamybos metai: 1999, Sąlyga: geras (naudotas), KRONEN K 50-4 Ndodpfxou Iv Avo Ac Aod ID-Nr. 2834 Kronen Salatschleuder Modell K-50-4 zum Trocknen von Gemüse, Obst, Salaten usw. Kapazität bis zu 1.200 kg/Stunde, abhängig vom Produkt. Abmessungen: 85 x 60 cm, Höhe 100 cm.

Sąlyga: naudotas, Gamybos metai: 2011, Tipas: KDF 220 C Metai: 2011 Aparatas valdomas per ekraną Ndedpfx Acexc N Hvo Aed Klijavimo agregatas Pjovimo agregatas Lyginimo frezavimo agregatas Kampų kopijavimo agregatas Spindulio grandiklis Paviršiaus grandiklis Briaunos storis: 0,4 - 3 mm Ruoinio storis: 8-50 mm Padavimo greitis: 10 m/min Bendra galia: 9,5 kW Ilgis: 4150 mm Svoris: 1150 kg 19990 € su PVM, nurodoma sąskaitoje

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial Number: 2200139 CNC Controller: FANUC 18 iMD Location: Tabaza (Asturias, Spain) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Cross Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle Nose to Table Distance: 220 ~ 1035 mm Spindle Nose to Column Distance: 865 mm Spindle Taper: BT50 Spindle Speed: 30 – 6,000 rpm ZF Gear Change (2 speeds): Yes Maximum Tool Weight: 15 kg Maximum Tool Size (Diameter x Length): 125 x 300 mm ATC (Automatic Tool Changer) Maximum Tool Size: Ø125 x L250 Maximum Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feedrate: 1 – 10,000 mm/min Rapid Traverse Rates (X / Y / Z): 18 / 18 / 18 mm/min Ndedeqwyzfepfx Ac Aed Motor Main Spindle Motor (30 max. power): 15 / 18.5 kW Axis Drive (X, Y, Z): X: 5.5 | Y: 5.5 | Z: 5.5 Coolant Pump CTS: One air & two coolant pumps – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm.

Sąlyga: naudotas, Gamybos metai: 2008, Steuerungssystem: OKUMA OSP-P200M. Spindelkühlung durch die Spindel. Drehachse: A, Tsudakoma 250. Ndjdpfxjwrnapo Ac Asd Zubehör: Späneförderer, Messtaster RENISHAW OMP40 sowie Werkzeugvermessung. Aufspanntisch: 1000 x 460 mm Verfahrwege der Achsen: Achse X: 762 mm Achse Y: 460 mm Achse Z: 460 mm Spindel: 50 – 8.000 min⁻¹ Aufnahme: DIN 40 Anzahl Werkzeugplätze im Werkzeugwechsler: 48 Maschinenabmessungen (L x B x H): 2.805 x 2.160 x 2.746 mm Gewicht: 7.100 kg

Sąlyga: naudotas, Gamybos metai: 2013, Technical Data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power requirement: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical Features and Equipment General Functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double top pressure for workpiece stability Electronic thickness control Feed frequency inverter Automatic lubrication of the feed chain Automatic motor calibration Touchscreen control system Emulsion spray unit at infeed and outfeed Edge preheating Pre-milling Unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing Unit Adhesive and hot air application Heated application roller Quick-change complete unit Automatic motorized position adjustment 3 pressure rollers Njdov Szt Dopfx Ac Aodd Edgebanding speed: 14 m/min End Trimming Unit Twin-motor unit with automatic tilting Tilting up to 15° THK prism guides Radius Milling Unit 2 tools Automatic adjustment in two axes Automatic overlap setting Copying Unit (2 motors) Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, ištraukimo jungties skersmuo: 120 mm, pjūklų disko skylė: 30 mm, pjovimo gylis: 110 mm, pagrindinis pjūklo diskas skersmuo: 400 mm, ekstrakcijos antgalio skersmuo: 120 mm, ilgio ribotuvas: 3 200 mm, darbinis plotis: 1 100 mm, Įranga: variklio stabdis, Format 4 x motion in excellent condition, always operated by a single person Nedpfev Aywpex Ac Asdd

