Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, siurbimo galia: 1 100 m³/val, neigiamas slėgis: 3 200 Pa, Welding Fume Extractor, Dust Collector, Self-Cleaning Pneumatic Negative Pressure Filter KEMPER. Guodpfxotq E Sie Abmsk Suitable for welding, grinding, and all kinds of dry dusts. Self-cleaning welding fume filter with contamination-free dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation for the filtration of welding fumes and dusts with high concentration levels. Suitable for welding all types of carbon steel, low alloy and high alloy steels, as well as aluminum. Economical in operation due to long filter cartridge lifespan. Thanks to the IFA-W3 approval, the standard version filter can be used for welding high-alloy steels. Equipped with a Start-Stop system for automatic device activation and deactivation. Specifications: - Capacity: 1,100 m³/h - Max negative pressure: 3,200 Pa - Three-phase fan, 1.5 kW motor - Filtration area: 15 m² - Year of manufacture: 2021 - Cartridge filter with PTFE membrane - Filtration efficiency: >99.97% - Built-in delay timer in start-stop mode. - When connected to an optional start-stop sensor, the extraction delay after welding can be set from 5 to 60 seconds. - Device in very good condition. Stock number – 0976

Sąlyga: naudotas, Gamybos metai: 2018, 2018 metų plazmos pjovimo staklės, geros būklės, mažai naudojamos. Parduodamos kartu su metalo stelažais arba be. Trys pjovimo galvos, plazminė ir dvi dujinio pjovimo. Vienu metu gali dirbti arba plazminė galva, arba dvi dujinės galvos iki 100 mm storio, skirtingos technologijos. Storesnius tik viena dujinė galva, dėl dujų konsolės pralaidumo. Gujdpeww Sy Dofx Abmjk Plazma Gamybos metai: 2018 Plazmos šaltinis Kjelberg HiFocus 300A Darbinė sritis (X x Y): 2500 x 13000 mm stalas (1m – saugumo zona, pasidėjus ant stalo du 6000mm ilgio lapus) Minimalūs/maksimalūs pjovimo storiai: Pagrinde buvo pjaunama 20 – 70 mm ribose, minimalaus apribojimo kaip ir nėra, plazma pjauna ir 2mm, maksimalus galimas dujomis 300mm. Plazma skirta iki 50mm kokybiškam pjūviui juodo plieno. Stelažai Gamintojas: OHRA GmbH (Vokietija) Gamybos metai: 2018 Lentynos apkrova: 3T Jei turėsite daugiau klausimų, mielai atsakysime.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 14 408 h, Parduodamas labai prižiūrėtas ir visiškai veikiantis Trumpf TruDisk 4002 (4C) lazerio įrenginys su nauju Trumpf PFO33-2 3D skeneriu (2022 metų gamybos!), galingu Riedel pramoniniu aušintuvu PC80.01/PC802 bei TBH GL230 ištraukimo sistema. Sistema naudota tik pramoninėje gamykloje ir reguliariai prižiūrėta. Dėl 2022 metų skenerio įrenginys ypač patrauklus automobilių pramonei, metalo konstrukcijoms ir serijinei gamybai. Idealiai tinka: suvirinimui, nuotoliniam suvirinimui, terminio apdorojimo, pjovimo, procesų kūrimui, robotų integracijai, automatizavimui. Gusdpfxex Hap Se Abmsk

Sąlyga: naujas, Funkcionalumas: neveikiantis, Gamybos metai: 2024, pavaros tipas: elektrinis, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 1 500 W, maks. lakšto storis: 7 mm, plieno lakšto storis (maks.): 7 mm, nerūdijančio plieno lakšto storis (maks.): 4 mm, įėjimo įtampa: 220 V, aušinimo tipas: vanduo, bendras svoris: 120 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Nauji, gamyklinėje pakuotėje lazeriniai suvirinimo aparatai su vielos padavimo įrenginiu. Pridedama: dvigubi antgaliai, lęšiai, dvi apsauginių akinių poros, 15 kg 1,2 mm vielos. Prie kainos pridedamas PVM ir transporto išlaidos arba klientas pats pasiima įrenginius savo transportu. Įrenginiai – 4 viename sistemoje: suvirinimas, suvirinimo siūlės valymas, rūdžių šalinimas, pjovimas. Guedpfx Absx Akn Iemjk

