Apdirbimo centras su dėliojamuoju stalu

WEEKE VANTAGE 200

Sąlyga: beveik kaip naujas (naudotas), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, stepless feed, 12–120 m/min. • Feed motor: 22.0 kW • 1st spindle below: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle below: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle below: 11.0 kW • All spindle motors with electronic brake • COMPLETELY NEW CUTTERHEAD SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 powered feed rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences Nwedjtynpxspfx Aghep • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Central lubrication points • NEW standalone control panel, 5 m cable • NEW standalone control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram included + Many NEW spare parts/accessories Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power connection: • Total connected load: approx. 157 kW Condition: Machine as shown in photos – technically as-new Payment: Payable in full by bank transfer prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Offers & inquiries only with complete company details Errors and prior sale excepted

Sąlyga: naujas, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile material, with max. 60 mm remnant length. - Maximum cutting section: 230 x 230 mm. - Numerically controlled bandsaw with a new Windows “CE” based system specifically developed by MEP for automatic machines. FEATURES: - User interface with 7" touch screen display and mechanical keys for the machine operating functions, guaranteeing reliable operation, easy and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure compliant with the latest safety regulations of Machinery Directive EN 13898/2007. Nwjdpfsfg E Hyox Aghsp - New fieldbus communication system equipped with dual microprocessor and serial connection. - Sturdy cast iron structure (G25) to minimize vibrations, enhance machine stability, and reduce wear on the saw blade.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008112, Darbinė zona X ašis: 3390 mm Nsdpfx Agew Idgvohjwp Darbinė zona Y ašis: 1535 mm Darbinis paviršius: su vakuuminiais konsolės laikikliais Pagrindinio veleno galia: 15 kW Valdomų ašių skaičius: 5 ašys Gręžimo velenų skaičius: 21 Įrankių vietų skaičius: 14

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Panelinė pjovimo staklė Selco WNT 630 3800x2200 TECHNINIAI DUOMENYS: Maksimalus pjovimo ilgis: 3800 mm, Maksimalus pjūklo disko išsikišimas: 108 mm, Nwsdpfev T Sdijx Aghop Maksimalus griebtuvo atidarymas: 100 mm, Minimalūs plokštės matmenys ant pakeliamo stalo: 1830 x 915 mm, Maksimalūs plokštės matmenys ant pakeliamo stalo: 3660 x 2200 mm, Maksimalus rietuvės aukštis: 630 mm, Minimali užkrovimo storis ant pakeliamo stalo: 10 mm, Darbinio stalo aukštis: 985 mm, Stalo keliamoji galia: 5 t Užpakalinis užkrovimas ant pakeliamo stalo su varomaisiais ritinėliais ir automatinio rietuvės padėties nustatymu pradiniame taške Varomieji ritinėliai ant pakeliamo stalo pjovimo staklėms 3800 x 2200 mm su šoniniu užkrovimu

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Nodpfxovnv Uzo Aghewp Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Nedot Hagnepfx Aghewp Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: geras (naudotas), pjovimo aukštis (maks.): 200 mm, grandis plotis: 400 mm, įėjimo įtampa: 380 V, aukščio reguliavimo tipas: elektrinis, sukimosi greitis (maks.): 3 400 aps./min, galia: 37 kW (50,31 AG), Maksimali darbinė aukštis: 200 mm Njdpfx Agotvpfmjhowp Grandinės plotis: 400 mm Maksimalus atstumas tarp išorinių peilių: 380 mm Peilių skersmuo (min./maks.): 250 / 350 mm Reguliuojamas padavimo greitis (su inverteriu): 5–30 m/min Mažiausias ruošinio ilgis: 1000 mm Peilio laikiklio skersmuo: 70 mm Peilio laikiklio veleno apsukos: 3 400 aps./min. Variklių galia: 2 x 37 kW

Sąlyga: naudotas, Gamybos metai: 2014, bendras svoris: 2 405 kg, keliamoji galia: 500 kg, valdiklio modelis: KRC4, Įranga: dokumentacija / vadovas, Scope of delivery/accessories: Njdpfsulc Uljx Aghswp Mechanics, control cabinet, operator panel, cables

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 278 h, Max. workpiece size for trimming X = 3620 mm Maximum travel: X = 3865 mm Minimum room height: 3.20 m Processing in Y and Z Y = 1600 mm; Maximum panel width: 2000 mm Maximum workpiece height: 300 mm Measured from top edge of vacuum cup: 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by USB dongle for the machine CabinetControl Base Software for furniture design and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control system Siemens Industrial PC control Handheld control device for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24,000 rpm, stepless adjustment Cardanically mounted; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 Pick-Up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 individually selectable vertical spindles Arranged in L-shape, 11+2 in X-direction, 6 in Y-direction, 32 mm pitch n(max.) 1,000–5,710 rpm, stepless adjustment 6 horizontal spindles 2 double-drilling spindles in X-direction 1 double-drilling spindle in Y-direction including saw unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1,000–7,330 rpm, stepless adjustment MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X-direction Display and positioning of consoles and suction cups via the program 2 lateral stops at field A and D, 2 large-area pushbuttons for clamping and releasing workpieces, 2 tape measures for positioning consoles in X, referring to stop at field A/D, tape measure indicators for suction cups at every console in Y, referring to rear stop STOPS 2 additional processing fields at the front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one stop per console and one stop laterally in X-direction LOADING AIDS 4 pneumatically liftable and lowerable loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel), automatically moves in X-direction Mobile tool changer 7886, single-position saw blade magazine Specifically for large saw blade diameters up to 350 mm Pick-Up system installed on the gantry, pneumatically operated Nwsdpfx Agjxfaf Uehsp Max. tool diameter: Ø 350 mm Tool changer 7892, 16-position linear Pick-Up VACUUM PUMP 140 m³/h dry-running LED lamp for the processing area. SAFETY OPTIONS Safety enclosure according to CE standard Safety fence on the side and rear EQUIPMENT VARIANTS AND ACCESSORY LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field processing and large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements per field A/D Max. 5 frame clamping elements can be controlled simultaneously per module. Simultaneous opening/closing of connected frame clamping elements, incl. foot pedal for activation, max. 2 pcs per field A and D orderable. OPTIONAL: LASER – laser pointer Consisting of two laser pointers for positioning the vacuum cups.

Sąlyga: naudotas, No. 04485 Veneer Press Ott JU 2513 Used Electrically heated platens Hydraulic pressing force Aluminum heating platens Platen dimensions 2550 x 1350 mm (L x W) BUSSE heating platens renewed in 2019 and covered with Mylar film 4 hydraulic cylinders, each with 90 mm diameter Total pressing force 90 tons Specific pressing force 2.8 - 4.0 kg/cm² Push-button controls for close/open/stop Emergency stop pull-cord Opening height 400 mm Total power 19 kW Sturdy construction with 3 longitudinal beams in the press upper part and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm (L x W x H) Weight approx. 4200 kg Nwodpfx Agew Npbzehsp To avoid any misunderstandings, an on-site inspection by appointment is possible and recommended. The sale is conducted as-is. Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; purchase is considered "as seen and inspected." Payment terms: Prices plus statutory VAT. Payment required before collection or shipping. Delivery terms: ex stock.