ALFAMACCHINE MINIGRAF 44 segiklis

ALFAMACCHINE MINIGRAF 44 zszywarka ALFAMACCHINE MINIGRAF 44

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Kedsw Nbacjpfx Af Ijll Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: geras (naudotas), Morsoe kampinė presė, geros būklės, iš karto prieinama. Pageidaujant, mielai suteiksime daugiau informacijos apie kitus mūsų turimus įrenginius. Klodpfxjh Aka Ie Af Iel Maloniai kviečiame susitarti dėl vizito ir apžiūrėti šią mašiną mūsų įmonėje.

Sąlyga: visiškai atnaujintas (naudotas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Kljdpofmavxsfx Af Iel Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and stroke count. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine supplied with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Compressed air: 8 bar. We have more high-speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50), as well as presses from Schaal and Mabu.

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” Kjdpfjrmucxox Af Isll - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 61549, Perforating and Creasing Machine - Perforation - Creasing Machine W. Kroll Gartenberg K70 Kedpfx Ajh Axwwof Isll Serial No. 61549 Maximum working width: 700 mm Online video inspection via Skype possible We would be pleased to welcome you for a visit – more machines available in stock Available immediately – can be inspected Located in Emskirchen / Nuremberg – test runs possible

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008184, Darbinės srities X ašis: 8185 mm Darbinės srities Y ašis: 1550 mm Darbo paviršius: Su vakuuminėmis konsolėmis Pagrindinio veleno galia: 13 kW Valdomų ašių skaičius: 5 ašys Ksdpfxjw Tivgj Af Iell Įrankių vietų skaičius: 22

Sąlyga: labai geros būklės (naudotas), Coating and packaging line with thermoregulated shrink film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized conveyor) approx. 7600 mm - Reel holder (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) using sealing bar Kljdpsgp Diaefx Af Ijl c) Heat shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is tunnel) with hot air circulation (heated by electric resistors and fan), total installed power kW ? - Conveyor with metal rods (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from approx. 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Ksdpfxsd Rzc Re Af Isll Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Sąlyga: naudotas, Gamybos metai: 2006, No. 3195 CNC Machining Center BIESSE Rover C 6.50 CONF.2 Used, year of manufacture 2006 Machine already dismantled According to our customer, the machine is fully operational Multiple workpieces can be machined simultaneously on this machine Working area X: 4,850/4,600 mm Working area Y: 1,535 mm Electrical power: 228 kW, 39 A Required floor space approx. 8,100 x 6,500 mm (L x W) Total weight approx. 6,800 kg Sale on behalf of a customer, ex location Poland, without dismantling, transport, or installation Subject to errors in description and price Kjdpfx Aevn R A Hsf Iell Dismantling, loading, and transport by us available as an option To avoid any misunderstandings, a site inspection by appointment is possible and recommended Sale is made as-is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as seen Pictures and videos are for example purposes only and do not represent the actual items included Payment terms: Prices plus VAT, payment prior to collection or shipping Delivery terms: ex location

Sąlyga: labai geros būklės (naudotas), TECNI-ARMENTIA CH-70 Edging Machine – Hydraulic control – Programmable cutting width – Memory for up to 12 programs – Centering table TECHNICAL SPECIFICATIONS: Maximum cutting width: 700 mm Maximum cutting height: 130 mm Main motor power: 55 kW Maximum material width: 830 mm Fixed sleeve length: 300 mm Kledoidmptopfx Af Isl Movable sleeve length: 100 mm Minimum material length: 700 mm Spindle diameter: 65 mm Sleeve diameter: 85 mm Saw blade diameter: 350 – 400 mm Feed speed: stepless hydraulic adjustment Maximum feed speed: up to 38 m/min Infeed table length: 2700 mm Roller width: 700 mm Roller diameter: 140 mm Centering infeed table Two lasers Pump motor power: 4 kW Anti-kickback pawl row Three upper feed rollers Three lower feed rollers Hydraulic material hold-down Hydraulic height adjustment Dimensions (L/W/H): 480 / 200 / 230 cm Weight: 4000 kg