Sąlyga: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 63 102 h, mašinos/transporto priemonės numeris: A0230A1162, valdymo tipas: CNC valdymas, valdiklių gamintojas: Siemens, valdiklio modelis: Sinumerik 840D, lazeri tipas: CO₂ lazeris, lazdo šaltinio gamintojas: Trumpf, lazero valandos: 28 387 h, lazerio galia: 6 000 W, plieno lakšto storis (maks.): 25 mm, nerūdijančio plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 15 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, darbinio aukščio: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 Working width X: 3000 mm Working width Y: 1500 mm Working stroke Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on-time: 63,102 h, Beam on-time: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminium): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro-welds PMS Plasma Monitoring System Sprint-Las Head distance control (DIAS III) ContourLas AutoLas Plus Oil sprayer Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shutdown Light curtains Gjdpfx Asx Ap A Robmeuk Tele service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, Diese Flow Mach M500-2060 wurde 2019 gefertigt. Sie verfügt über einen großen Schneidbereich von 2000x6000 mm, eine programmierbare Z-Achse sowie die fortschrittliche Dynamix Waterjet XD-Technologie für präzises 2D- und 3D-Schneiden. Ausgestattet mit einem PASER 4 Schneidkopf und einer HyperJet 94i-D Pumpe gewährleistet sie hohe Effizienz. Nutzen Sie die Gelegenheit, diese Flow Mach M500-2060 Wasserstrahlschneidanlage zu erwerben. Kontaktieren Sie uns für weitere Informationen über diese Maschine. Guodpox D Rxpjfx Abmek Anwendungsbereiche Schneiden

Sąlyga: geras (naudotas), For sale: Dalex-Werke PMS11-3 spot welder, 172 kVA, in very good condition. Godpfju Sb Dtex Abmeuk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 52.693.00, padavimo ilgis X ašis: 1 525 mm, padavimo eiga Y ašimi: 1 525 mm, Y ašies padavimo greitis: 1 m/min, padavimo greitis Z ašis: 1 m/min, Welding Robot – Fully Equipped Guodpfxorl S Ufe Abmok Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Sąlyga: naudotas, siurbimo galia: 1 300 m³/val, neigiamas slėgis: 4 800 Pa, Dulkių ištraukėjas, suvirinimo dūmų ištraukėjas, savaime išsivalantis pneumatiniu būdu, vakuuminis KELLER prekės ženklo filtras. Tinka naudoti su plazma, lazeriu, smėliavimu, sodinimu ir bet kokioms sausoms dulkėms. Ventiliatorius įrengtas už filtro – švarioje pusėje, todėl sprogimo rizika sumažinta iki minimumo. Filtras valomas pneumatiniu būdu suslėgto oro impulsais darbo metu, todėl įranga išlieka labai efektyvi. Ventiliatoriaus galia – 3,3 kW. Įėjimo diametras – 250 mm Gjdpfx Aoxyx Htebmouk Našumas – 1300 m³/val. Vakuumas – 4800 Pa Išmatavimai: Aukštis – 2,65 m Plotis – 1,25 m Gylis – 0,95 m Sandėlio numeris: 0545

