Priedai ir atsarginės dalys kompresoriams pirkti naudotą (33)

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Informacija: Gamintojas: KAESER Prekė: Alyvos separatoriaus kasetė / Oil Separator Cartridge Dalies numeris: 6.2013.0 Dydis: Ø 275 x 462 mm Būklė: Nauja, originalioje pakuotėje (OVP) Kiekis: Yra 2 vienetai Pritaikymas: Skirta KAESER sraigtiniams kompresoriams Techninei priežiūrai / Servisui / Atsarginė dalis Lrsdpfjy E Rxnex Acpek Privalumai: Originali KAESER atsarginė dalis Prieinama iš karto Idealiai tinka sandėliavimui arba priežiūrai

Gamybos metai: 2026, būklė: naujas, A refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. The main structural components include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. By utilizing a counterflow configuration, heat recovery increases the overall system’s energy efficiency. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to the dew point temperature of 3°C. This results in the condensation of contained water vapor and oil particles. Lrjdpfx Acomt Dcxopek 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of the cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Max. working pressure: 10 bar Max. inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 7,000 l/min Power: 1.37 kW Supply voltage: 230 V Dimensions (L x W x H): 1000 x 550 x 920 mm Weight: 95 kg Type and amount of refrigerant: R410a, 900 g

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsations within the system, ensure optimal compressor operation, partially remove moisture and oil from compressed air, and create an air reserve. Technical specification of the 1000L pressure vessel The compressed air pressure vessel is a cylindrical pressure device comprised of two ellipsoidal end caps, a shell with nozzles, and valves. Its primary function is to dampen pulsations in the compressed air system, contributing to optimal compressor operation and assisting in the removal of moisture and oil from compressed air. High-quality pressure vessels are especially suitable for demanding working conditions. Our 1000-liter, 11 bar pressure vessel is a robust and capacious unit, ideal for storing compressed air and other gases under high pressure. It is engineered to withstand high pressures and ensure safe gas storage. This tank is used in a variety of sectors, including industry, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air generation equipment, providing a reliable gas source for production processes and utility applications. With its 1000-liter capacity, this vessel allows for longer operating periods without frequent refilling. The 11 bar working pressure ensures the vessel can safely contain gas at high pressure, which is particularly advantageous for power-intensive applications. Ledev Axzmopfx Acpjrk Our 11 bar, 1000L pressure vessel is manufactured from high-quality materials, guaranteeing durability and safety. It is equipped with appropriate valves and safety features to prevent leaks and maintain safe pressure levels. Furthermore, our tank is supplied with complete documentation, technical passports, certificates, and attestations, including information about materials used in the manufacturing process. It has undergone inspection by a Notified Body of the Office of Technical Inspection and is marked with a nameplate containing the CE mark and the Notified Body number (UDT). In summary, the 1000-liter, 11 bar pressure vessel is a reliable unit that enables the storage of compressed air or other gases under high pressure. Its versatility makes it a dependable gas source for a wide range of industrial and utility applications. Our offer includes a broad selection of pressure vessels with various capacities, making it easy to match the model to specific installation requirements. Our tanks are made from high-strength, pressure-resistant steel and coated with specially prepared paint both inside and outside. Vertical and horizontal installation models are available for flexible integration into varied settings. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg): 230.00 Connections: 8 Connection sizes: 1/2", 2" Dimensions: 222.7 x 85 cm Tank capacity (l): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Advantages of the 500 L Pressure Vessel - Professional pressure-rated design – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Working pressure up to 11 bar – suitable for most pneumatic systems, including those with increased demands. - High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces compressor start-up frequency. - Multi-connection inlet system – 6 ports with diameters of 1.1/4", 2", and 1/2" provide flexible integration with various installations. - Superior finish – durable anti-corrosive coating applied both inside and outside the tank. - Universal installation orientation – vertical construction optimizes space usage within the facility. Lrsdpfxsxbzbpe Acpsk Construction and Technology – Robust Design for Demanding Applications This compressed air vessel has been engineered for intensive use in industrial environments. The body is manufactured from structural steel with a wall thickness of 4 mm, ensuring resistance to pressures up to 11 bar and guaranteeing long service life. All welds undergo rigorous quality checks, while the tank surfaces are protected with anti-corrosive paint resistant to chemical and environmental factors. The vessel is fitted with a nameplate featuring the CE mark and a UDT notified body number, confirming its approval for use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE mark - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosive coating

Būklė: naujas, Gamybos metai: 2026, COMPRESSED AIR TANK 270 L – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel - Professional-grade pressure design – manufactured from premium-grade, 4 mm thick steel, providing resistance to both pressure and corrosion. - UDT Certification and CE marking – compliant with European safety and quality standards. - Working pressure: 11 bar – suitable for most pneumatic systems, including those with higher performance requirements. - High capacity – 270 litres – enables stable air supply for pneumatic installations and reduces compressor start frequency. - Multi-connection system – 5 ports with diameters of 1", 2", and 1/2" enable flexible integration into various systems. - Superior workmanship – durable anti-corrosive coating applied both internally and externally. - Universal installation position – vertical design saves workspace in industrial settings. Construction & Technology – Robust Build for Demanding Applications This compressed air tank is engineered for intensive use in industrial environments. The body is constructed from structural steel with a 4 mm wall thickness, ensuring resistance to working pressures up to 11 bar and long-term durability. All welds undergo stringent quality control, and the tank surfaces are protected with a chemical- and weather-resistant anti-corrosion coating. Lredpjxbzaljfx Acpjk The tank comes equipped with a nameplate featuring the CE mark and UDT notified body number, authorizing its use on the Polish and European markets. The package includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 5 pieces – diameters 1", 2", and 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airstream. Refrigeration dryers are essential in applications where moist air could lead to corrosion, contamination, or damage of tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer is engineered for maximum efficiency and durability. Main construction elements include: 1. Air-to-air heat exchanger In the first stage, inlet air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to counterflow configuration, heat recovery improves the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point of 3°C. This causes contained water vapor and oil particles to condense. 3. Condensate separator After cooling, the gas-condensate mixture enters a high-efficiency separator, where condensate is separated and automatically discharged from the unit. 4. Fan operation control system Variable-speed fan technology allows the cooling intensity to intelligently adapt to actual demand, reducing energy consumption and increasing the lifespan of the components. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Ledpfxsmt Dcqj Acpjrk Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 59 kg Refrigerant type and quantity: R410a, 650 g

