Balu presas

Avermann AVOS 1410 BR5-45/80

Būklė: naudotas, Gamybos metai: 2014, spaudimo jėga: 122 t, bendras svoris: 40 000 kg, slėgis: 315 juosta, Machine has been used internally but is now surplus and therefore offered for sale! Dujdpfx Aowa N U Deffjp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Duodpfx Ajv T I Evoffop Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AR5xxxx, spaudimo jėga: 28 t, bendras plotis: 2 015 mm, bendras ilgis: 4 400 mm, bendras aukštis: 2 500 mm, bendras svoris: 3 000 kg, pildymo angos ilgis: 1 360 mm, pildymo angos plotis: 1 660 mm, galia: 5,5 kW (7,48 AG), naujas hidraulinis presavimo konteineris su išsiliejimo apsauga, tinkamas likusio drėgno atliekų presavimui Dujdeydlfxepfx Affsp

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Press force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length is variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughputs at a bulk density of: 30 kg/m³ approx. 6.0 t/hour 50 kg/m³ approx. 10.5 t/hour 100 kg/m³ approx. 17.5 t/hour Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC controller: Siemens S7-300 Display panel: Pulsotronic Installed machine dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight of press: 16 t Special Equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting 'difficult' materials and loose bulk materials of small particle size • Control cabinet air-conditioning • Machine feet height increase by 200 mm Comment: The machine was serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhauling the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right below the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Steel guide rails left/right above in the frame renewed • Replacement of the entire base plate, four-part, made from wear-resistant HARDOX steel • Wire feed rails in the press floor newly welded and smoothed • Replacement of counter knife, two-part, in the frame • Adjustment of the knife gap to approx. 2.5 mm • Disassembly of the tie and twisting unit, breakdown into individual parts, overhauling the mechanics, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-adjusted, chains lubricated and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses renewed • Oil and air filters renewed • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, was chemically analyzed, is still in good condition and therefore was not replaced; it can continue to be used • General maintenance carried out Duodpjx A U Ncefx Affop Finally, the press was subjected to a machine test in manual and automatic mode; see video for machine function test.

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, Dsdjymmtcjpfx Affjup We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: geras (naudotas), Gamybos metai: 2012, Pirminis smulkintuvas nėra pasiūlymo dalis (viršutinė dalis). Siūloma tik apatinė dalis. Popieriaus presas / balų presas PRESTO CC 40 V Gamintojas: PRESTO GmbH & Co. KG Dsdpfx Afoyrt T Tofeup Mašinos tipas: CC 40 V Mašinos numeris: 28074 Pagaminimo metai: 2012 Tuščias svoris: 4200 kg Maks. darbinis slėgis: 260 bar Apsaugos klasė: IP55 Nominali srovė: 30 A Nominali įtampa: 400 V, 50 Hz Nominali galia: 15 kW Elektros jungtis: 35 A gG Mašinos tipas: horizontali popieriaus ir kartono balų presas

Būklė: geras (naudotas), Gamybos metai: 2018, veikimo valandos: 40 350 h, Funkcionalumas: visiškai funkcionalus, Baler Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Djdpfoybaniox Affjup Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1200 cbm/h Output at 30-100 kg/cbm: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2000 L Transport dimensions (press): 10400 x 2400 x 2800 mm (LxWxH) Weight: approx. 27,000 kg The press was dismantled from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data are based on information provided by the manufacturer. We accept no liability for the information given or for any possible errors. This offer is subject to change, prior sale reserved, and may be revoked at any time. Viewing is possible by prior arrangement. Sale is ex-works, payment in advance, without warranty or guarantee.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 433 h, Funkcionalumas: visiškai funkcionalus, Vertikali balionų presas HSM V-Press 860 plus, pagaminimo metai 2019 Techniniai duomenys: Gamintojas: HSM Tipas: V-Press 860 plus Metai: 2019 Darbo valandos: 433 Presavimo jėga: 60 t Variklio galia: 4 kW Pakrovimo anga: 1195 x 645 mm Pakrovimo aukštis: 1114 mm Baliono išmatavimai: apie 1200 x 1200 x 780 mm Djdpfxeyrngno Affoup Baliono svoris: 480 kg Suraišiojimas: rankinis Teorinė ciklo trukmė tuščiąja eiga: 25 s Teorinė presavimo galia: 12 m³/h Matmenys: 1800 x 1253 x 2990 mm (PlxGxA) Svoris: 2213 kg Medžiagos: plėvelė, popierius, kartonas, štampavimo likučiai, drabužiai, didmaišiai, polistirenas Pastaba: Presas labai geros būklės. Atkreipkite dėmesį: Visa techninė informacija remiasi gamintojo duomenimis. Už pateiktus duomenis ir galimas klaidas neatsakome. Pasiūlymas nėra įpareigojantis, galimas tarpinis pardavimas ir atšaukimas bet kuriuo metu. Apžiūra galima pagal susitarimą. Pardavimas iš vietos, be garantijų ir pretenzijų. Apmokėjimas – 100% išankstinis.