Ritininis transporteris

AMI Fördertechnik Rollen -motorisiert

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control: Charmilles Millenium Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed up to 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total system weight: 6,300 kg Upon receipt of order, the machine will be cleaned, fully overhauled, and tested for all functions by us. Options: Gjdpfxsuuz Iie Abdjbg - Commissioning of the machine at your site - On-site training - Chiller unit - Transport - Clamping rail set

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel Gbjdpfsgwt S Tsx Abdeg • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH

Sąlyga: naujas, Capaciteit, Ø mm ----- 57 x 2 Gjdpfxsga T E Ae Abdobg Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Doornlengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadzoeker en buispositioneerder, elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van bedlengte

Sąlyga: naujas, Gamybos metai: 2024, Tunneltípusú mosóberendezés fém és műanyag alkatrészek tisztításához. Különböző iparágakban használható, például az autóiparban, élelmiszeriparban, fémmegmunkálásban, lemezmegmunkálásban, műanyag ládák tisztításához stb. Működési elv: A munkadarab szállítószalag segítségével jut be a tunnelbe; a pozícionált szórófejek minden felületet alaposan megtisztítanak. A munkadarab a tunnelben haladva nyomás alatt lévő és felmelegített víz + vegyszer keverékével kerül átmosásra. E folyamat során minden olaj, forgács, valamint egyéb ipari szennyeződés eltávolításra kerül a munkadarab felületéről. A tunnel típusú mosógépek szabványos, illetve az alkalmazásnak megfelelően egyedileg tervezett kivitelben is elérhetők az INTERSONİK mérnöki csapatának köszönhetően. Mosási folyamat: - Mosás - Passziválás - Szárítás A folyamatot az Intersonik folyamatmérnökei tervezték meg a kívánt eredmény és a környezetbarát Intersonik vegyszerek alkalmazásával. A működés folyamata: ► Előmosás ► Főmosás ► Öblítés ► Passziválás ► Szárítás Alkalmazási területek: ► Autóipar ► Katonai-védelmi ipar ► Élelmiszeripar ► Minden gyártóipar, ahol tömeggyártás vagy karbantartás zajlik ► Fém bútoripar A szállítószalagot az INTERSONIK az Ön igényeihez és a munkadarabhoz igazítva tervezi és gyártja. A szalag sebessége állítható. Gbedpfx Asd I Azvsbdog Az automatikus folyadékfeltöltés alapfelszereltség. Az elektromos fűtés standard, hőcserélős vagy égős fűtés opcióként választható. Minden adat digitális kijelzőn követhető és vezérelhető. A PLC vezérlés opcionális. Minden folyadéktartály hőszigetelt a hőveszteség csökkentése érdekében. A ködgyűjtő vákuumszivattyú és egység szintén alapfelszereltség. További opciókért és részletekért kérjük, vegye fel velünk a kapcsolatot. Kulcsszavak: tunnel mosó, automata mosó, autóipari alkatrészmosó, fémmosás, alkatrészmosó, zsírtalanítás, szórófejes mosó, nyomás alatt működő mosóberendezés

Gamybos metai: 2012, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: ENOG, DEMAG KBK crane runway (crane track), approx. 8x4m Load capacity: 250 KG (0.25 tons) Technical data: - Crane runway made from Demag KBK1 + KBK2 rails The system is delivered complete, including: - KBK rails - Rail connectors - Trolleys - End plates - Cable drag chain Gbodpfjmqf Nfsx Abdjg - Suspension brackets/hangers etc. Including Demag DC-COM 250 KG electric chain hoist The crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping via freight carrier or pickup by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1,600 KG. Please inquire about your desired crane runway with overhang and dimensions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: Gedpfx Asl Dw D Eobdsbg - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: naujas, Length 1900 mm Gsdpfxjgvqz Is Abdobg Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 m Machine weight approx. 200 kg Space requirement approx. 1.9 x 0.81 x 0.86 m For collecting and disposing of bulk materials and industrial waste - Tipping container – forklift attachments for in-plant storage of bulk materials - Powder-coated in standard colors: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite grey / custom paint available on request - Tipping mechanism with base plates for swivel and fixed castors - Drainage system - Sturdy base frame with fork pockets - Favorable load center - Robust sheet steel construction with reinforced rim Container capacity: approx. 600 l

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Gbedpfx Abefzktzjdog The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Gedpfx Asu Afu Rebdobg Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Sąlyga: geras (naudotas), Drying oven for UV line Gjdpfxet Ag Uqe Abdebg