Sąlyga: naudotas, Gamybos metai: 2011, Darbo plotas 500x300 mm Galia 60 W Svoris 100 kg CO2 pjaustymo ir graviravimo lazeris WINTER LASERMAX 5030-60W - Pagaminimo metai 2011 - Funkcionalumo patikra atlikta - Darbo plotas X, Y: 500 x 300 mm - Elektriškai reguliuojamas darbinis stalas iki 150 mm aukščio Guodexq Hikspfx Abmjk - CO2 lazerio galia: 60 W - Graviravimo greitis: 0-900 mm/s - Pjovimo greitis: 0-400 mm/s - Pakartojamumo tikslumas / rezoliucija: ±0,01 mm / 1000 dpi - Min. šrifto dydis: 1 mm - Linijiniai kreiptuvai X ir Y ašyse - X, Y pavaros su aukšto tikslumo diržine pavara per žingsninius variklius - Operacinės sistemos: Windows 98, Windows XP, Vista, Windows 7 - Valdymas LCD ekranu - USB sąsaja su 128 MB darbine atmintimi - Maksimali galia: 1000 W - Suderinami formatai: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Elektros prijungimas: 230 V, 50/60 Hz - 1 metų garantija lazeriui - Lazerio vamzdžio tarnavimo laikas apie 10 000 val. - Pjovimo gylis priklauso nuo medžiagos - Tinka medžiui, keramikai, stiklui ir plastikui - Svoris 100 kg

Gamybos metai: 2021, veikimo valandos: 19 829 h, Sąlyga: paruoštas naudoti (naudotas), Bendrieji duomenys Matmenys plotis: 10 140 mm Matmenys gylis: 2 860 mm Matmenys aukštis: 2 430 mm Mašinos svoris: 9 100 kg Valdymo blokas Gamintojas: AMADA Modelis: AMNC3i Gsdpfsx D Ny Eex Abmeuk Pagrindinė pavara Lazerio galia: 6,3 kW Judesiai X ašies eiga: 3 070 mm Y ašies eiga: 1 550 mm Maksimali medžiagos storis Plienas: 25 mm Nerūdijantis plienas: 25 mm Aliuminis: 25 mm Terapija Energijos suvartojimas: 20,4 kVA Ši AMADA ENSIS-3015 AJ pluoštinio lazerio pjovimo staklė pagaminta 2021 m. Prancūzijoje ir turi 19 829 darbo valandas, iš kurių 8 457 valandos - pjovimo režimu. Įrengta AMADA AMNC3i valdymo blokas. Lazerio galia – 6,3 kW. Taikymo sritys Suvirinimas

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3500 x 2100 x 1300 mm Total power requirement: 1500 kW Weight: 1200 kg Guedsv Uch Uopfx Abmsk CO2 Cutting and Engraving Laser WINTER LASERMAX KRS 1325-150W - Working area X, Y: 1300 x 2500 mm - Automatic height adjustment: 50 mm - CO2 laser power: 150 W - Engraving speed: 0–1000 mm/s - Cutting speed: 0–600 mm/s - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - Drive system (X & Y axes): Ball screw driven by servo motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely definable zero point on the worktable allows flexible working and easy positioning - Maximum power consumption: 1500 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, laser tubes with a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Active water cooling for stable operation and extended laser tube lifespan - Includes 135 W compressor - Includes 550 W exhaust blower - Suitable for wood, ceramics, glass, and plastic - Dimensions: L=3500 mm, W=2100 mm, H=1300 mm - Weight: 1200 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2015, Šis KOVACO SP 50 DP buvo pagamintas 2015 m. Jis pasižymi tvirtu suvirinimo pozicionieriumi su 1200x1800 mm stalu ir 5000 kg keliamąja galia. Eigos ilgis siekia iki 1200 mm, o pasvirimo kampas yra nuo 0 iki 90 laipsnių, su visiška stalo rotacija nuo 0 iki 360 laipsnių. Pasinaudokite proga įsigyti šį KOVACO SP 50 DP suvirinimo robotą. Susisiekite su mumis dėl daugiau informacijos apie šį įrenginį. Gusdjx D N A Hopfx Abmek Pritaikymo tipas: Suvirinimas

