AMBAS TIPO AUTOMATINIS PJŪKLAS

AMBAS SN/AU 250 2C

Gamybos metai: 2014, būklė: reikia remonto (naudotas), Funkcionalumas: visiškai funkcionalus, The machine has been out of use for several years, therefore it requires maintenance before being put into operation, which will be the responsibility of the purchaser. Fgjdpfx Aetu U Ebog Isg

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, slėgis: 16 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, temperatūra: 400 °C, įėjimo įtampa: 6 000 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aušinimo tipas: oras, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a revision of the long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator, complete as per original OEM supply, is now available for sale. The unit is NEW, manufactured and fully tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in a controlled indoor environment. Immediate availability allows you to bypass the usual production lead times, which for this kind of equipment are typically 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual casing turbine (Steam Part A + Steam Part B) - 3-shaft integrated gearbox (2 pinions + central gear) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - 3-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, prepared for parallel grid operation Systems included: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump - Local control panel on skid - Control and protection panel equipped with Siemens SIPROTEC 5 - Electronic speed and pressure governor Fgjdjyidvdopfx Ag Iog - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Possibility of installation and commissioning with manufacturer support Possible fields of application: - Biomass and waste-to-energy plants, for production of electricity and process steam, with immediate unit availability — no multi-year production lead times - Industrial cogeneration (CHP) in plants with continuous process steam usage (paper, food, chemical, and manufacturing industries) - Revamping/repowering of existing plants, as a fast-track alternative to new OEM supplies with 24–36 month delivery times Price: Upon request. Further technical information and documentation available upon request.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 145 mm, pjovimo plotis (maks.): 510 mm, bendras svoris: 400 kg, ekstrakcijos antgalio skersmuo: 150 mm, sukimosi greitis (min.): 2 800 aps./min, galia: 5,5 kW (7,48 AG), Pendulum Cross-Cut Saw STROMAB PS 50/F Brand NEW Specification: • Condition – new • Motor power – 5.5 kW • Blade diameter – 500 mm Fedjrdwm Tjpfx Ag Isgg • Motor shaft diameter – 30 mm • Motor speed – 2,800 rpm • Maximum cutting width – 510 mm • Maximum cutting height – 145 mm • Additional extension tables – 2 x 2 m • Weight – 400 kg • Year of manufacture – 2024/2025 • Noise emission – 85.5 dB(A) • Machine complies with CE standards Additional Information: • Tables shown in the photos are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Stated price does not include VAT or shipping costs

Būklė: geras (naudotas), Manufacturer: CLEARING Model: S4-900-180 Condition: Used Stock number: Cod.0274 Press force: 900 tons Number of pressure points: 4 plungers Slide stroke: 940 mm Slide adjustment: 762 mm Strokes per minute: 16 Fgedpfx Agjtzy R Nj Isg Die height at BDC: 1,412 mm Slide dimensions: 4,572 mm x 2,438 mm Bolster/table dimensions: 4,572 mm x 2,130 mm Push-out carriage: Included Clearance (front): 4,622 mm Clearance (side, in upright): 1,400 mm Hydraulic safety: Included Cushion in bed: Included Lower blankholder stroke: 280 mm

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 155-11000, Gamybos metai: 2021, Siūlome šią 3D spausdintuvą Stratasys Fortus 450mc puikios būklės, pagamintą 2021 metais. Fodpfxjym Dl Nj Ag Iegg Jeigu turite klausimų arba jums reikia daugiau informacijos, nedvejodami parašykite mums žinutę arba paskambinkite.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 000 mm, padavimo ilgis X ašis: 1 650 mm, padavimo eiga Y ašimi: 1 000 mm, Z ašies eigos atstumas: 360 mm, veleno greitis (maks.): 4 200 aps./min, gręžimo skersmuo: 40 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, ašies variklio galia: 10 000 W, stalo ilgis: 700 mm, stalo plotis: 1 400 mm, stalo apkrova: 4 000 kg, padavimo ilgis W ašis: 500 mm, Selca S4040D Numerical Control Drilling depth, transverse movement V-axis: 1,000 mm Column, longitudinal movement X-axis: 1,650 mm Drilling slide, vertical movement Y-axis: 1,000 mm Drilling slide, workpiece support movement W-axis: 500 mm Drilling slide, vertical swiveling max – A-axis: +20° / -20° Rapid traverses, adjustable speed up to 10,000 mm/min Drilling diameter in solid material, min-max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fsdpfxoxpwf Tj Ag Iogg Fixed clamping table, dimensions: 700 x 1,400 mm Standard T-slots for clamping: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6: 10 x 40 mm Gun drill holder; shank for drills < 6: 25 x 70 mm Clamping table (B-axis): ROTARY & "BARRASENO" Dimensions: 800 x 1,000 mm Standard T-slots for clamping: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical tilt "BARRASENO" – B1-axis: +20° / -20° Small milling – tapping head etc. Maximum horizontal working stroke Z-axis (830): 360 mm Spindle rotation, adjustable speed up to 2,200 rpm Tapping spindle motor power: 10 kW ISO40 tool changer with 10 rotating/translating stations USED MACHINE

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Diskinis pjūklas profiliams, stiklo laikikliams – OMRM 105, 2022 m. Fedpfxow D Dq Ue Ag Ijgg Techninės specifikacijos: • Automatinis PVC profilių pjovimas stiklo laikikliams 45° kampu • 4 pjovimo diskiniai pjūklo ašmenys • Pneumatinė vertikali užspaudimo sistema • Reguliavimo rankenėlė lengvam formos pritaikymui • Dvigubas stiklo laikiklio pjovimas 45° kampu vieno veiksmo metu • Reguliuojamas pjovimo greitis per valdymo skydelyje esantį reguliatorių • Standartinėje komplektacijoje – tiekimo ir matavimo juostos (2,5 m + 2,4 m)

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: SA/005006, 3-Belt Calibration and Sanding Machine DMC Model USK1350 M3 - CE Compliant - Used - 1 steel roller - 2 rubber rollers - 3 rubber rollers - No. 3 independent motors - Working width: 1350 mm - With pad system (short piece device) - Blower on the third unit - On/off device on each unit - Touch screen control - Serial no. SA/005006 - Year 2004 Fgedpfxswrnmps Ag Iog - CE compliant

Būklė: naujas, Gamybos metai: 2026, Zero defects, no waste, and increased productivity! We have developed the SalvaStop_100 as a fundamental component to give your work an advantage. Fgedekzhb Uspfx Ag Ieg Thanks to its numerical control, this electronic stop manages pushing, stopping, and positioning of profiles to be cut, regardless of the material. This allows you to reduce human error, avoid waste, and lower labor costs. SalvaStop_100 comes equipped with exclusive software featuring an instant, user-friendly, and comprehensive graphical interface, making it simple to operate. You can use SalvaStop either as a standalone unit or in combination with one of our Legend crosscut saws to boost performance, work in complete safety, and eliminate human errors.

Gamybos metai: 2019, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 19-0088, Breton SPS 300/4T ist eine horizontale Spaltmaschine zum Spalten von Keramik-, Marmor-, Naturstein- und Kunststeinplatten, -streifen oder -fliesen. Fgjdpfx Agovupmwo Isg