Skaičiavimo mašina

AMTEC LEG-COUNT-SHWR

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Forming depth: 12 mm, working area: 100 x 70 mm, max. roll diameter: 250 mm, speed: 1–30 cycles/min, with documentation, the machine has never been used. Podpfsn R Nhfex Af Njpl

Sąlyga: paruoštas naudoti (naudotas), Table diameter: 1000 mm, tool height: 80 mm, sealing pressure: 1.6 t, number of stations: 4, connected load: 3 kW, including tooling, machine has seen very little use. Ppsdpfx Afjif Elge Nsl

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Counting performance: Tablets: 2,600/h, Capsules: 800/h, Containers: 30/h. Batch capacity: 10,000 units. Material: stainless steel. Machine dimensions (X/Y/Z): approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible. Ppedevzbhyspfx Af Njl

Sąlyga: naujas, Gamybos metai: 2025, Horizontal packaging machine, MINI VERSION, for pre-made Doypacks, block-bottom bags or flat pouches. Modules for specific pouch features such as zip/press closures, twist caps (spout), and gusset forming can be integrated. Optional: batch/date printer, gas flushing module. Pouch detectors monitor correct placement and full opening of the Doypack bag. Immediately after pouch detection, the product is discharged into the pouch via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the Doypack bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: Stainless steel housing (SS304); max. machine cycle rate (idle): 7 cycles/minute; pouch width: 100-300mm; pouch length: 100-350mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, 1-phase, 1kW; machine dimensions: L1754xW510xH1617mm. Pjdpfev Nllljx Af Nspl Please note that our new prices often undercut the usual prices for used machines. Feel free to ask and tell us about your packaging task. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are offered with full warranty.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, VFFS machine for the production of doypacks with zipper, including 4-head linear weigher. Equipped with: touchscreen, PLC, photo sensor (print mark detection) for sealing/cutting position, pneumatic sealing unit for end sealing, servo motor for film feed, thermal transfer printer for batch number, date, best-before date. VFFS Machine Specifications: Podpov Hpfksfx Af Nspl Max. machine cycle rate in idle mode: 35 cycles/minute; 2 forming sets for bag sizes: approx. L 210mm & 300mm, approx. W (70–300)mm; Suitable film width: 280–720mm; Product-contact parts made of AISI304. Weighing Unit Specifications: 4 weighing heads; Weighing range: 50–2000g; Weighing hopper volume: 3L; Product-contact parts made of AISI304. Brand new and under warranty. Immediately available from Reinbek.

Gamybos metai: 2024, Sąlyga: naujas, Slow-Speed Side Mill Rotor Diameter (mm): 180 Rotor Width (mm): 180 Rotor Speed (rpm): 150 Ppodpfx Afjqmik Is Nel Drive Power (kW): 3 Number of Rotor Blades: 18 Number of Stator Blades: 2 Screen Perforation (mm): >5 Weight approx. (kg): 140 The slow-speed side mills of the GSL series are primarily used in injection moulding and blow moulding applications for inline granulation of sprues and defective parts. Thanks to various hopper and extraction systems, the machines can be flexibly integrated into existing installations. GSL 180 For granulating sprues from injection and blow moulding processes Highlights of the GSL series: - Low noise due to the low rotor speed, angled cut, and multi-layer sandwich soundproof hopper - Powerful and efficient drive with branded gearbox - Easy maintenance, cleaning, and blade replacement The slow-speed side mills of the GSL 180 series are equipped with a closed rotor of 180 mm diameter. Machines are available in working widths from 120 mm to 430 mm. The rotor is made up of individual discs, directly connected to the spur gearbox via an oversized drive shaft. This ensures efficient, low-maintenance power transmission. The material to be granulated can be fed manually, by conveyor, or by robot through the generously dimensioned, soundproof sandwich-type hopper. As standard, the mill is mounted on a low base frame with castors. Material discharge is carried out via a suction tray slid beneath the screen, with a pipe connection for a suction conveyor. Applications The slow-speed side mills of the GSL 180 series have been specifically developed for granulating sprues from injection and blow moulding production. Their easy accessibility allows for speedy colour and material changes. The low rotor speed enables the processing of both soft and hard materials, ensuring high material quality with minimal dust generation.

