Vertikalios formos, užpildymo ir sandarinimo mašina

AMTEC VFFS 4S-RD DCB 50

Gamybos metai: 2025, Sąlyga: naujas, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with high or low flowability. The vertical form-fill-seal machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages such as English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film feed, dual feed possible, air separator/extraction device (removes air from the bag before sealing—no vacuum is created), holding fixture for heavy finished bags, euro slot punching device, suitable for OPP and PE film (PE unit available at extra cost, if required). - Specifications of the VFFS packaging machine: - Filling range: up to 5000 ml - Film width: max. 620 mm - Bag size min-max: L(100-400) x W(180-300) mm - Max. idle machine cycle rate: 45 cycles/minute - Stainless steel 304 - 220 V, 5 kW - 6 bar, 0.3 m³/min - Machine dimensions (L x W x H): approx. 1780 x 1850 x 1950 mm Gjdov Nmk Aspfx Adpstt - Weight: 700 kg - Specifications of auger dosing unit: - Filling capacity up to 50 l (hopper) - Filling range: 10-5000 g - Max. idle machine cycle rate: 40 cycles/min - Accuracy: ±0.3~1.5% (depending on product) - 380 V, 3 kW - Dosing unit dimensions (L x W x H): 600 x 1250 x 1200 mm - Weight: 220 kg Screw conveyor for automatic material transport to the dosing unit. The vibration motor ensures even product flow. Feed hopper with up to 150 liters capacity. Size depends on the customer-specific final system. - Specifications: Hopper, conveying length, and angle can be adjusted according to customer/product-specific requirements. Overall dimensions depend accordingly. Conveying length: 3~4 m; stainless steel 304; conveying speed: 3.0 m³/h - 12.0 m³/h; 380 V, 0.8 kW-4.1 kW; weight: 130 kg – 270 kg. Deviations from the stated specifications are possible. Support rod optionally available. The discharge conveyor belt features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220 V, 0.55 kW; dimensions (L x W x H): approx. 1850 x 550 x 1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L2980 x W3650 x H2600 mm, depending on final configuration. The system must be adapted to customer/product-specific requirements. Therefore, there may be deviations in the specified specifications for the modules and machines. Key components: - Color touchscreen display SIEMENS - PLC controller SIEMENS - Servo motor SIEMENS - Cylinder AIRTAC - Solenoid valve AIRTAC - Relay OMRON - Servo motor for film transport SIEMENS The machine/system is also available in different versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than the usual prices for used machines. Feel free to make an inquiry and let us know your packaging requirements. Typically, 30-50 different new machines are always immediately available from stock. In addition, we offer very short delivery times starting from approx. 3 weeks for custom-built machines. All machines are available with full warranty.

Gamybos metai: 2025, Sąlyga: naujas, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photo sensor (print mark recognition) for sealing/cutting position; pneumatic end-sealing unit; servo motor for film draw-off; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 2~200g; volume per weighing head: 0.5L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost). - VFFS machine specifications: Max. machine cycle rate (idle): 65 cycles/minute; bag size: L(40-250) x W(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.5m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 580kg. Gedpfov Nm T Rox Adpett Please note that our new machine prices are often below the typical used machine prices. Simply contact us and tell us about your packaging project. We generally have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are available with full warranty.

Gamybos metai: 2025, Sąlyga: naujas, Vertical packaging machine including dosing unit(s) with 6 production lines for the manufacture of “stick-packs” with center back seal (alternatively: 3- or 4-side sealed – at extra charge) for packing standard liquids (water, vinegar, etc.). PLC and color touchscreen from OMRON, self-diagnostic function. Pneumatic components by AIRTAC, OMRON temperature PID control, electronic components by SCHNEIDER and OMRON. Film feed with AB converter control, stainless steel version (SS304), piston pump with 60-liter hopper. - Specifications: max. idle machine cycle rate: 6x60 cycles/min; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1600xW1400xH1900mm; weight: 550kg. Gtedpfx Aev Nmd Njdpst The machine/system is also available in further versions for various packaging sizes and speeds. Please note that our new prices are often below usual used prices. Feel free to contact us and tell us your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. – All machines are supplied with full warranty.

Sąlyga: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for the manufacture of stick packs with center back seal (alternatively: 3- or 4-side sealed – at extra cost) for packing powders (pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnostics. Pneumatic components from AIRTAC, temperature PID control by OMRON, electronic components from SCHNEIDER and OMRON. Film transport, AB inverter control, stainless steel design (SS304), auger dosing unit with servomotor, including hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate (idle): 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. Godpfx Aov Nmftsdpjtt The machine/production line is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used machine prices. Feel free to contact us with your packaging requirements. Typically, 30-50 different new machines are available for immediate delivery from stock. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with full warranty.

