Storesnis

Panhans 426

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, For sale is a used Panhans thickness planer Type-426 with a maximum planing height of up to 230 mm. The machine is in good condition and has been reconditioned and inspected by our qualified personnel. Njdpfx Afowza Tyjxswg Technical data: - 4-knife Tersa cutter head - Planing width: 630 mm - Maximum passage height: 230 mm - 2 feed speeds - Extraction connection: Ø 160 mm - Motor power: 7.5 kW - Year of construction: 1992 The planer is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, thickness, Felder Reference: R-S24F9

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Nwedev Erkajpfx Afxeg Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Būklė: naudotas, Gamybos metai: 1993, with Centro-Fix reversible knives Machine cleaned, lubricated, partially repainted reconditioned, function tested fully set up trial run performed various parts renewed: 4x Tersa knives rubber guard Nwodpsv Hht Tofx Afxsg used Manufacturer: Panhans Model: 426 Year of manufacture: 1993 Machine No.: 1399 GS-certified for wood dust Motor: 7.5 kW Planing width: approx. 630 mm Planing height: approx. 250 mm Table feed rollers: 2 pieces adjustable Segmented pressure beam Steel infeed roller Rubber outfeed roller 2 x feed speeds Number of knives: 4 Knife system: Centro-Fix reversible knives Digital height display for planing height electric height adjustment with handwheel for fine adjustment sound insulation dust extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee

Būklė: naudotas, Gamybos metai: 2017, Stalo matmenys: 2700 x 900 mm. HSK 63 F laikiklis. 2 x velenai, skirti HSK 63 F laikikliui (30 + 40 mm). Veleno nuolydžio reguliavimas: -45° iki +45°. Naudojama veleno ilgis: 180 mm. Sukimosi kryptis į dešinę ir į kairę. 4 volelių padavimas su varikliniu aukščio ir pločio reguliavimu bei pneumatiniu fiksavimu. 7,5 kW stabdžių variklis su elektroniniu inverteriu. CNC valdymas šiems parametrams: - veleno nuolydžio reguliavimas, - veleno aukščio reguliavimas, - visiško atmušimo reguliavimas, - priekinės atmušimo dalies judėjimas, - stalo padėtis prieš veleną, - elektroninis, laipsniškas apsukų reguliavimas 1.000 – 10.000 aps./min. - Aigner frezavimo atmušimas su aliumininiais grioveliais, - jutiklinis ekranas su grafikos funkcija, - Windows operacinė sistema, - kamera įrankių ir profilių nuotraukų importui, - visiškas atmušimo nuėmimas į šoną, - automatinis žvaigždės-trikampio paleidimas, - centrinė tepimo sistema. Svoris apie 1360 kg. Sandėlio vieta: Nattheim. Njdjyudidopfx Afxjwg

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, storos obliavimo staklės modelis MARTIN T 44 naudota mašina CE žymėjimas: Taip darbo sąlygos: Puikios techniniai duomenys: darb. plotis mm: 630 Nodpfx Asyml E Djfxowg maksimali darbo aukštis mm: 250 maksimalus nuėmimas mm: 8 2 padavimo greičiai m/min: 6 / 12 motorizuotas stalo pozicionavimas su skaitmeniniu ekranu 4 „Tersa“ peiliai pagrindinio variklio galia AG: 7,5 svoris kg: 1115 įtampa: 380/50

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Nedsqlckpepfx Afxswg Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, ašies skersmuo: 30 mm, sukimosi greitis (maks.): 10 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, aukščio reguliavimo tipas: elektrinis, frezos veleno ilgis: 140 mm, Apatinio veleno frezavimo staklės SCM T130E Veleno skersmuo: 30 mm Veleno ilgis: 140 mm Veleno apsukos (kintamos): 3000/4500/6000/7000/10000 aps./min Pagrindinio variklio galia: 7,5 kW Elektroninis veleno aukščio reguliavimas jungikliu Nwodpfx Aoxzyltefxsg Pakrovimas: 4 volelių Padavimo greičio reguliavimas variatoriumi CE sertifikatas Techninė dokumentacija (DTR)

