Svyruojančio pjovimo plokščių žirklės

Boschert SX 3020

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), pavaros tipas: hidrostatinis, spalva: geltonas, bendras svoris: 2 000 kg, tuščias svoris: 2 200 kg, darbinė masė: 2 200 kg, padang padangų: 100 procentas, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 2000, Įranga: kabina, papildomi žibintai, GT2000 The GT2000 crawler excavator is a robust and versatile machine with an operating weight of 2,200 kg, ideal for earthmoving, construction, and installation projects. Thanks to its stable build and precise hydraulic system, it delivers high performance both on large construction sites and in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel efficiency, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient working movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation across various soil types. Working Parameters The GT2000 can dig to a maximum depth of 2,050 mm, vertical depth up to 1,955 mm, with a dump height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and rapid work cycles. The minimum turning radius and the tail swing radius both measure 1,125 mm, facilitating maneuverability in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimal ground clearance of 210 mm, providing excellent stability. The blade ground clearance is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Boom and Cabin The swing boom can pivot 75° to the left and 45° to the right, increasing operational versatility. The cabin height is 2,270 mm, giving the operator excellent visibility and comfort during work. Model: GT2000 Operating Weight: 2,200 kg Bedpfx Asqv E S Rjgiscw Engine Type: Yanmar 3TNV80F Rated Power: 15.2 kW Rotation Speed: 10–12 rpm Maximum Bucket Digging Force: 14 kN Maximum Arm Digging Force: 10 kN Hydraulic Pressure: 18 MPa Maximum Gradeability: 35° Travel Drive: Single speed Swing Boom: Yes Expandable Tracks: Yes Joystick: Yes Standard Bucket Capacity: 0.06 m³ Tail Swing Radius: 1,125 mm Minimum Digging Height: 3,365 mm Maximum Dump Height: 2,385 mm Maximum Digging Depth: 2,050 mm Maximum Vertical Digging Depth: 1,955 mm Maximum Digging Reach: 3,860 mm Minimum Turning Radius: 1,125 mm Blade Ground Clearance: 230 mm Blade Maximum Digging Depth: 275 mm Swing Boom Angle Left: 75° Swing Boom Angle Right: 45° Cab Height: 2,270 mm Wheelbase: 1,230 mm Track Gauge: 820 mm Minimum Ground Clearance: 210 mm

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! Bcedpfx Agefg E Hljijw 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Bedpfx Aog Ip Efogijcw Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Bsdpfsd Eqqqjx Agijcw Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Bsdpfx Aefxyhfjgiscw Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 1 gebrauchte Haeger 412 Einpressmaschine für Blech-Befestigungselemente, Bolzen & Muttern, selbstklemmend, zu verkaufen. Mit Werkzeugen und J-förmigem Unterwerkzeug. Bedpfx Agjwbhipsijcw

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Bodpjrz Tutofx Agiocw Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 1 200 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 100 mm, galia: 46 kW (62,54 AG), atstumas tarp centrų: 2 000 mm, darbo valandos: 1 200 h, Galima įsigyti tekinimo staklės DMT CD1100 su Heidenhain valdymu ir tik 1200 darbo valandų. Darbo sritis apima maždaug 1100 mm apsisukimo skersmenį virš staklių lovos ir apie 800 mm virš išilginio slankiklio. Įrankio laikiklis Multifix D1. Tarpcentrė — 2000 mm. Bcjdsxlza Hepfx Agiow Pagrindinis velenas varomas 46 kW galingumo varikliu (60% darbo ciklas) su dviem pavarų lygiais. Veržliaraktis: - Pinolės skersmuo: 125 mm - Priėmimo kūgis: 6 Mk Pristatymas: atsiėmimas iš vietos Mokėjimas: 100 % pavedimu prieš atsiimant, iškart po sąskaitos išrašymo Visi duomenys nėra įpareigojantys, tarpinis pardavimas galimas. Įrenginys parduodamas be garantijos ir lieka mūsų nuosavybe iki visiško apmokėjimo.

Gamybos metai: 2015, Sąlyga: naudotas, Parduodama W ir C profilio gamybos linija Skirta kelio atitvarų, stulpelių ir tvirtinimo elementų gamybai. Pilnai sukomplektuota linija, tinkama nuolatinei pramoninei gamybai. Liniją sudaro: Du dekoileriai Stulpelių gamybos linija Bcsdpfx Agsxhf R Ioisw Parapetų gamybos linija Du presai tvirtinimo detalėms gaminti Techniniai parametrai: Ilgis: 17 m Plotis: 1 m Aukštis: 1 m Variklio galia: 22 kW Svoris: 18 t Gamybos metai: 2015 Gamintojas: Chengxing Machinery (Kinija) Paskirtis ir privalumai: Ši W ir C profilio gamybos linija pritaikyta įvairių kelių saugumo elementų gamybai: atitraukiamųjų kelio atitvarų, atraminių stulpelių bei tvirtinimo detalių. Įranga užtikrina patikimą, stabilų ir nuoseklų gamybos procesą. Įrenginys yra paruoštas apžiūrai. Jei turėsite daugiau klausimų – mielai atsakysime.

Sąlyga: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Bsdpfx Aecdrmmjgiocw Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo