Šaltas diskinis pjūklas

MEP TIGER 352

Sąlyga: naujas, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 x 95 mm Cutting capacity at 90 degrees (flat): 180 x 95 mm Cutting capacity at 45 degrees (round): 110 mm Cutting capacity at 45 degrees (square): 95 x 95 mm Cutting capacity at 45 degrees (flat): 125 x 95 mm Cutting capacity at 60 degrees (round): 90.0 mm Cutting capacity at 60 degrees (square): 90 x 90 mm Cutting capacity at 60 degrees (flat): 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight: approx. 375 kg Dimensions (L x W x H): 1000 x 1100 x 1870 mm Equipment / Description: Duedpfx Aoxaab Sjb Sjl - Manual high-performance vertical circular saw - For cuts from 45° right to 60° left - The saw head runs on pre-tensioned linear guides mounted on a robust cast steel column - The powerful 2-speed gearbox is specially designed for cutting solid material - A total of four blade speeds are available for optimal adjustment to the material - Large bearing-mounted rotary table with internal clamping and precision stops at 0/45/60°, ensuring quick adjustment for miter cuts - Quick-action vice with bolt-on serrated jaws for secure workpiece clamping - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop, 600 mm - Comprehensive operating and maintenance manuals - Circuit diagrams and exploded views - Crane lugs for transportation * Machine is supplied without saw blade.

Sąlyga: naudotas, Gamybos metai: 2022, Sheet width: 1550 mm Sheet thickness: 4 mm Bending steps: 6 Total power requirement: 2.2 kVA Approx. machine weight: 1.42 t Approx. space requirement: 2.7 x 0.75 x 1 m Rolling feed: 3.5 m/min Motorized plate bending machine Working width: 1550 mm Material thickness up to 4 mm Roller diameter: 140 mm Rolling speed: 3.5 m/min Heavy-duty steel welded construction Driven top and clamping rolls Swiveling upper roll Manual adjustment of clamping and side rolls Roll drive via powerful electric motor and gearbox Wire grooves on the clamping roll Safety device: emergency stop cable With mobile control panel and foot pedal Dusdpet Hmlqjfx Ab Ssl Equipment details: Swiveling upper roll Control panel with digital display and manual operation (option) RBM 2050-30 E PRO optionally with motorized side roll adjustment and digital display for side roll Maximum bending capacity, steel 400 N/mm²: 4.0 mm Maximum conical bending capacity, steel 400 N/mm²: 2.0 mm Maximum bending capacity, stainless steel: 3.0 mm Maximum conical bending capacity, stainless steel: 1.5 mm Maximum bending capacity, aluminum: 4.8 mm Maximum conical bending capacity, aluminum: 2.4 mm Minimum bending diameter: 210 mm Rolling speed: 3.5 m/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, PUSIAUTOMATINIS DISKINIS PJOVIMAS MEP TIGER 352 SX EVO - Disko sukimas 4 greičiais (15/30/45/90 aps./min.) - Sukamasis stalas montuotas ant centrinio kaiščio ir ašinio guolio - Pjovimo galvos padavimas dviguba linijine kreiptimi - Mechaniniai ribotuvai ties -45°, 0°, +45° ir +60° su fiksavimo įrenginiu bet kurioje padėtyje Dodpjxdr Rtefx Ab Ssul - Naudotojo sąsaja su ekranu

Sąlyga: naujas, Saw blade diameter 350 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 95 mm Cutting capacity at 90 degrees: rectangle 180 x 95 mm Working height 925 mm Saw blade speeds 15/30/45/90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic - semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with head gliding vertically on linear guides with ball bearing slide rails at the front. - Double gearbox drive for high transmission power - 4 cutting speeds: 15/30/45/90 rpm - Vice opening 190 mm - Stroke movement of the saw head programmable directly from the control panel, allowing adjustment to the material being cut - Pneumatic vertical vice - Saw blade HSS DMO 5 ø 350x32x2.5 for solid and profile material Dsdpsfg Rlbjfx Ab Ssul - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Swarf removal brush - Length stop for repeat cuts - Material support arm, with connection option for roller conveyor/loading side - Rotary table with additional central axis

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, konteinerio ilgis: 20 pėda,