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 3500 x 2100 x 1300 mm Total power requirement: 0 kW Weight: 1200 kg CO2 Cutting and Engraving Laser WINTER LASERMAX KRS 1325-500W - Working area X, Y: 1300 x 2500 mm - Automatic height adjustment: 50 mm - CO2 laser power: 500 W - Engraving speed: 0-1000 mm/s - Cutting speed: 0-600 mm/s - Repeat accuracy / Resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - Drive system (X & Y axes): ball screw via servo motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB RAM - Red positioning laser for reduced setup times - Freely definable origin on the work area for flexible working and easy positioning - Supported formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines include a 1-year warranty, laser tubes 10 months - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Material support: aluminium slats - Active water cooling for stable laser system operation and long tube service life - Including compressor (power: 135 W) - Including exhaust fan (550 W) - Suitable for wood, ceramics, glass, and plastics - Dimensions: L = 3500 mm, W = 2100 mm, H = 1300 mm - Weight: 1200 kg Guodpfx Ajv Uch Iebmjk OPTION: - Honeycomb table EUR 600,-

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 2900 x 1800 x 1100 mm Total power requirement: 0 kW Weight: 550 kg CO2 Cutting and Engraving Laser WINTER LASERMAX ZRA 1325-300W - Working area X, Y: 1300 x 2500 mm - CO2 laser power: 300 W - Engraving speed: 0–1000 mm/s - Cutting speed: 0–600 mm/s - Repeatability / resolution: ±0.01 mm / 1000 dpi - Min. font size: 1 mm - Linear guides on X and Y axes - Drive system (X & Y axes): Rack and pinion drive via stepper motors - Supported operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely positionable origin on the work surface for flexible operation and easy positioning - Compatible file formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) Guodpfsv Uchzsx Abmjk - Electrical connection: 230 V, 50/60 Hz - Our laser machines have a 1-year warranty, laser tubes have a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Material support: aluminum slats - Active water cooling system for stable laser operation and long tube life - Includes compressor (135 W) - Includes exhaust fan (550 W) - Suitable for wood, ceramics, glass, and plastics - Dimensions: L=2900, W=1800, H=1100 mm - Weight: 550 kg OPTION: - Honeycomb table EUR 600,-

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2900 x 1800 x 1100 mm Total Power Requirement: 1.5 kW Weight: 550 kg CO2 Cutting and Engraving Laser WINTER LASERMAX RA 1325-150W - Working area X, Y: 1300 x 2500 mm - CO2 Laser Power: 150 W - Engraving Speed: 0–1000 mm/s - Cutting Speed: 0–600 mm/s - Repeatability / Resolution: ±0.01 mm / 1000 dpi - Minimum Font Size: 1 mm - Linear guides on X and Y axes - X, Y drive via high-precision belt drive with stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely definable zero point on the work surface for flexible operation and easy positioning - Maximum power consumption: 1500 W - Supported formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, and laser tubes with a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Material support: aluminum slats - Active water cooling for stable laser system operation and long tube service life - Including compressor (135 W) Godpfsv Uchusx Abmeuk - Including exhaust fan (550 W) - Suitable for wood, ceramics, glass, and plastics - Dimensions: L=2900, W=1800, H=1100 mm - Weight: 550 kg OPTION: - Honeycomb table EUR 600.-

