Apvalioji pjūklas lengviems metalams ir aliuminiui

BIMAX TA 91P

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Bledpfx Aouiy Ngji Eep Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive Bsdpfxstycdks Ai Eslp - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement

Būklė: geras (naudotas), Code : 0323 Bodpfx Aistu Hy Eo Eslp Marca : SML - ITALIA Modello : SILVER P 35/EL - Conforme CE Troncatrice elettronica doppia a misura per il taglio di legno, cornici, PVC, alluminio, materie plastiche e vari materiali - Conforme normativa CE Dati tecnici: - Discesa teste oleo-pneumatica - Lunghezza di taglio max mm 5200 - Lunghezza di taglio min mm 50 - Altezza di taglio mm 100 - Larghezza di taglio max mm 170 - Diametro lama mm 350 F30 - Motore Hp 3 ciascuno - Giri/min 3000 - Programmatore elettronico del posizionamento teste - Comando bimanuale per discesa lama - Pressioni pneumatiche per bloccaggio pezzo - N° 2 bocche aspirazione diametro mm 60 - Pressione di esercizio 7 bar - Dimensioni totali mm 6300 x 1000 x 1600 h - Peso kg 1100

Būklė: naudotas, Vieno stovo ekscentrinė štampavimo presas WEINGARTEN tipas EV 63 Mašinos Nr. 738 / 61 Pagaminimo metai: 1962 Presavimo jėga: 63 t Iškyša: 260 mm Stalo matmenys: 630 x 530 mm Stalo anga: Ø 210 mm Presavimo galvutės matmenys: 315 x 260 mm Bjdpfxsk S Htxe Ai Eelp Presavimo eiga reguliuojama: 8-100 mm Presavimo galvutės reguliavimas: 63 mm Tvirtinimo kaiščio skylė: Ø 40 mm, su fiksavimo elementu Montavimo aukštis maks.: 450 mm Smūgių dažnis: 115 smūgių/min. Suslėgto oro poreikis: min. 4,5 bar Variklio galia: 4 kW Maitinimas: 380 V, 50 Hz Stalo aukštis nuo grindų: apie 750–900 mm - Elektrinis eigos paleidimas per pakojų jungiklį arba dviejų rankų valdymą - Apkrovos apsauga per lūžtančią plokštę - Sankabos-stabdžio kombinacija su WEINGARTEN frikcine sriegine sankaba ir TDP viršutinės padėties sauga - Priekinis alkūninio veleno atraminis guolis - Presavimo stalas reguliuojamas aukščiu su 2 sriegio velenais - Rankinis centrinis tepimas - Elektros skydas šalia - UVV rankiniam įdėjimui Užimamas plotas (I x P x A): 1750 x 1600 x 2430 mm Svoris: 4,5 t Gera būklė

Būklė: naudotas, Pressure: 55 t Throat depth: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Ram adjustment: 55 mm Ram area: 290 x 210 mm Ram bore: 40 H7 mm Pass-through opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Bodpfx Aecp Apyoi Ejlp Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication system - Balluff cam switchgear - Height-adjustable table - Mechanical ram overload protection (shear plate) - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Bodpfxob U Hwno Ai Eolp Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Bedefgpdljpfx Ai Eelp Working height: 925 mm Saw blade speeds: 15/30/45/90 rpm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.38 t Space requirements: approx. 0.8 x 1.0 x 1.85 m Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, pjūklo disko skersmuo: 550 500 mm, The machine is in perfect technical condition and has seen very little use. Designed for processing aluminium and PVC profiles. Mitre cuts are possible in 3 planes, and it can be used as a notching saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical blade is possible. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre cuts. Suitable for processing profiles up to 300 mm, with width at 90° up to 90 mm, and mitre angles up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical blade swing range: 30°–90°–30° (front/centre/rear), adjusted manually and positioned using a digital display. Vertical blade swing range also 30°–90°–30°, manual, with positioning via digital display. Material stop (table top) can be manually rotated left and right within 30°–90°–30° and positioned using a measurement scale. Material depth stop is manually adjustable via sliding carriage and hand clamp, positioning via digital display. Bedpjvtarnjfx Ai Ejlp

Būklė: reikia remonto (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade diameter: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 – 1885 m/min (non-ferrous metals) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metals) Round material working range: 5 - 70 mm (steel) Round material working range: 5 - 50 mm (non-ferrous metals) Feed length: 5 - 500 mm 5-9999 mm (multiple stroke) Max. feed rate: 500 mm/sec Weight (saw) approx.: 610 kg Dimensions LxWxH (saw) approx.: 2500 mm x 1000 mm x 2000 mm The machine will be completely overhauled in our facility according to customer requirements. Among others, the following components will be renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - Replacement of pneumatic feed and ball screw - Replacement of servomotor and servo drive - Replacement of frequency converter for main saw drive - New electronic components - New pneumatic lines - Servicing/replacement of all pneumatic cylinders and valve terminals - Optimization of extraction system - Servicing of central and minimal lubrication systems - Replacement of general wear parts - Overhaul of machine bed The machine is additionally equipped with: - Minimal lubrication for superior cutting quality Thanks to its features and design, the machine is suitable for high-volume cutting of steel within close tolerances. Bledpfx Aiouiy I Ae Ejp Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Conversion of the sawing unit to a direct-drive main drive for processing non-ferrous metals and plastics (speed: 1000 – 3000 rpm) - 1000 mm feed unit - 2000 mm feed unit - 4 m inclined magazine - 6 m inclined magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for high-volume clamping of round materials - Discharge system - Delivery and installation at your facility - Training for your staff

Gamybos metai: 2023, būklė: paruoštas naudoti (naudotas), An aluminium mitre saw by Eisele, including a mobile extraction unit from AS Sägetechnik, is available. 1) Pressta Eisele GS 600 mitre saw, year of manufacture: 2023, saw blade diameter: 600 mm, indexing positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200 mm, working height: 970 mm, extraction connection diameter: 100 mm, weight: approx. 650 kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, extraction connection diameter: 100 mm, air flow rate: 1,400 m³/h, machine dimensions (L/W/H): approx. 750 mm/800 mm/1,800 mm, weight: approx. 100 kg. Documentation available. Inspection on site is possible. Bodpjw D Et Rjfx Ai Eolp