Sąlyga: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 6 production lines for the manufacture of stick packs with center back seal (alternatively: 3- or 4-side sealed – at extra cost) for the packaging of powders (pepper, milk powder, etc.). PLC and color touchscreen by OMRON, self-diagnosis. Pneumatic components by AIRTAC, temperature PID controller from OMRON, electrical components by SCHNEIDER and OMRON. Film feed, AB converter control, stainless steel design (SS304), auger dosing unit with servo motor and hopper. - Specifications: Accuracy: +/- 0.3-1%; max. machine cycle rate (idle): 6x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; pouch sizes: L(50-350)xW(10-68)mm; power supply: 220V, 4.5kW; compressed air: 1.5m³/min, 6bar. Machine dimensions: L1600xW1400xH1900mm; weight: 550kg. Godsv Nmfyspfx Adpstt The machine/system is also available in other designs for various packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Please do not hesitate to contact us with your packaging application. – We generally have 30-50 different new machines available from stock for immediate delivery. In addition, lead times for custom-built machines are usually very short, starting from approx. 3 weeks. – All machines are offered with full warranty.

Sąlyga: naujas, Gamybos metai: 2025, Vertical packaging machine including dosing unit(s) with 4 production lines for manufacturing "stick-packs" with a medium back seal (alternatively: 3- or 4-side sealed – at extra cost) for packaging granulates (sugar, salt, etc.). PLC and color touchscreen from OMRON, self-diagnosis. Pneumatic components from AIRTAC, temperature PID control from OMRON, electronic components from SCHNEIDER and OMRON. Film drive, AB converter control, stainless steel version (SS304), oscillating cup filling unit for granulates. - Specifications: max. machine cycle rate in idle: 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power supply: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. The machine/system is also available in various models for different packaging sizes and packaging speeds. Gtjdpfx Ajv Nmc Sjdpst Please note that our new machine prices are often below typical used machine prices. Simply inquire and let us know your packaging requirements. – Typically, 30-50 different new machines are always available ex stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times of around 3 weeks. – All machines are available with a full warranty.

Sąlyga: naujas, Gamybos metai: 2025, I-, Z- or L-shaped belt conveyor for transporting small and large-volume, wet/damp, or deep-frozen products to the weighing unit. Open design, corrugated sidewalls, water-resistant, all product-contact parts made of polyurethane and certified according to FDA 21 CFR 177.2600. - Specifications: Conveyor tray dimensions: L (customizable to product)xW250xH50mm; stainless steel frame; adjustable conveyor speed; conveyor dimensions: L (depending on conveyor incline)xW450xH3000mm. The machine/system is also available in other versions for different packaging sizes and packaging speeds. Gedpfx Adjv Nml Tspstt Please note that our new prices are often below the usual used equipment prices. Feel free to send us an inquiry and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock at any time. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty.

Sąlyga: naujas, Gamybos metai: 2025, Compact vertical packaging system for small 3-side seal sachets. The system is designed for three different dosing units, allowing packaging of granulates, powders, and liquids. Changing product types requires rebuilding the system, which demands technical expertise. Dosing unit configurations are selected based on specific customer product requirements, from which the relevant specifications are derived. PLC and 7" touchscreen by OMRON, PID temperature control by OMRON, electronic components from SCHNEIDER or OMRON, pneumatic components from AIRTAC. Features include self-diagnostic functions, motorized tension control, and fast, uniform film transport. – Specifications: max. machine cycle speed (idle): 50 cycles/minute; bag dimensions: L(30-180)xW(10-80)mm; bag type: 3-side seal sachets; vertical seal width: 8mm; horizontal seal width: 8mm, cut type: zigzag seam; film width: max. 180mm; suitable for laminated BOPP/PE films; film drive: servomotor; horizontal sealing unit: pneumatic; hot-stamp coder: 2 lines with 10 characters each; power supply: 220V, 2.5kW; stainless steel construction (SS304 – optional SS316); packaging machine dimensions: L1400xW1100xH1400mm; weight: 400kg. Gedpfev Nmc Esx Adpstt Please note that our new machine prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – We generally have 30–50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines come with a full warranty.

Gamybos metai: 2025, Sąlyga: naujas, Vertical packaging machine, high-speed version with continuously rotating sealing knives, suitable for flat bags, MITSUBISHI PLC, WEINVIEW touchscreen operator monitor, automatic program setup, registration mark sensor, quick-change forming unit, sealing unit with servo motor, servo motor for film transport, double transport possible. - Specifications: Bag size: L(80-500)xW(70-265)mm (single-pulling); Film width: 170-560mm; max. machine cycle rate (idle): 180 cycles/minute; stainless steel; 380V/7.5kW; 6 bar, 0.25m³/min; machine dimensions: L1500xW1200xH1620mm; weight: 700kg. Please note that our new prices are often below the usual prices for used equipment. Simply inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty. Gjdpfx Adov Nmykepett

Gamybos metai: 2025, Sąlyga: naujas, Vertical packaging machine including dosing unit(s) with 12 production lines for manufacturing 'stick packs' with a standard centre back seal (alternatively: 3- or 4-side seal – available at an additional cost) for packing regular liquids (water, vinegar, etc.). PLC and colour touchscreen by OMRON, self-diagnostics. Pneumatic components from AIRTAC, temperature PID by OMRON, electronic components by SCHNEIDER and OMRON. Film transport, AB converter control, stainless steel version (SS304), piston pump with 60-litre hopper. – Specifications: max. machine cycle rate in idle mode: 12x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-30)mm; power supply: 220V, 7.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1900xW1500xH1900mm; weight: 880kg. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. – We usually have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty. Gtedev Nmfmopfx Adpot