Būklė: geras (naudotas), Parduodama naudota Panhans obliavimo-storėjimo staklė, modelis 445/421, storio aukštis iki 220 mm. Staklė yra geros būklės, mūsų specialistų patikrinta ir paruošta naudojimui. Nwedpfeyidwhsx Afxsg Techniniai duomenys: - 2 juostiniai peiliai - Obliavimo plotis 510 mm - Obliavimo ilgis 2050 mm - Maks. praėjimo aukštis 220 mm - 2 padavimo greičiai - Nusiurbimo anga Ø 140 mm - Variklio galia 4 kW / 5,4 AG Staklės yra A-5431 Kuchl mieste, galima apžiūrėti per mūsų darbo valandas. Susiję terminai: obliavimo staklė, storio staklė, staklės, obliavimas, storinimas Nuoroda: R-R04D8

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Storio obliavimo staklės Gamintojas: Martin Tipas: T45 Pagaminimo metai: 2006 Darbo valandos: apie 128 val. Obliavimo plotis: 630 mm Obliavimo aukštis: 2,8 - 300 mm Galia: 5,5 kW Peilių skaičius: 4 Nodoyvq Htepfx Afxswg Peilių tipas: Tersa 1 vnt. guminis įtraukimo ritinys 1 vnt. guminis ištraukimo ritinys Aukščio reguliavimas: elektrinis Padavimas: 6/12 m/min Stalo ilgis: 1.260 mm Sūkiai: 5.000 aps./min Svoris: apie 1.300 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, SCM TF130 CLASS Spindle Moulder Used machine Year: 2014 Features: - Manual adjustment for the lifting of the spindle arbor, with digital display for setting the working height - Recordable spindle fence with wooden tables, extraction hood and wooden table extension, max tool diameter Ø250 mm - Spindle speeds: 3000/4500/6000/7000/10000 rpm - Electronic display of selected speed - Electrical provision for power feed - Reversible spindle rotation with electrical interlock for start-up - Automatic star-delta starting - Motor power [S6 -40%]: 7 kW / 9.5 HP / 50Hz - Guard for vertical spindle working (max tool diameter Ø160 mm) - Emergency stop button - Safety microswitches on spindle lock - Safety microswitch on motor access door - Lockable main switch - Thermal-magnetic protection - Transformer for 110V auxiliary circuit - Automatic motor brake on main motor - Certificate of conformity according to CE standards Technical data: - Working table size: 1200x730 mm - Usable spindle length: CE Ø30/35(40/50) 140(180) mm - Spindle base height above table: 52 mm - Spindle base height above table with interchangeable spindle: 92 mm - Maximum retractable tool diameter under table, with ring table: 320x85 mm (with Fast sector table: 300x85 mm) - Spindle fence travel with mechanical programming: 125 mm (positioning relative to spindle axis from -125 to +125 mm with MK5 spindle) Njdpfoy R Tw Dsx Afxswg - Extraction port diameter on spindle hood: 120 mm - Extraction ports on base (dedicated for spindle cooling fan): 120 mm - Extraction airflow speed: 20 m/s - Extraction air consumption: 1700 m³/h Options available: - Bar fence - "TL" version for tenoning-profiling (C.E.): * with manual feed tenoning carriage, * eccentric workpiece clamp, * tilting telescopic fence with 4 reference stops for setting workpiece length, * anti-splinter device on the fence with reference stop, * infeed table extension with adjustable front support bar for large workpieces, * tenoning guard with extraction hood: - quick-change tool system, max tool diameter 300 mm - spindle 30 to 35 mm, max tool diameter 300 mm - spindle 40 to 50 mm, max tool diameter 350 mm * emergency stop button * operator protection arm * microswitches for control and speed limitation to 3000/4500 rpm during tenoning operations Note: - Only available for machine configurations compliant with CE standards - Only available with mechanically adjustable spindle fence or, alternatively, "Flex" spindle fence - Main motor minimum power required: 7 kW