Sąlyga: naujas, Gamybos metai: 2025, Vertical packaging machine, high-speed version with continuously running sealing jaws, suitable for flat pouches and gusseted pouches, equipped with MITSUBISHI PLC, WEINVIEW touchscreen control monitor, automatic program setup, registration mark sensor, quick-change forming set, sealing unit with servo motor, and servo-driven film transport; double-pull operation possible. – Specifications: Bag size: L(50–300) x W(50–240) mm (single pull); film width: 130–510 mm; max. machine cycle rate (idle): 180 cycles/min; stainless steel; 380V/9.0kW; 6bar, 0.25m³/min; machine dimensions: L1700 x W1300 x H1700 mm; weight: 700kg. Ppsdpfev Nmydex Af Njl Please note that our new machines are often priced below typical used equipment. Feel free to enquire and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Gamybos metai: 2025, Sąlyga: naujas, Suitable for counting sweets, cookies, nuts, vegetables, onions, and many types of free-flowing solid granulates. The counting machine is equipped with electronic photo sensors (dust-resistant), as well as additional functional sensors and alarm features. Materials are evenly and gently conveyed to the collection bin via four counting channels using belt conveyors. The feed hopper’s special design prevents product jams. Operation is via an easy-to-use touchscreen; the control menu is available in either German or English. - Specifications: Number of conveyor lanes: 4; Capacity: depends on product type, shape, and quantity; Filling quantity: 2–9999 units (adjustable); Product size: min. Ø 10mm, max. Ø 60mm; large feed hopper; compressed air: 6 bar; power: 220V, 0.6–1.7 kW; machine dimensions (LxWxH): custom-built. The photo shows the 8-lane version. The machine/system is also available in other versions for various packaging sizes and packaging speeds. Psdpfxsv Nk I Ej Af Nepl Please note that our new prices are often below the usual prices for used equipment. Simply contact us and specify your packaging requirements. We typically stock 30–50 different new machines available for immediate delivery. For custom-built machines, we offer very short lead times, starting at approximately 3 weeks. All machines are supplied with a full warranty.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Diverse, Complete can filling line Very good condition! We have used the system for slightly moist and sticky pipe tobacco, so it can be used for all free-flowing products, for example spices, nuts, seeds, gummy bears, and many other types of food products. All components of the line have been matched by an experienced team and have been used as a complete line. If you want to fill free-flowing products into cans, or even first into bags and then into cans (both options are possible), then this is the perfect system for you. The system can fill both into tubular bags and directly into cans. The entire system has a capacity of 30 cans per minute. Some components of the line, such as the capper and the labelling machine, have a significantly higher capacity. Configured for 400 ml cans, we have used Obeck and Polipack cans, and both worked flawlessly. Other can formats are possible; the system can be adapted for this purpose (additional costs will apply). The line consists of: - 14-head multihead weigher with platform (working platform): 1.9 m x 1.9 m x 1.8 m incl. ladder, safety railings, and automatic product feed from Hangzhou Zon Packaging (do not be put off – parts availability is very good and the system is extremely reliable!) Psdpfx Afex Arbvo Nopl - Form-fill-seal bagging machine with Siemens control from Hangzhou Zon Packaging - Can filling machine from Wellman Anlagentechnik GmbH - Can unscrambler from Tölke with automatic can feeding (cans can be loaded by the carton) - Capper from Bosch with automatic lid feeding (lids can be loaded by the carton) - Labelling machine for lid and side labels from Herma Alternatively, a screw conveyor for product infeed can also be offered, allowing the product to be filled directly from Euro bins and automatically dosed. Components of the line can also be purchased individually.

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Small Parts Counter Caterpillar U-60 (5-25 mm) The Caterpillar U-60 small parts counter is a semi-automatic counting system designed for automatically reaching a target count. The system is ideally suited for workstations requiring quick part changes and for small to medium counting quantities. Input Voltage: EU: 230 V AC, 50 Hz Electrical Connection: Single-phase Ppedpfxox Ex D Eo Af Nsl Power: 120 W Weight: 70 kg Dimensions (H x W x L): 794 x 284 x 770 (mm) Function Description: One-time setup for a short object Select recipe (part, number of bags, quantity per bag) Manually insert parts into the caterpillar receiving opening The system stops automatically once the target quantity is reached. Main Features: 99.9% accuracy Part size range: 5 mm–25 mm Fast setup: takes approx. 60 seconds One-time setup per part Object versatility: one system can count numerous object types Quick changeover between items The machine stops counting at the specified number User-friendly interface Counting data is stored and can be easily retrieved.