Hidraulinės giljotininės žirklės

ATLANTIC XTSL 4006

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1994, darbinis plotis: 4 000 mm, maks. lakšto storis: 6 mm, galinis atmušas: 700 mm, bendras svoris: 7 500 kg, atstumas tarp stulpų: 4 010 mm, TECHNINĖ INFORMACIJA Lakšto plotis: 4.000 mm Lakšto storis: 6 mm Gedpfxjyhmfzj Ab Setw Stovų atstumas: 4.010 mm Galinio atmušėjo eiga: 700 mm ĮRENGINIO DUOMENYS Įrenginio svoris: 7.500 kg Bendra galia: 16 kW

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Gtsdpfx Abohzbipj Sow Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Yra pilnai įrengtas bistro. Sudedamosios dalys: 1) Indaplovė su pralaidumo funkcija. 2) Baldai. 3) Maža ir didelė virtuvė. 4) Klientų įranga, pvz., stalai, kėdės ir savitarnos barai. 5) Šaldytuvai. 6) Frytuvės ir griliai. 7) Kasos aparatai ir svarstyklės. 8) Indai, lėkštės ir kt. 9) Ištraukiamoji ir filtravimo technika. Yra dokumentacija. Galima apžiūra vietoje. Gtsdpfexc Nhmex Ab Ssw

Būklė: paruoštas naudoti (naudotas), Įranga susideda iš: - 3 Elba atraitų nuėmėjų, kurių talpa 5 t - 1500 mm - Tiesinimo blokas RAS 26.45 - RAS kampų išpjovimo blokas - RAS hidraulinis blokas standumo briaunų ridenimui metale - RAS žirklės ilgiui kirpti RAS 82.16 - RAS lenkimo staklės Greitis: 15 m/min Galia: 16 kW Gsdpfx Abswwbf Ns Sotw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Pressure: 100 t Bending length: 2250 mm Frame width: 2050 mm Ram stroke: 275 mm Daylight (upper to lower beam): 410 mm C-frame throat: 300 mm X-axis travel, CNC programmable: 550 mm Z1+Z2 axes travel, CNC programmable/manual, 4 backgauge fingers: mm R-axis travel, CNC programmable: 130 mm Gsdpfx Abevzcm Dj Sstw Approach speed: 100 mm/sec Bending speed: 0–10 mm/sec Opening speed: 100 mm/sec Operating hours: 13,000 h Length: 3500 mm Width: 2000 mm Height: 2600 mm Weight: 5700 kg Total power requirement: 9 kW Required floor space approx.: 4 x 2 x 2.7 m All machines can be inspected under power at any time. Demonstrations are possible at any time. Front light curtain protection motorized, adjustable (Fissler) Rear SICK light curtain protection Manual crowning Promecam tool holders

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Sheet width: 3230 mm Sheet thickness: 2.5 mm Sheet thickness (stainless steel): 1.5 mm Strokes per minute: 28 - 42 spm Gtjdpfexacd Njx Ab Ssw Cutting angle: 1.60 degrees Table height: 820 mm Frame gap: 3540 mm Control unit: ELGO 87P Motor power: 6.8 kW Machine weight approx. 3410 kg Dimensions (L x W x H): 4070 x 2070 x 1400 mm From a maintenance workshop Including special accessories (!!) Equipment: - Heavy-duty / motorized swing-beam guillotine shear - Break-proof, torsion-free all-steel welded construction - Compact and well-arranged machine design - NC electro-motorized backgauge - Including NC ELGO "TYPE 87P" digital control unit * Adjustable from the front right * With setpoint/actual position input * Infinitely variable setting across the full travel range * Coarse adjustment via push buttons * Limit positions secured with end switches - "Duo-Cut" drive with two dynamic, high-performance gear motors - Support table with hand recesses - Hold-down beam with hard rubber strip - Double-edged all-steel blades - Selector switch for single and continuous stroke - 1x free-moving foot switch - Rear safety device - Original operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cuts - 1x extra-long side stop with support leg + digital gauge - 2x extra-long front support arms * With "SLIDING" mount for easy repositioning

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Godpfet Hw Shox Ab Sjtw Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naudotas, Gamybos metai: 1999, Sheet width 3000 mm Sheet thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Back gauge operated manually Gtedpfx Ajr Ngtieb Sew

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1998, darbinis plotis: 2 000 mm, spaudimo jėga: 35 t, Press force 35 tons Maximum bending length 2000 mm Gsdpfxjwagyko Ab Sotw Back gauge Drive power 4.5 kW Weight 3000 kg

Būklė: naudotas, Gamybos metai: 1978, Sheet width 3100 mm Sheet thickness 2 mm Back gauge 1000 mm Gjdpfxouagxpo Ab Setw Shear angle 1°06' Stroke rate 45 strokes/min Total power requirement 3.0 kW Space requirement approx. 3600 x 2200 x 1600 mm Weight 4500 kg Equipment: - Electrically driven motorized back gauge - Digital ELGO position display - Manual blade clearance adjustment - 1x side gauge with mm scale - 2x support arms - 1x movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal support device for thin sheet cuts