Įpurškimo liejimo mašina

BOY 90A (102)

Sąlyga: naudotas, Gamybos metai: 1996, mašinos/transporto priemonės numeris: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring-tooth force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring-tooth stroke: 40 mm Counterholder stroke: 40 mm Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min⁻¹ Rapid traverse down: 120 mm/s Rapid traverse up: 135 mm/s Working speed: 5 - 50 mm/s Kwsdpfxjuqdxis Af Iet Total tool weight: 2,400 kg Standard equipment Automation Pay-off tray with straightening machine

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Kwjdpfxefzktze Af Iet The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: naudotas, Refrigeration compressor, chiller, cooling compressor, condensing unit, cooling condensing unit, compressor, motor-driven compressor, cooling machine, refrigeration unit -Manufacturer: Dorin, complete refrigeration compressor and condensing unit -Type: UA - K470CS-01 -Power: 3.48 kW / 1450 rpm -Displacement: 23.37 m³/h -Max. operating pressure: 30.5 bar -Quantity: 2x refrigeration units available -Price: per piece -Dimensions (overall): 1900/1000/H940 mm -Weight: 304 kg/each Kjdsif Hunjpfx Af Iswt

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, CNC vertikalus apdirbimo centras HERMLE C 1200 V Su Heidenhain iTNC 530 takelių valdymu Metai: 2009 Važiavimo eiga: X 1200 Y 900 Z 500 Sukimosi greičio diapazonas: 20 – 10 000 aps./min be laiptelių (HSK 63) Su šia komplektacija: Stacionarus kampinis stalas 1260 mm x 800 mm tvirtinimo paviršius Kwjdex Hhctepfx Af Iet Vertikalus įrankių keitiklis su 30 vietų (HSK 63) Vidinis aušinimo tiekimas 40 bar Nupūtimo įtaisas Grandininis transporterio mechanizmas Sukamasis permatomas langas Aušinimo skysčio sistema Elektroninė šilumos kompensacija iTNC 530 Elektrinis rankinis valdymo modulis HR 410 3D matavimo daviklis Heidenhain Valdymo spintos aušintuvas (RITTAL) Alyvos rūko ištraukimo sistema Įvairūs įrankių laikikliai HSK 63 su įrankiais Veleno alyvos aušintuvas Skiedrų plovimo pistoletas 4 reguliuojamo aukščio mašinos kojos, naudojimo instrukcijos

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Kodpfox Eh Iqox Af Ijwt - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Sąlyga: naudotas, Gamybos metai: 1989, veikimo valandos: 74 900 h, spaudimo jėga: 850 kN, varžto skersmuo: 40 mm, bendras svoris: 3 700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Ksdpsr Hrqrjfx Af Ijwt Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Host computer, handling, air blast, sorting gate, hydraulic core pull 1, mold temperature control 3 zones. The following accessories etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting gate, hydraulic infeed conveyor (height-adjustable in 3 steps, integrated into the control), external disk drive (Arburg original), documentation and machine service reports from Arburg, machine setup course documentation (folder), electrical schematic, documents also available in digital form, oil filling (must be pumped into a container prior to transport—pump is included), electronic water manifold.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Arburg 270 M-350-90 U Kwsdpfsg S I S Asx Af Ist Clamping force: 35 t Year of manufacture: 1997 Screw diameter: 25 mm Tie bar distance: 270 x 270 mm

Sąlyga: geras (naudotas), Gamybos metai: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g Ksdpfxog Emvho Af Ijwt

Sąlyga: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Kwsdpsv Tb U Dsfx Af Iot Year of manufacture: 2013 Machine No.: 191523 Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm