Įpurškimo liejimo mašina

BATTENFELD HM300/1300

Sąlyga: paruoštas naudoti (naudotas), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, featuring a reinforced steel/welded construction and documentation. Inspection possible. Year of manufacture unknown, completely overhauled in 2022. Hnjdpsn Tpmujfx Af Isg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 170 h, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, įpurškimo slėgis: 2 005 juosta, injekcijos svoris: 618 g, formos aukštis (min.): 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article Number: 225 Availability: In stock Year of Manufacture: 2016 Brand: KRAUSS MAFFEI Technical Data Injection Weight: 618 g Injection Rate: 848 cm³/s Clamping Force: 2,500 kN Screw Diameter: 60 mm Injection Pressure: 2,005 bar Tie Bar Distance: 630x630 mm Platen Size: 1135x1180 mm Minimum Mold Height: 330 mm Maximum Platen Opening: 1,150 mm Control System: MC6 Hnsdpfx Afovtzkfj Ijg Language: German Power: 70 kW Operating Hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core Pull: Yes Euromap Interface: Yes Air Valve: Yes Heated Channels: Yes Gas Accumulator: Yes

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12677, Rotor diameter: 400 mm Rotor width: 600 mm Hnsdpfxjk Tuxde Af Isg 3-knife rotor 2 rows of stator knives Infeed opening approx. 600 x 660 mm Drive motor: 30 kW

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Technical Details Clamping force: 1000 kN Mould platen size (h x v): 680 mm x 594 mm Tie bar spacing: 470 mm x 420 mm Mould opening stroke: 500 mm Minimum mould height: 250 mm Maximum daylight: 750 mm Hydraulic ejector – stroke: 150 mm Ejector force forward/backward: 41.2 kN Injection Unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Shot volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Hnedpfx Afsk Rnvme Ijg Screw speed: 0 - 318 rpm Max. plasticizing rate: 30.4 g/sec Nozzle contact force: 86 kN Electrical and Hydraulic Equipment Installed heating power: 12.1 kW Heater zones (barrel): 1+3 Pump power: 18.5 kW Oil volume: 275 litres Dimensions and Weights Total machine weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 Hnjdpfx Asud H Dmof Isg INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, spaudimo jėga: 1 300 kN, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Tie bar spacing (vertical): 520 mm Tie bar spacing (horizontal): 520 mm Min/Max mould height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Type: Horizontal Drive: Hydraulic + Apex sprue picker robot Hnsdpfewv Hrxsx Af Iog Core pulls: Yes

Sąlyga: naudotas, Gamybos metai: 2017, spaudimo jėga: 250 kN, darbinio tūrio: 570 cm³, įpurškimo slėgis: 2 470 juosta, bendras svoris: 14 500 kg, darbo valandos: 22 900 h, sraigtinio konvejerio skersmuo: 55 mm, Pristatymo sąlygos: FCA Pegnitz Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis Hedpfx Afexv D Tks Isng

Sąlyga: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a color touchscreen. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Hsdsxdd Spepfx Af Iong Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie-bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection Unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection flow rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time (Euromap 6): 2.7 s Oil tank capacity: 720 dm³ Linear Robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X-axis (from mould): 900 mm, servo motor Y-axis (vertical, with motor brake): 750/750 mm, telescopic, servo motor Z-axis (cross): — Dimensions and Weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 1000 kN, tie bar spacing: 470 mm/420 mm, platen dimensions X/Y/Z: 680 mm/590 mm, opening stroke: 500 mm, clear width: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, shot weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm/1500 mm/2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Hnjdpfew Duvbjx Af Ieg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1984, veikimo valandos: 30 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 954594M02, bendras plotis: 80 mm, bendras ilgis: 2 000 mm, bendras aukštis: 1 500 mm, bendras svoris: 40 kg, Įranga: aušinimo blokas, Parduodu dvigubo sraigto ekstruderį (laboratorinį) su 2 lyginimo volais, eksploatacijos vadovu, lūpa 10 cm pločio juostoms, vandens vonia ir kt. Hnjdpsxpgyyefx Af Ieg