1 x 100 m³ aliuminio bokštas, ø 3 000 mm

Braby

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system Bdodpfx Ajuiy Hren Heh - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: naudotas, Lasko Hammer KGK 063 Impact force: 630 mkp Bsdpju Eb Niofx An Hsdh Stroke max.: 630 mm Ram weight: 630 kp Upper pressure – filling pressure: 5 bar

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), Thermoforming machine Brand: Multivac Model: R 530 Machine number: 837 Year of manufacture: 1996 Power: 15 kW Voltage: 415 V, 3 Ph, 50 Hz, 35 A Film width: 620 mm Bjdpfx Anewa D A Ao Hjdh Mould: (3x) 180 mm x 160 mm Labeller Brand: MR Etikettiertechnik GmbH Model: MR293 Machine number: 23646/05 Year of manufacture: 2004 Overall dimensions: 8800 mm x 1400 mm x 1960 mm Including vacuum device for stationary film Dimensions: 600 mm x 500 mm x 1060 mm Without the main vacuum pump, vacuum was regulated centrally, the labeller is incomplete.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options Bjdpfx Aeud H Dmsn Hedh TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Oro apdorojimo įrenginys su EC technologija salės klimato reguliavimui ar šildymui, vėsinimo galia kartu su šaldytuvu 150 kW prie 7/12°C, šilumos galia 300 kW, oro kiekis 20 000 m³/h, 4x500 mm oro išleidimo angos, kompaktiška konstrukcija. Bdsdpfx Anofzrgys Hjh

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Various Kreyenborg double piston screen changers - Continuous screen changer - Backflush filter - Immediately available, also with control unit and hydraulic power pack on request. Bsdpfx Ajh Itl Son Hsdh Please specify your desired capacity and material when making an inquiry so that we can offer you the appropriate filter.

Būklė: naudotas, Gamybos metai: 2018, Apžvalga Ši virimo įranga buvo pagaminta 2018 m. Slovėnijos įmonės SKRLJ d.o.o. BH-3 virimo įranga turi 20 hl partijos talpą ir yra sukurta kaip pusiau automatinė sistema su gariniu šildymu. Į komplektą įeina visi svarbiausi proceso indai ir platus priedų asortimentas, todėl sistema tinka vidutinio dydžio alaus darykloms. Įranga šiuo metu yra prieinama. Techniniai duomenys - Gautas misos kiekis: 20 hl už partiją - Karšto vandens talpa: 4 586 l, garinis šildymo apvalkalas - Šalto vandens talpa: 4 400 l, glikolio aušinimo apvalkalas - Šildymas: garu - Valdymas: pusiau automatinis su PLC Komplektacija - Virimo įranga | SKRLJ d.o.o. | BH-3 | 2018 | 20 hl, pusiau automatinė, garu šildoma - Karšto vandens talpa | SKRLJ d.o.o. | - | 2018 | 4 586 l, garinis šildymo apvalkalas - Šalto vandens talpa | SKRLJ d.o.o. | - | 2018 | 4 400 l, glikolio aušinimo apvalkalas - Grūdų rezervuaras | SKRLJ d.o.o. | - | 2018 | 500 kg talpa Bjdpfxjxcng Ie An Hsdh - Dviejų pakopų šilumokaitis | SKRLJ d.o.o. | - | 2018 | nerūdijantis plienas - Priedai: misos aeravimo sistema, išgrūdų šalinimo įtaisas, grūdų hidrahatorius, CIP purškiamieji rutuliai, temperatūros jutikliai, garinio apvalkalo magnetai, 2 sanitarinės išcentrinės pompos, elektroninis srauto matuoklis, rankinis šalto/karšto vandens maišytuvas su termometru, PLC pompos/receptų/temperatūros valdymui

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 5 200 mm, sukimosi skersmuo virš skersinio stumduko: 940 mm, tekėjimo skersmuo: 900 mm, veleno skylė: 204 mm, sukimo momentas: 3 000 Nm, strypo praėjimas: 204 mm, bendras aukštis: 3 600 mm, bendras ilgis: 10 820 mm, bendras plotis: 3 381 mm, tvirtinimo įvorės skylė: 450 mm, veleno nosis: ASA 15, bendras svoris: 39 000 kg,

Gamybos metai: 2026, būklė: naujas, Krovininis konvejeris galinei pakavimo linijai su vertikaliomis formavimo-pildymo-užsandarinimo (VFFS) mašinomis Bdjdpfx Ask N A Susn Hsh Konvejerio juostos plotis – 310 mm Pakrovimo aukštis – 240 mm Kėlimo aukštis – 1000 mm Greitis – 9,5 m/min Su ratukais lengvam pervežimui

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS Bdodouggb Djpfx An Hjh  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.