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 1328 x 1070 x 530 mm Weight: 220 kg Total Power Requirement: 2.3 kW CO2 Cutting and Engraving Laser WINTER LASERMAX MIRA 9 9060-100 - Certified as Laser Class 1 in closed operation - Working area X, Y: 900 x 460 mm - Electrically height-adjustable worktable up to 150 mm - CO2 laser peak power: 100 W - Maximum speed: 800 mm/s - Maximum engraving speed: 1200 mm/s - Repeat accuracy: ±0.01 mm - Minimum font size: 1 mm - Linear guides in X and Y axes - Material supports: aluminum slats and honeycomb table included - X and Y drive with high-precision toothed belt drive via stepper motors - Operating systems: from Windows 7 onwards - Control via LCD display - Ruida controller RD6445 with 128 MB memory - Interfaces: USB, WIFI, RJ45 Gedpfxev Dmr Ao Abmouk - Red positioning laser to reduce setup times - Freely definable zero point on the work surface for flexible operation and easy positioning - Integrated autofocus for quick setup of the working height - Power consumption: 2300W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 15 mm) - Standard lens focus: 63.5 mm (2.5''), optional focus 50.8 mm (2.0'') / focus 101.6 mm (4.0'') - Active water cooling integrated for stable operation of the laser system and long tube life - Extraction fan with 500W power integrated - Compressor with 85 W power integrated - Including stand feet - Suitable for wood, ceramics, glass, and plastics - Dimensions L=1328 mm, W=1070 mm, H=530 mm - Net weight: 220 kg

Sąlyga: naudotas, Gamybos metai: 2018, Dimensions (L/W/H): 2200x1350x1150 mm Weight: 500 kg Total power requirement: 1 kW CO2 Cutting and Engraving Laser WINTER LASERMAX MAXI 1390-150W - Year of manufacture: 2018 - function tested, excellent condition - Working area X, Y: 1300 x 900 mm Gsdpfx Abov Dmrpomjuk - Electrically adjustable work table, height up to 200 mm - CO2 laser power: 150 W - Engraving speed: 0-1200 mm/s - Cutting speed: 0-600 mm/s - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - X, Y drive via high-precision toothed belt with stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8 - Control via LCD display - USB interface with 128 MB working memory - Red positioning laser to reduce setup times - Freely definable origin on the worktable for flexible operation and easy positioning - Maximum power consumption: 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Cutting depth depends on material (cutting capacity for acrylic approx. 20 mm) - Front and rear openings for feeding through longer workpieces - Active water cooling CHILLER 5000 for stable laser system operation and long tube life - Rotary attachment for engraving cylindrical and round objects up to Ø 120 mm and 400 mm length, 3-jaw chuck for components up to 50 mm diameter - Suitable for wood, ceramics, glass, and plastic - Dimensions: L=1900, W=1350, H=1100 mm - Packaging dimensions: L=2200, W=1350, H=1150 mm - Weight: 500 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 560 x 445 mm Weight: 40 kg Total Power Requirement: 1 kW CO2 Cutting and Engraving Laser LASERMAX 3021 - Working area X, Y: 300 x 210 mm - Worktable with electric height adjustment - CO2 laser power: 40 W - Engraving speed: 0–36,000 mm/min - Cutting speed: 0–30,000 mm/min - Repeatability / Resolution: ±0.05 mm / 1000 dpi - Minimum font size: 3 mm - Linear guides on X and Y axes - X, Y drive via high-precision belt drive and stepper motors Gujdpovz Hqasfx Abmsk - Control via LCD display - Software: RDWorks (from Windows 7) - USB interface with 128 MB RAM - Water cooling (submersible pump DK 4000) ensures stable laser system operation and long laser tube lifespan - Freely definable origin on the work area for flexible operation and easy positioning - Power consumption max. 1000 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50 Hz - Our laser machines come with a 1-year warranty and a 10-month warranty on the laser tube - Cutting depth depends on material (Acrylic 6 mm, Wood 4 mm, MDF 2 mm) - Suitable for wood, ceramics, glass, and plastics - Including extraction fan - Including compressor - Including submersible pump - Including electric worktable height adjustment - Dimensions: L = 800 mm, W = 560 mm, H = 445 mm - Weight: 40 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 2040 x 1495 x 1025 mm Weight: 540 kg Total Power Requirement: 2.3 kW CO2 Cutting and Engraving Laser LASERMAX NOVA ELITE 1490-150W - Certified to laser class 1 in closed operation - Working area X, Y: 1400 x 900 mm - Electrically adjustable worktable height up to 200 mm - CO2 laser peak power: 150 W - Maximum speed: 1200 mm/s - Maximum engraving speed: 800 mm/s - Repeatability: ±0.02 mm - Minimum font size: 1 mm - Linear guides on the X and Y axes - Material support: Aluminum slats and honeycomb table included - X, Y drive: High-precision belt drive with stepper motors - Operating systems: from Windows 7 upwards - Control via LCD display - Ruida RD6445 control unit with 128 MB RAM - Interfaces: USB, WIFI, RJ45 - Red positioning laser for reduced setup times - Freely definable origin (zero point) on the working surface for flexible operation and easy positioning - Integrated autofocus for fast setup of working height - Power consumption: 2300 W - Compatible file formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz Gusdpsvz Hpvjfx Abmek - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting capacity in acrylic approx. 15 mm) - Standard lens focus: 63.5 mm (2.5”), optional focus: 50.8 mm (2.0”) / 101.6 mm (4.0”) - Openings at the front and rear for processing longer workpieces - Active water cooling integrated for stable operation of the laser system and long service life of the laser tube - Integrated extraction fan, 500 W - Integrated compressor, 135 W - Includes castors with brakes and leveling feet - Suitable for wood, ceramics, glass, and plastics - Unit dimensions: L = 1920, W = 1600, H = 1100 mm - Packaging dimensions: L = 2040, W = 1495, H = 1025 mm - Net weight: 540 kg - Shipping weight: 570 kg Option: - Rotary device with rollers for engraving cylindrical and conical objects - Rotary device with 3-jaw chuck for engraving cylindrical objects

