Stumdomas stalo pjūklas

Altendorf F45 ElmoDrive

Būklė: naudotas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: Werksüberarbeitungsnummer: WÜA23051204239033, Funkcionalumas: visiškai funkcionalus, galia: 5 kW (6,80 AG), pjovimo plotis ties tiesiniu vedliu: 1 300 mm, pagrindinis pjūklo diskas skersmuo: 550 mm, dalies ilgis (maks.): 3 200 mm, stalo ilgis: 840 mm, F45 Elmo pavara GM010.0407 Mašinos aukštis 910 mm Valdymas akių lygyje Dvipusis pasukimas maks. disko skersmuo 550 mm Variklis 5,0 KW (6,8 AG) Vario 2 ašių įpjovimo agregatas, dvipusis pasukimas LED apšvietimas Stalo plokštės prailginimas 840 mm Dvigubas ritininis vežimėlis 3200 mm Kampinis atramininkas DIGIT LD CNC paralelinis atramininkas 1300 mm Tsdpfx Aaeymdh De Dsa Priekinis laikymo volelis DUPLEX 1350 mm (2019)

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Tjdpfx Aev Erkaoa Dea Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, galia: 5 kW (6,80 AG), pjovimo aukštis (maks.): 200 mm, pjovimo plotis (maks.): 1 300 mm, pjūklo disko skersmuo: 550 mm, pjovimo ilgis (maks.): 3 200 mm, pjovimo plotis ties tiesiniu vedliu: 1 300 mm, stalo ilgis: 3 200 mm, Exhibition machine F 45 Elmo Drive - Tilting + / - 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Digital angle crosscut fence 3200 mm L - CNC rip fence 1300 mm - Manual duplex miter fence 1350 mm - Template holder - On/off switch on double roller carriage Tedpfx Ajuh R R Eoa Doa - Front support roller

Būklė: naujas, Gamybos metai: 2025, Exhibition machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest free-form nesting software Todpfx Aaoxc Rmks Doa - Uninterruptible power supply (UPS, ZB27) - Touchtool tool length measurement - 10.3 kW milling spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Fields A + D in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, single-tool unit magazine swiveling in X and Y directions for Clamex unit - 2 x 140 m³/h and 1 x 250 m³/h vacuum pumps, dry-running, 400 V - 16-circuit vacuum system (VF16), software-controlled, incl. additional 25 meters of sealing cord - Laser pointer – red (one laser pointer) Field D (ZB8) for positioning vacuum cups and defining the workpiece contour - Automatic central lubrication - Vacuum cups for smooth table surfaces, complete, 140x115 mm, height 30 mm, with connection hose - Thin panel pusher as an addition to the pusher for special material under 4 mm thickness and standard wood-based panels under 2 mm - Conveyor belt, complete push-off conveyor belt, push-off table - TouchLabel PRO – touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the push-off conveyor belt - Availability: by arrangement - Location: Flörsheim

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Tjdpfx Ajqlckpsa Dsa Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Formatinė diskinė pjovimo staklė ALTENDORF F 35 Tipas 3 - 1000 -Parodinė mašina- 5,5 kW (7,5 AG), 3 greičiai, Variklinis aukščio ir pasvirimo reguliavimas, Didelis apsauginis gaubtas, Dviguba riedėjimo platforma 3.200 mm, Priekinis pjūklas su LED apšvietimu, CNC lygiagrečios atramos, pjovimo plotis 1.000 mm, Kampinė-fazavimo atrama 3.450 mm, be ilgio kompensacijos, Stalviršio pailginimas/praplatinimas, Aukštos kokybės CDF paviršius ----- Techniniai duomenys ----- Pasvirimo diapazonas: 0 - 46°, Platformos ilgis: 3.200 mm, Tedpfjw Imptox Aa Dja Pjovimo ilgis: 3.100 mm, Pjovimo plotis: 1.000 mm, Pjovimo aukštis: 154 mm, Maks. disko Ø: 450 mm, Variklio galia: 5,5 kW, Ekrano dydis: 15 colių, Darbinio stalo aukštis: 910 mm, Nusiurbimo angos Ø: 80 + 120 mm - nauja parodinė mašina -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, - made of steel Tsdpfx Aajfpa Rps Dja - filling weight 8 kg - with glue gun and nozzle tip

Būklė: naudotas, Panhans 426 storio obliavimo staklės Obliavimo plotis: 630 mm Obliavimo aukštis: 250 mm Elektrinis aukščio reguliavimas su pozicionavimo valdikliu TERSA saugos obliavimo velenas Stalas keturgubai vedamas Pagrindinis variklis: 7,5 kW Padavimas: 7 + 14 m/min. Iš vientiso aliuminio segmentinis spaudimo balkis STAKLĖS DARBINĖJE PATIKRINTOS IR YRA PUIKIOS BŪKLĖS Staklės prijungtos demonstraciniame centre ir paruoštos parodymui Tsdpey Tu R Defx Aa Dea Iš sandėlio Lieboch

Būklė: naudotas, Gamybos metai: 1999, No. 3076 STEGHERR NFT Cross Bar Slot Milling Machine Used, Year of manufacture: 1999 Special milling machine for cutting a groove on the top side of pre-milled glazing bars. Automatic operating sequence: The pre-milled glazing bar is positioned and centered against the stop. By pressing the bar against the stop, the milling process is started. The milling unit moves upward and automatically returns to its home position after machining. Milling motor: 400 V; 1.1 kW; 2.5 A Compressed air connection: 6 bar Tedpfx Ajiyp D Doa Dsa Machine ready to plug in. Mobile base included. All technical details without guarantee, according to manufacturer's brochure. Private sale, VAT is not deductible. Collection in 73430 Aalen Transport dimensions approx. 600 x 400 x 1500 mm (LxWxH) Weight approx. 60 kg To avoid any misunderstandings, inspection on site is possible and recommended by appointment. Sale as is – current condition. Technical information, condition description, year of manufacture and delivery scope according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. No warranty is given on used machines. Sold as seen. Photos and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Payment in advance before collection or dispatch. Delivery terms: ex location.