Aukštos spartos radialinė gręžimo staklės

Alzmetall Alzrapid 32 D

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Gręžimo pajėgumas pliene (skersmuo): 62 mm Išsikišimas: 350-1600 mm Ruoinio aukštis - maks.: 1250 mm Atstumas tarp veleno galo ir stalo: 350-1250 mm Maks. gręžimo gylis: 315 mm Staklių stalas: 2400 x 1000 x 200 mm Gręžimo veleno sūkių diapazonas: 38 - 2000 aps./min Veleno kūgis: MT5 Pado eiga: 0,06 - 1,00 mm/aps. Variklio galingumas: 4 kW Kėlimo variklis: 1,5 kW Alyvos siurblys: 0,75 kW Bendra galingumo reikmė: 6 kW Staklių svoris: apie 3,8 t Užimamas plotas: apie 2490 x 1050 x 2780 mm Veleno variklio žingsniai: be pakopų Veleno padavimo žingsniai: 8 Svirties judėjimo greitis aukštyn žemyn: 1,2 m/min Hodpoyhq T Nefx Aa Donr Svirties pasukimo kampas: ±180 laipsnių Veleno eiga vienam skalės apsisukimui: 122 mm Maks. veleno sukimo momentas: 400 Nm Maks. veleno padavimo pasipriešinimas: 16000 N

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Hjdovv Spkopfx Aa Denr Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Hsdpfx Aasx N Ifto Donr Įrankio laikiklis MK 4 Gręžimo geba 40 mm pliene Sriegiklio įrenginys Aušinimo skysčio įranga Dokumentacija

Būklė: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 2355-2, Offer 24416 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2500 x D 2300 mm - Weight approx.: 1500 kg - with: Hnodpfx Ajufw S Roa Dsr - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Hnodpfjxpfgljx Aa Djr Konsolės eiga 600mm Įrankio tvirtinimas MK 3 Gręžimo pajėgumas 28mm pliene Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Hnedpfx Aajzgvmqs Der Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio.

Būklė: geras (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: N 16601, Pasiūlymas 25387 Techniniai duomenys: - Gręžimo pajėgumas plienui: 60 mm - Gręžtuvo veleno tvirtinimas: MK 5 - Gręžtuvo veleno eiga: 300 mm Hnodpfxjx Ei D As Aa Dor - Skaitmeninis padėties rodmuo eigai ir pozicijai - Konsolės išsikišimas: 1600 mm - Kolonos skersmuo: 350 mm - Didžiausias atstumas tarp veleno ir pagrindo plokštės: 350 - 1650 mm - Konsolės vertikali eiga: 1250 mm - Spindulio apsisukimų dažnis be pakopų: 30 – 1500 aps./min - Pašara be pakopų: 1 – 600 mm/aps. - Variklio galia: 400 V / 8,9 kVa - 2 kubiniai stalai - Aušinimo skysčio sistema - Užimama vieta: apytiksliai Plotis 2490 x Aukštis 2980 x Gylis 1060 mm - Svoris: apytiksliai 3800 kg

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 000 mm, padavimo eiga Y ašimi: 1 050 mm, padavimo ilgis Z ašis: 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Dimensions and Travel Paths Tool holder: SK 40 Table dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance - spindle lower edge min. (mm): 140 Distance - table upper edge max. (mm): 740 Drilling radius min (mm): 540 Drilling radius max (mm): 1590 U-axis travel (mm): 2600 Y-axis travel (mm): 1050 Quill stroke (Z-axis) (mm): 200 Column stroke (W-axis) (mm): 400 Machining Performance Drilling capacity in solid material: St 60 (mm): 40 GG 22 (mm): 50 Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled (kW): 5.5 at 100% duty cycle Speed range (rpm): 15 - 2800 Torque (Nm): max. 250 Constant torque range (rpm): 15 – 200 Feed Drives X-axis – AC servo motor (kW): 0.25 Y-axis – AC servo motor (kW): 0.25 Z-axis – AC servo motor (kW): 4.50 W-axis – AC servo motor (kW): 2.50 U-axis – AC servo motor (kW): 2.50 Rapid traverse speeds (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid traverse speeds (U/W) (m/min): 7.5 / 3 Feed rates, stepless (mm/min): 5 - 2000 Feed force (N): 12000 Hsdpfxey Ttrte Aa Djnr Accuracy Positioning accuracy X, Y-axis (over 1200 mm) (mm): ±0.075 Repeatability X, Y-axis (mm): ±0.03 Positioning accuracy Z-axis (mm): ±0.05 Repeatability Z-axis (mm): ±0.03 Positioning accuracy W-axis (mm): ±0.05 Repeatability W-axis (mm): ±0.03 Electrical Data Operating voltage/frequency (V/Hz): 400 / 50 Control voltage (V): 24 Total connected load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, easily readable from all sides Position display: Cartesian or polar, dimensions absolute or incremental Units: mm or inch, as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-dependent cutting data recommendations Tool management: Up to 500 tools Subprogram support: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible for each cycle Chip breaking / chip removal: possible during drilling cycle Drilling patterns: drill row, bolt circle, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted start Datum determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle determination for round parts by probing reference edges/surfaces Data interfaces Paintwork with signs of use Standard paint, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Test report for mechanics, electrical system, and safety equipment

Būklė: naujas, Drilling capacity in steel (diameter): 50.0 mm Throat depth: 350 - 1,590 mm Max. workpiece height: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Thread cutting: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions (LxWxH): 2,450 x 980 x 2,840 mm Description - Large-dimensioned base plate - Ideal for machining large workpieces Hsdpfx Aaexaad Tj Donr - Thick-walled, precision-ground column for improved sliding properties of the arm - Boom and drill head with independent hydraulic clamping - Easy height adjustment of the boom via lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears running in oil bath - Excellent sliding performance of the drill head on the boom due to ground surface Scope of delivery - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant device - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable protective cover

Būklė: naudotas, Gamybos metai: 1989, Gręžimo galia pliene (skersmuo): 32 mm Išsikišimas: 1230 mm Stalo paviršius: 1200 x 500 mm Gręžimo eiga: 180 mm Padavimas – automatinis: 0,10 - 0,15 - 0,20 - 0,30 mm Sūkių diapazonas: 60 - 1800 aps./min Hjdpfxsy Aa H Ne Aa Djnr Kūginė jungtis: MK 4 Bendra galingumo paklausa: 2,7 kW Staklių svoris apie: 1,8 t Užimamas plotas apie: 2,2 x 1,8 x 2,3 m Greita radialinė gręžimo staklės su: - automatiniu padavimu - sriegimo įrenginiu