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 2200 x 1340 x 1050 mm Weight: 640 kg Total power requirement: 1.3 kW CO2 Cutting and Engraving Laser LASERMAX MAXI 1610-80W SINGLE - Working area X, Y: 1600 x 1000 mm - Chain conveyor belt for leather and textiles - Roll holder / unwinding device - Collection net at the front - CO2 laser power: 80 W - Engraving speed: 0–6000 mm/min - Cutting speed: 0–1000 mm/min - Repeatability / resolution: ±0.01 mm / 1000 dpi - Minimum font size: 1 mm - Linear guides on X and Y axes - X, Y drive with high-precision toothed belt via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB working memory - Red positioning laser for reduced setup times - Freely definable zero point on the working surface for flexible operation and easy positioning - Control system: DSP - Machine software: RDWORKS - Compatible software: CorelDraw, AutoCAD, Photoshop - Power consumption: max. 1300 W Gsdpfxjvz Hnxo Abmeuk - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, and the laser tubes carry a 10-month warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 25 mm) - Active water cooling for stable laser system operation and long service life of the laser tube - Also suitable for wood, ceramics, glass and plastic - Dimensions: L=2200 mm, W=1340 mm, H=1050 mm - Weight: 640 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 960 x 900 x 1460 mm Weight: 100 kg Total power requirement: 2 kW Godpjvz Hm Uofx Abmouk Fibre Laser Marking Machine LASERMAX FL-20 FLEXI - Working area: 200 x 200 mm / 300 x 300 mm - Wavelength: 1064 nm - Laser source: 20W Raycus - Repetition frequency: 20–60 kHz - Marking line width