Sąlyga: naujas, MEP TIGER 352 NC 5.0 [Fully Automatic] Article Number: TI352NC Motor Power: 3.0 kW Vice Opening: 190 mm Blade Dimensions: 350x32x2.5 mm Weight: 680 kg Blade Speed: 15 - 90 m/min. Cutting Capacity 0°: 115 / 95 / 180x95 mm Cutting Capacity 45° Right: 110 / 95 / 125x95 mm Cutting Capacity 45° Left: Cutting Capacity 60° Right: Cutting Capacity 60° Left: Description Electropneumatic, vertical, linear-guided automatic saw for the use of HSS saw blades, suitable for series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by MEP’s latest-generation CNC system, enabling programming of up to 1,000 different cutting programs—each with different lengths and quantities—for the same material thickness. FEATURES: - New centralized control console on an articulated arm for easy emergency stop access from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial connection. - Display with 20 characters x 4 lines showing technical parameters: + Blade speed + Number of programmed and completed cuts + Blade thickness + Feed length + Cutting time + Ammeter + Indication of over 100 diagnostic and warning messages. - NEW: Display and logging of alarm and fault messages with incident review capability. - NEW: 600 mm material feed with stepper motor and ball screw mounted on opposing bearings. Dsdpfxjchhhde Ab Ssul - NEW: Electronic inverter for continuous regulation of blade speed from 15 – 90 rpm (optional 30 to 150 rpm). - NEW: Low-voltage control panel: Polyurethane membrane keypad with thermoformed, raised buttons and actuation confirmation signal. - Double gear set for high cutting performance. - Saw head glides on dual linear guideways with recirculating ball bearings. - Coaxial cylinder with bypass valve for rapid approach and potentiometric linear transducer for head position detection. - Programmable saw arm stroke from the control panel for adaptation to material size. - Adaptive cutting pressure control. - Rotating table with central pin and axial bearing for precise miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. - Chip removal brush. - Signal lamp for program end or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm, suitable for solid and profile material. - Prepared for installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication system. For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, Saw blade diameter 350 x 32 mm Cutting capacity at 90° (round): approx. 115 mm Cutting capacity at 45° (round): approx. 110 mm Dusdpfx Abjxabd Is Sel Cutting capacity at 60° (round): approx. 90.0 mm Cutting capacity at 90° (square): 95 x 95 mm Cutting capacity at 45° (square): 95 x 95 mm Cutting capacity at 60° (square): 90 x 90 mm Cutting capacity at 90° (flat): 180 x 95 mm Cutting capacity at 45° (flat): 125 x 95 mm Cutting capacity at 60° (flat): 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Features / Description: - NC electro-pneumatic semi-automatic machine (INDUSTRIAL) * for mitre cuts from 45° right to 60° left - MEP NC control with soft-touch keypad * with backlit display - The saw head is guided on preloaded linear rails . on a robust cast steel column - The powerful 2-speed gearbox is specially designed for solid material cutting - Four blade speeds available for optimal adaptation to material - Large precision rotary table with internal table clamping & precision stops at 0/45/60° for quick adjustment to mitre cuts - Pneumatic vice * equipped with bolted vice jaws * knurled jaws provide secure workpiece hold - Base frame with lockable door, chip drawer and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded drawings - Lifting lugs for transport * Machine is supplied without saw blade

Sąlyga: naujas, Saw blade diameter: 370 mm Cutting capacity at 90 degrees, round: 120 mm Cutting capacity at 90 degrees, square: 110 mm Cutting capacity at 90 degrees, rectangular: 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight approx.: 0.615 t Space requirement approx.: 1.4 x 1.4 x 2.0 m Electropneumatic - Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: Djdofg Rldopfx Ab Soul - Saw head glides on recirculating ball linear double guides - Three-stage gearbox - Infinitely variable speed 15–150 rpm - Vice opening: 190 mm - Saw head stroke programmable directly from the control panel for adaptation to the material being cut - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile materials - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for repeat cuts of equal length - Material support arm, also provides connection option for roller conveyor/loading side

Sąlyga: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Duedpofg Rlcjfx Ab Sjl Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Djdpfx Ajiu Acpob Sjul