Platus juostinis šlifuoklis

BÜTFERING SWT335/ QXU

Sąlyga: naudotas, rida: 7 000 km, galia: 48 kW (65,26 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, pirmoji registracija: 12/1999, spalva: oranžinė, Įranga: visų varančiųjų ratų pavara, Multicar winter service MULTICAR SELF-PROPELLED WORK MACHINE, STREET CLEANER Gjdpovhzd Ujfx Abmekf The vehicle does not have a roadworthy certificate (TÜV) due to use on private property We have not tested the vehicle for full functionality Engine and transmission run well

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Gkjdpfx Aot Hagnebmef Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, We offer for sale: WEEKE (Homag Drilling Systems) – OPTIMAT BHC 200 – High-Precision CNC Machining Center Technical specifications: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • Dust-protected linear guide system • Rack-and-pinion drive on the X-axis and ball screw drive on the Y and Z axes • Axis travel: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm Gkodpfewx Iidsx Abmjf • Worktable dimensions: - X = 5250 mm (length) - Y = 1250 mm (width) - Z = 100 mm (thickness) Optimat BHC200 • Control: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Suitable for machining wood, plastics, and light metals • Condition: good; very well maintained, serviced regularly / last maintenance 03/25 • 10/2022 – Machine upgrades: - New industrial PC (Siemens) - woodWOP 8 / Windows 10 upgrade Advantages of the HOMAG BHC200: • Precise and efficient machining for a wide variety of materials • Ideal for joineries, furniture manufacturers, and special fabrications • Reliable performance, even for demanding projects Scope of delivery: • Machine + industrial PC • Operating manual • CE SAFETY AND PROTECTION EQUIPMENT - Safety fence on the side and rear - Three-part safety tread mat at front allows workpieces to be loaded in the non-active working area. Inspection and test run on site possible by arrangement! Dismantling and transport to be organized by the buyer.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Working surface: nesting table Main spindle power: 9 kW Godpfxsu N Skfe Abmokf Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool positions: 8

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS Gkodpfsk Scufox Abmsf 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR

Sąlyga: naujas, Gamybos metai: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors Standard selectable inlet port at the top or bottom Uniform filter bags for all variants Discharge into chip bins The modular models of the AL-KO AAS series are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air-side fan, thereby creating particularly effective positive-pressure filtration. Durable quality components and a complete metal housing made of galvanized sheet steel offer you investment security, as do the wide range of retrofit options. The exceptionally attractive price and short installation times also contribute to making the AL-KO AAS the right choice with certainty. Technical Data AL-KO AAS 3013 Inlet port: 200 mm Nominal capacity: 2,500 m³/h Gkodpfsfc A Urox Abmef Maximum airflow: 3,300 m³/h Maximum pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (L x W x H): 2,486 x 578 x 2,115 mm Weight: 139 kg

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking Gkjdpfsrmucxjx Abmjf - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Features and Technical Data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry version moving bridge - Helical rack-and-pinion drive on X and Y axes, Ballscrew drive on Z axis for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height DYNESTIC table: Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Solid, full-length processing table with grid - Continuous grooves in X and Y direction - Groove spacing 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Motor power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-configuration - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from flange (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - n(max): 1000–4400 rpm, stepless adjustment - Mounting: M 10 thread – fitting 11 mm - Without tool or holder - 6 horizontal spindles: - 2 double drill spindles on X axis - 1 double drill spindle on Y axis - Mounting: M 10 thread, fitting 11 mm - Max. drill length: 63 mm from flange - Without tool or holder Gkedpfxewkbbde Abmef - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000–24000 rpm, stepless adjustment - Max. power between 12,000 and 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - Right-hand rising thread nut (for clockwise tools) - Collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (incl. holder) - Tools: milling and grinding tools up to Ø 160 mm - Safety enclosure per CE standard - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote for machine control with the following functions: - Start/Stop of machining program - Speed control for machining cycles - Reset button - Manual and rapid feed for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each carriage - Simultaneous lubrication: - for all linear guides

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali Gkedsmgc I Nepfx Abmef - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: geras (naudotas), Approx. 30 linear meters of shelving system – Schaefer R3000 Manufacturer: Schaefer R3000 Condition: As new, see photos. Over 300 meters available Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg shelf load capacity, bay width approx. 100 cm Asking price: €2,890.00 net ex-warehouse The offer includes: - 31 uprights/frames, 2.5 m, galvanized - 90 shelves, 100 kg shelf load capacity each, galvanized - 10 diagonal cross-braces for stabilization - 3 levels per bay (additional levels available for an extra charge) Other configurations available upon request. Gkodpfx Abscfhx Temef Heights available: 2.3 m, 2.5 m, or 3 m. Items are in stock. Constantly over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly upon request. More information available upon request. (Specifications, details, and prices subject to change and prior sale. Please see our GTC; all prices exclude VAT, ex warehouse.) Purchase / Sale: We are always interested in buying and selling a wide range of items from various sectors. To access our website, please click on our logo! - Broom-clean factory clearances - Liquidation of companies - Fast, flexible, efficient! We also clear and/or dispose for insolvency administrators. Send us a brief message and we will get back to you promptly.