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height) 2200x1340x1050 mm Weight 640 kg Guedevz Hk Hopfx Abmek Total Power Requirement 1.3 kW CO2 Cutting and Engraving Laser LASERMAX MAXI 1610-80W DUAL - Working area X, Y: 1600 x 1000 mm - Conveyor belt for leather and textile - Roll holder / unwinding device - Collection net at the front - CO2 laser power: 80 W - Engraving speed: 0-6000 mm/min - Cutting speed: 0-1000 mm/min - Repeat accuracy / resolution: ±0.01 mm / 1000 dpi - Min. font size: 1 mm - Linear guides in X and Y axes - Drive X, Y with high-precision belt drive via stepper motors - Operating systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10 - Control via LCD display - USB interface with 128 MB memory - Red positioning laser for reduced setup times - Freely definable zero point on the working surface for flexible operation and easy positioning - Control System: DSP - Machine software: RDWORKS - Compatible software: CorelDraw, AutoCAD, Photoshop - Power consumption max. 1300 W - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty, and 10 months on laser tubes - Cutting depth depends on material (cutting performance for acrylic approx. 25 mm) - Active water cooling for stable operation of the laser system and extended service life of the laser tube - Also suitable for wood, ceramics, glass, and plastics - Dimensions L=2200, W=1340, H=1050 mm - Weight 640 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2120 x 1585 x 1025 mm Weight: 560 kg Total power requirement: 2.3 kW CO2 Cutting and Engraving Laser LASERMAX NOVA ELITE 1610-150W - Certified as Laser Class 1 during closed operation - Working area X, Y: 1600 x 1000 mm - Worktable electrically height-adjustable up to 200 mm - CO2 laser peak power: 150 W - Max. speed: 1200 mm/s - Max. engraving speed: 800 mm/s Gujdpfxovz Hiis Abmok - Repeatability: ±0.02 mm - Minimum font size: 1 mm - Linear guides on X and Y axes - Material bed: aluminium slats and honeycomb table included - X and Y drive via high-precision toothed belt system with stepper motors - Operating systems: from Windows 7 onwards - Control via LCD display - Ruida controller RD6445 with 128 MB RAM - Interfaces: USB, WIFI, RJ45 - Red positioning laser to reduce setup times - Freely definable origin on the work surface for flexible operation and easy positioning - Integrated autofocus for quick setup of working height - Power consumption: 2300 W - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (AutoCAD, CorelDraw) - Electrical connection: 230 V, 50/60 Hz - Our laser machines come with a 1-year warranty - Cutting depth depends on material (cutting capacity for acrylic approx. 15 mm) - Standard lens focus 63.5 mm (2.5”), optional focus 50.8 mm (2.0”) / focus 101.6 mm (4.0”) - Pass-through openings on the front and rear for processing long workpieces - Active water cooling system integrated for stable laser performance and long tube service life - Integrated exhaust fan, power: 500 W - Integrated compressor, power: 135 W - Includes castors with brake and leveling feet - Suitable for wood, ceramics, glass, and plastics - Dimensions: L=2120, W=1585, H=1025 mm - Packaging dimensions: L=2200, W=1700, H=1240 mm - Net weight: 560 kg - Shipping weight: 600 kg Options: - Rotary attachment for engraving cylindrical and conical objects with rollers - Rotary attachment for engraving cylindrical objects with 3-jaw chuck

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1400 x 1100 x 1300 mm Weight: 200 kg Total Power Requirement: 1 kW CO2 Engraving Laser LASERMAX OS-200 - Marking Area: 200 x 200 mm - CO2 Laser Power: 30 W (metal laser tube, extremely fine lines) - Laser Tube Lifetime: approx. 10,000 hours - Laser Warranty: 1 year Guedpfx Aevz Hicebmsk - Wavelength: 1064 nm - Marking Depth: 0.02 mm - 1 mm (depending on material) - Very high marking speed due to oscillating mirrors - Marking line speed: up to 7000 mm/s - Minimum line width: 0.01 mm - Minimum character size: 0.2 mm (metal), 1 mm (glass) - Repeat accuracy: ± 0.002 mm - Machine power: up to 1.0 kW - Voltage: AC / 220V / 50Hz - Freely definable zero point on the work surface for flexible operation and easy positioning - Software pre-installed on PC - Industrial PC with Windows 7 and LED monitor - Compatible formats: BMP, HPGL (PLT), DXF, G-CODE, DST, AI (Autocad, CorelDraw) - Active water cooling (chiller) for stable laser system operation and increased laser tube lifespan - Suitable for wood, ceramics, glass, and plastic - Dimensions: L=1400, W=1100, H=1300 mm - Weight: 200 kg