Klijavimo presas

BECK 4200 x 500 x 70

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vertical double-sided wood press by C.O.P.E. Two working areas, each measuring 620x110 cm. Iedpeudy A Nofx Alreic

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Obliavimo staklės HA 4 Obliavimo plotis 450 mm Stalo ilgis iš viso 2500 mm Įvado stalas 1500 mm Staklių aukštis 820 mm Maks. drožlės storis 15 mm Peilio veleno apsisukimai 4800 aps./min Variklio galia 4 AG Svoris 660 kg Iodpfxjinkfno Alrjic Trijų peilių velenas Transportas galimas už papildomą mokestį! Dėl naudotos įrangos amžiaus pardavimas verslo klientams vykdomas be garantijos.

Būklė: naudotas, Gamybos metai: 1989, Naudota mašina Iisdpfjw I U E Aex Alrjc Pagaminimo metai: 1989 Būklė: Patikrintas funkcionalumas Įranga ir techniniai duomenys: Maks. briaunos storis: 20 mm Maks. briaunos aukštis: 51 mm Maks. ritininės medžiagos storis: 3 mm Mažiausias ruošinio ilgis: 140 mm Mažiausias ruošinio plotis: 60 mm Klijų sistema: 1906 kasetė Spaudimo įrenginys Frezuotojo mazgas 1920 - briaunų ir nuožulnių frezavimas iki 20 mm Užimamas plotas (I x P x A): 3150x1800x1375 mm Svoris apie: 800 kg Vieta: Flörsheim Prieinamumas: Trumpas terminas

Būklė: naujas, Load capacity 500 kg Number of suction pads 6 Diameter of suction pads 215 mm Vacuum Lifter VH 6-500 for horizontal transport of smooth, dry, and airtight panels. Robust load-bearing construction made of steel, painted in RAL 2000 with low dead weight. Comprising: - 1x Galvanized longitudinal beam with a length of 2,400 mm - 3x Galvanized cross beams with a length of 1,000 mm each - 6x Spring-loaded, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the seal can be replaced separately from the metal carrier, cost-effectively and without tools - 6x Ball valves to shut off individual suction cups, allowing for the lifting of smaller panels without having to move cups or beams - 1x Spiral connection cable, small coil: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling * routed alongside the load chain to the lifting device Isdpfxoq Sc Aus Alreic - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control panel (necessary if the vacuum lifter is powered via the crane’s trolley and there is no neutral conductor) - Operating handle extendable to 1,000 mm from the center of the beam. Stable metal pocket for your crane control unit included at no extra charge. - Operation "Suction / Release" via manual slide valve: The wear-free and very robust manual slide valve ensures safe suction and release upon activation of the release button. (Double release according to EN 13155) - Control and safety devices for the vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning system with acoustic signal annunciator * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Double-action release for unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easy-to-understand documentation Warranty against material and manufacturing defects for one year in single-shift operation (excluding wear parts). Initial inspection UVV 18, VBG 9a with CE certificate of conformity according to EN 13155 - Packaging suitable for truck transport.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright. Isdpfx Ajqt Dmyjlroic

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 020 mm, statybinis aukštis: 410 mm, kėlimo aukštis: 600 mm, tuščias svoris: 150 kg, keliamoji galia: 350 kg, bendras ilgis: 1 900 mm, bendras plotis: 740 mm, garantijos trukmė: 24 mėnesiai, NIVEAU – Lift Table HS 350 Large without worktop Description: Iedpoh A Hxijfx Alreic > Mobile scissor lift table with double horizontal scissors, basic version without worktop; equipped with a base frame for the installation of various worktops; 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operation via foot pump Load capacity (kg): 350 Weight (kg): 150 Effective lift (mm): 610 Closed height (mm): 400 Max. height (mm): 1010 Platform size (mm): 1900 x 740

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Iisdjfi Tg Hjpfx Alrjc Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, 1 Blokinė vilktis 2 Rankinio padavimo įrenginys 3 Greito tvirtinimo vagonėlis Linck FWK Vėžės plotis: 900 mm Važiavimo greitis: į priekį/atgal: 80/180 m/min Žnyplių atidarymas: 750 mm Medienos ilgis: 2,5–13,5 m 4 Pjovimo agregatas Linck KCSU-6 Apvali mediena – skersmuo: 120–650 mm Pavaros galia kiekvienai pusei: 160 kW Maksimali pjovimo aukštis: 3 ašys: 405 mm Likutis: 370 mm Medienos ilgis: 2,5–13,5 m Maksimalus pravažiavimo plotis: 750 mm Min/maks pjovimo plotis: 18–720 mm Pleistinio skeltuvo atidarymas: 560 mm Pjūklo disko skersmuo: 620 mm Apribojimo frezos atstumas: 370 mm Grynasis svoris apie: 15 000 kg Iodpfoxtwwkox Alreic Nuolatinis greičio reguliavimas: 10–35 m/min 3 Iškrovimo įrenginys Bm 1/Mbh 4 Šoninės medžiagos trumpinimo pjūklas Linck KA 1/ACF 5 Pilna hidraulinė sistema 6 Pilna elektros valdymo sistema 7 Pilna cirkuliacinė transportavimo technika 8 Išleidimo mechanizacija 9 Atliekų pašalinimas po KCSU Pagaminimo metai: 1998. Paleista 2000 m. Įvairūs įrankiai Pardavimas pagal kliento užsakymą.

Būklė: naujas, Glazing Bead Nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner joints are closed - No open glazing bead gaps - No color discrepancies during paint finishing - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Staple Corner Joining Machine for stapling glazing bead frames. Option to select between automatic and manual operation; With angle stop, clamping device from above and in front. Pressure can be regulated separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table. Operation via foot pedal. ----- Price for this configuration upon request! Plus statutory VAT and packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with the optional mobile work table (see details under surcharge options). Surcharges: ----- Mobile work table Height-adjustable from 700 to 1,000 mm, 2 plug-in support rails, 1,000 mm long, 2 swiveling and sliding support rails, 1,000 mm, all rails covered with felt, 4 swivel castors, 2 of which with brake. ----- Surcharge: €1,311.00 net Staples: packages 15 mm staples (pack of 2,000 pcs): Price €22.00 12 mm staples (pack of 3,000 pcs): Price €32.00 10 mm staples (pack of 3,000 pcs): Price €32.00 Dimensions and weights ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping. Iiodpevnh T Nefx Alrjc (Technical data as per manufacturer's information - subject to change!)

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Iisdpfxsu Agh Sj Alrjc Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location