Juostiniai pjūklai

BIANCO 280S band saw for metal

Sąlyga: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 – 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy - Mitre cuts left 60° and right 45° - Material height sensor (automatic cut start detection) - One-piece cast frame and gearbox; exceptionally quiet and low-vibration cutting Ksdpfefgyh Ujx Af Ijdw - Hydraulic vice, laterally adjustable - Guided, high-quality industrial bearings - Robust vice and machine casting - Large machine bed - Machine base with tool compartment and chip drawer - Cut monitoring via ammeter - Feed pressure regulator - Support roller (material infeed side) - Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material edge, or for series cutting, cut immediately 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting diameter: 355 mm Saw band dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Connection voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre Bandsaw Semi-Automatic - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release clamp - Band tension control via pressure gauge - Electric coolant system Kdedpfx Afemhm Aqs Iew

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 6 951 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 700 mm, laisvas kėlimas: 1 450 mm, kuro tipas: dujos, stiebo tipas: triplex, statybinis aukštis: 2 120 mm, šakių ilgis: 1 100 mm, tuščias svoris: 3 480 kg, pavaros tipas: Treibgas, LPG forklift Mast type: Triplex Technical condition: average Kedeukra Uepfx Af Ijdw Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 40 - 60% Description: The unit will be partially repainted if required, and undergoes workshop and UVV (accident prevention regulation) inspection. Prices for these services available upon request. Sideshift, fork positioner, Sideshift and fork positioner by Meyer. 3rd valve, 4th valve, rear work light, overhead guard, full free lift, Safety Pilot,

Sąlyga: naujas, Saw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90° --- 270 mm / 260 x 320 mm Cutting capacity 60° --- 140 mm / 140 x 140 mm Cutting capacity 45° --- 230 mm / 220 x 220 mm Cutting capacity -45° --- 200 mm / 220 x 150 mm INCLUDES Saw blade Ksdpfxsga Tzue Af Iedw Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic cut-off

Sąlyga: naujas, Gamybos metai: 2025, Horizontal band saw with swiveling arm for cutting metals, allows cutting in a plane perpendicular to the axis of the material being cut and at any angle from 0 to 60º. Material can be fed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings. This significantly impacts blade guidance, its durability, cutting straightness, accuracy, and quality. The machine arm is made of cast iron profile. The control panel is located next to the arm. Power from the electric motor to the drive wheel of the saw blade is transmitted by a worm gear motor. The saw blade is tensioned over two cast iron wheels by a manual tensioner and guided by an adjustable rolling and linear carbide guide set. Inside, there is a separate coolant tank with electro-pump. The arm lowering speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is controlled from the control panel. Two cutting blade speeds are available: 36 and 72 m/min. In the rest position (after cutting), the blade drive is automatically disengaged. Safety is ensured by blade guards and microswitches that stop the motor upon completion of the cutting cycle or opening any guard; an additional protection is automatic saw switch-off in the event of a broken blade. Technical data: Band saw dimensions: 2455×27×0.9 mm Blade tension: mechanical (manual) Blade speed: 36, 72 m/min Kdjdpfxjvuf S Nj Af Iew Feed speed: 0–50 m/min (stepless feed) Arm lowering control: stepless – hydraulic cylinder Vice base height: 900 mm Power supply: 3-phase 400 V Motor power: 1.1 kW Weight: 216 kg Warranty: 12 months Manual operation: yes CE declaration: yes Cutting capacity (angle – round/square/rectangular): 0º: ø230 / 225×225 / 260×150 mm 45º: ø165 / 165×165 / 180×130 mm 60º: ø105 / 110×110 / 100×90 mm *Please note: the machine is sold by default without a CEE connector, as there are several types available. If you would like to receive one with your machine, please contact the seller before purchase or when placing your order.

Sąlyga: naudotas, Gamybos metai: 2005, Cutting diameter: 178 mm Saw band length: 2,265 mm Cutting width: 225 mm Kdjdpfx Aferzwwre Iow Saw band dimensions: 2,265 x 20 x 0.9 mm Band speed: 30 / 60 m/min Cutting range at 90 degrees (round): 178 mm Cutting range at 90 degrees (flat): 225 x 110 mm Cutting range at 45 degrees (round): 140 mm Cutting range at 60 degrees (round): 85 mm Total connected load: 0.75 kW Machine weight: approx. 165 kg Space requirements: approx. 1,100 x 700 x 1,650 mm Equipment: - Coolant system - Bandsaw blades

Sąlyga: beveik kaip naujas (naudotas), Capacity at 90°: 260° Cutting capacity flat at 90°: 300 x 200 mm Capacity left 45°: 175° Capacity right 45°: 200° Max. saw speed: 35 + 70 Saw blade dimensions: 2880 x 27 x 0.9 mm Power: 1.4 kW Length: 1900 mm Width: 1800 mm Kjdpfjwvkatjx Af Iedw Height: 2000 mm

Sąlyga: geras (naudotas), Gamybos metai: 1996, KNUTH HBE 280 Metal Cutting Bandsaw – Machine in stock – Made in Germany – Year of manufacture: 1996 TECHNICAL SPECIFICATIONS: – Motor power: 1.2 kW – Blade speed: 21 / 28 / 42 / 62 / 84 m/min – Dual blade guides – Adjustable cutting angle – Cutting capacity at 0° (round): 280 mm – Cutting capacity at 45° (round): 240 mm – Stepless cutting speed: 20–100 m/min – Blade cooling system – Infinitely variable hydraulic feed ensures optimal cutting results and minimizes tool wear Machine dimensions: – Length: 200 cm – Width: 100 cm – Height: 130 cm – Weight: approx. 500 kg Kdodpfxehcit Ie Af Iew

Sąlyga: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for managing all functions * Swivel-mounted on the front right - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of saw frame descent - Saw blade guides made from carbide plates - Hydraulic saw blade tensioning – incl. digital value display - 2-speed saw blade operation - 1x Bi-metal saw blade - 1x Mitre stop - Chip cleaning brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame Kdjdpfx Afsxaa S Rj Iow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Sąlyga: naujas, Technines specifikacijas rasite PDF faile. Kdjdpfxexp Hyge Af Iow