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 693068, bendras svoris: 7 300 kg, galia: 30 kW (40,79 AG), Walter Helitronic Vision CNC Werkzeug- und Schneidwerkzeugschleifmaschine mit Palettenlader Universelle Werkzeug- und Schneidwerkzeugschleifmaschine (CNC-gesteuert) Hersteller: Walter, Modell Helitronic Vision, Seriennummer 693068, Baujahr 2008 Beschreibung: Geeignet zur Herstellung und Nachschärfung von Werkzeugen für Metall- und Holzbearbeitung aller Art. Die Maschine kann unter Strom besichtigt werden. Technische Daten: • Längsbewegung (X-Achse): 480 mm • Vertikalbewegung (Y-Achse): 320 mm • Querbewegung (Z-Achse): 700 mm • Drehtisch Schwenkbereich (C-Achse): +/- 200° • Werkstückaufnahme: ISO 50 • Max. Werkstückdurchmesser: 320 mm • Werkstücklänge Umfangschleifen: 370 mm Njdpsuqzdpjfx Ac Aedd • Werkstücklänge Stirnseitige Bearbeitung: 320 mm • Lineare Auflösung Genauigkeit: 0,0001 mm • Radiale Auflösung: 0,0001° • Spindeldurchmesser: 100 mm • Schleifscheibenaufnahme: HSK50 • Schleifscheibendurchmesser: 200 mm • Schleifspindeldrehzahl: 0 – 12.000 U/min • Max. Leistung: 30 kW • Anschlussleistung: 35 kW (460 V / 60 Hz) • Gewicht ca. 7.100 kg • Maschinenabmessungen (L x B x H): 3649 x 2490 x 2301 mm Zubehör: • Vorrichtung zum Öffnen der Schleifscheiben (auf den Bildern sichtbar) nicht im Lieferumfang • Stufenlose Drehzahlregelung, Messtaster, pneumatische Werkstückspannung • Elektrostatik-Nebelabscheider • Feuerlöschsystem • Ölauffangwanne, 2 Schleifscheibenflansche, kompletter Satz Betriebsanleitungen • Turmoil Drive Chiller • Laderpaletten: 8 Stück – 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1-1/4" • 10 Stück HSK-Aufnahmen für Schleifscheiben Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • Der Computer wurde aufgerüstet und bietet sehr schnelle Werkzeugdarstellung in Tool Studio Zustand: • Hervorragender Zustand, sehr präzise und reproduzierbare Ergebnisse. Y-Achse im Oktober 2023 komplett überholt: Linearmotor, Führungen, Kompensationszylinder und Festo-Boosterpumpe durch United Grinding erneuert. • Es wurde ein 1-Mikron-Filtersystem (nicht enthalten) verwendet, die Maschine ist daher äußerst sauber gehalten worden. • Verladung auf einen offenen LKW für $1.200 möglich. Alternativ erstellen wir auf Wunsch gerne Versandangebote und bieten eine Exportverpackung für den Seetransport an.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Njdeul Efmspfx Ac Aedd Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: naudotas, Gamybos metai: 2011, bendras ilgis: 4 000 mm, bendras aukštis: 1 600 mm, bendras plotis: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking: Yes - Serial number: AH/115214 - Number of units [pcs.]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Gluing unit - └ 3rd unit type: End trimming unit - └ 4th unit type: Rough trimming unit - └ 5th unit type: Radius scraper unit - └ 6th unit type: Flat scraper unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages [pcs.]: 1 Ndodpfx Ajwnickoc Aod Financial Information VAT: The price stated is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for everything in the industrial sector Yorick Diebels