2016 Brandt Highflex 1440 - KDF 440

Brandt Highflex 1440 - KDF 440

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Panelinė pjovimo staklė Selco WNT 630 3800x2200 TECHNINIAI DUOMENYS: Maksimalus pjovimo ilgis: 3800 mm, Maksimalus pjūklo disko išsikišimas: 108 mm, Maksimalus griebtuvo atidarymas: 100 mm, Minimalūs plokštės matmenys ant pakeliamo stalo: 1830 x 915 mm, Maksimalūs plokštės matmenys ant pakeliamo stalo: 3660 x 2200 mm, Maksimalus rietuvės aukštis: 630 mm, Minimali užkrovimo storis ant pakeliamo stalo: 10 mm, Nljdpfev T Sdisx Aduoi Darbinio stalo aukštis: 985 mm, Stalo keliamoji galia: 5 t Užpakalinis užkrovimas ant pakeliamo stalo su varomaisiais ritinėliais ir automatinio rietuvės padėties nustatymu pradiniame taške Varomieji ritinėliai ant pakeliamo stalo pjovimo staklėms 3800 x 2200 mm su šoniniu užkrovimu

Sąlyga: naudotas, Gamybos metai: 2015, veikimo valandos: 4 500 h, bendras svoris: 5 050 kg, kuro tipas: dyzelinas, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, nominali (akivaizdi) galia: 500 kVA, nepertraukiama (akivaizdi) galia: 1 kVA, sukimosi greitis (maks.): 1 500 aps./min, kuras: dyzelinas, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Generator: Diesel, FOGO FDG 500VS, engine: Volvo Penta TAD1641 GE, year of manufacture 2015, operational, approx. 4,500 hours Nedpfx Ajvb I H Aodujli

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Nlodpfx Aehymgdjduji Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm

Sąlyga: geras (naudotas), Gamybos metai: 1991, pjovimo plotis (maks.): 1 050 mm, pjovimo aukštis (maks.): 135 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 930 kg, galia: 5,5 kW (7,48 AG), Įranga: dozatorius, MAKA SC 3200 Sliding Table Panel Saw with Scoring Unit Manufacturer: MAKA/Griggio Technical Data: Sliding table length: 3200 mm Cutting length: 3300 mm Cutting width right of saw blade: 1050 mm Max. saw blade diameter: 400 mm Max. cutting height: 135 mm Saw blade tiltable: 0-45° Cutting height at 45°: 90 mm (with 400 mm saw blade) Main motor: 5.5 kW / 400 Volt 3 speeds: 3,000 / 4,000 / 6,000 rpm Scoring unit motor: 0.75 kW Scoring blade diameter: 125 mm Nodpfxjp H Tgbe Adusli Extraction port: 120 mm Wide and narrow safety hood Dimensions: 3250 x 3100 x 830 mm Weight: 922 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007793, Uždedamos briaunos tipas: plona briauna, stora briauna, fanera Klijavimo sistema: EVA Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Nljdov Tfydepfx Aduei Maks. padavimo greitis: 11 m/min Didžiausias plokščio storis: 60 mm

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: Nedpfxexfh Tmj Adujli - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: naujas, Gamybos metai: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for producing line boring holes • 20 mm drill bit for creating Minifix systems • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinges • Panel thickness that can be processed: 12-40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Njdpfx Aod Hz Nijdueli Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis, panel thickness from 12 mm to 40 mm • A-axis: 360° • Feed speed: 20 m/min • Minimum panel dimensions (X): 300 x (Y): 120 x (Z): 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V / 3x 230V • Minimum required extraction capacity: 2300 m³/h

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, reikalingas aukštis: 1 200 mm, Edge bander equipped with: - Trimmers Nsdpfx Ajwy Ugxeduoli - Edging tape magazine - Interchangeable hotmelt EVA or PUR glue pot - Flush trimming - Corner rounding units

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-250-87-6869, Gręžimo galvutė su 8 velenais (V8 SW/32) Nlodpfx Aevtyc Hjduoi Horizontali gręžimo galvutė su 4 velenais X kryptimi Horizontali gręžimo galvutė su 2 velenais Y kryptimi Pjūklas grioveliams D=100 mm (X kryptis) Stabdantis cilindras ruošinio pozicionavimui Ruošinio tvirtinimo sistema Ruošinio ilgis 2500 mm Ruošinio storis 12-60 mm WOODWOP mašinai WOODWOP IMPORT DXF BASIC (1 licencija)

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques En cours de vérification Longueur du chariot à doubles rouleaux : 3000 mm Moteur de 5,5 kW 4 vitesses de rotation : 3000, 4000, 5000 et 6000 tr/min Unité inciseur 0,75 kW Nsdpfxeuciqaj Adueli Guide parallèle avec réglage fin 1200 mm Lame inclinable ⌀ 350 mm (max. 450 mm) Lubrification centralisée automatique pour l’axe de pivotement de la lame Hauteur de coupe : 100 mm (max. 150 mm avec lame de 450 mm) Hauteur de coupe à 45° : 70 mm (max. 106 mm avec lame de 450 mm) Puissance et moteurs Tension : 400 V Raccordement : Triphasé Puissance : 7 kW Moteur : 7,5 CV Encombrement