Būklė: naujas, Gamybos metai: 2026, AIR RECEIVER 500 L – HIGH-GRADE PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel - Professional pressure vessel construction – made from premium-grade 4 mm thick steel, offering resistance to pressure and corrosion. - UDT certification and CE marking – compliance with European safety and quality standards. - Working pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Lrodpfxsxby D Aj Acpok - High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces compressor cycling frequency. - Multi-connection system – six connection ports (diameters: 1.1/4", 2", 1/2") allow for versatile integration into various systems. - High-quality craftsmanship – durable anti-corrosion coating applied both internally and externally. - Universal mounting position – vertical design ensures space-saving installation in industrial environments. Design & Technology – Robust Construction for Demanding Applications This compressed air receiver is engineered for intensive use in industrial environments. The body is made of structural steel with 4 mm wall thickness, guaranteeing resistance to operating pressures up to 11 bar and ensuring long service life. All welds undergo stringent quality control, and the vessel's surfaces are protected with a chemical- and weather-resistant anti-corrosion coating. The tank comes equipped with a nameplate bearing the CE mark and UDT notified body number, confirming its approval for use in the Polish and European markets. The delivery includes full technical documentation, a vessel passport, and material certificates. Precision & Work Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-liter capacity, the receiver acts as an air buffer, stabilizing pressure throughout the pneumatic system. This allows for consistent operation of air-powered equipment and significantly extends compressor lifespan by reducing the number of start/stop cycles. The vertical configuration enables compact installation, which is especially important in facilities with limited space. A suitably matched tank for the compressor minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE Mark - UDT Notified Body Number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Gamybos metai: 2026, būklė: naujas, The compressed air refrigeration dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration air dryers are essential in applications where moist air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. The main construction elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. The use of a counterflow system recovers heat, enhancing the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air enters the evaporator, where it is further cooled down to a 3°C dew point. This results in the condensation of the contained water vapour and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture flows into an efficient separator, where the condensate is separated and automatically discharged outside the unit. 4. Fan speed control system The variable-speed fan technology enables intelligent adjustment of cooling intensity to actual demand, which reduces energy consumption and increases component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1" Maximum operating pressure: 10 bar Lsdpfxjmt Dbhj Acpork Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Type and amount of refrigerant: R134a, 400 g The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for the full list of offers.

Gamybos metai: 2026, būklė: naujas, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By eliminating moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerated dryer is engineered for maximum efficiency and longevity. The main design components include: Lredpfxemt Dcfo Acpek 1. Air-to-air heat exchanger In the first stage of the process, inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air exiting the evaporator. Thanks to the use of counter-flow, heat recovery increases the overall energy efficiency of the system. 2. Refrigeration system evaporator In the second stage, the compressed air enters the evaporator, where it is chilled to a 3°C dew point. This causes condensation of water vapor and oil particles present in the air. 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where the condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable speed fan technology allows the cooling intensity to be intelligently adjusted to actual demand, reducing energy consumption and extending component life. Technical Specifications Inlet/outlet pipe diameter (BSP): 1" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and quantity of refrigerant: R134a, 550 g

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 200 L AIR RECEIVER – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air installation. With its optimized design and high pressure resistance, this tank can serve as both a storage buffer and a stabilizing element for compressor operation parameters. Key advantages of the 200 L pressure vessel: - Professional pressure-rated construction – manufactured from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – full compliance with European safety and quality standards. Lrodjxbzd Repfx Acpsk - 11 bar working pressure – supports most pneumatic systems, including those with higher performance demands. - High capacity – 200 litres – ensures stable pneumatic installation supply and reduces compressor cycling frequency. - Multi-port connection system – six ports with diameters of 1/2", 1", and 2" enable flexible integration into various systems. - Superior build quality – durable anti-corrosion coating inside and out. - Universal installation orientation – vertical design saves space in industrial environments. Technical specifications: - Weight (kg): 80 - Connections: 6 - Connection size: 1/2", 1", 2" - Dimensions: 166.5x45 cm - Tank capacity (L): 200 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 450 - Height (mm): 1665 Standard equipment: - Connection ports: 6 pcs – diameters 1/2", 1", 2" - Nameplate with CE mark - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Būklė: naujas, Gamybos metai: 2026, Set of filters essential for oil changes in CORMAK screw compressors – compatible with the following models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15 -10. The oil filter is necessary to maintain the cleanliness of the lubricating oil circulating within the system. It removes contaminants and metal particles resulting from normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the service life of the oil separator. Purpose: Removing contaminants from lubricating and cooling oil. Benefits: Protects bearings and screw components, reduces friction and overheating, extends oil service life. The air filter is the first line of defense for your compressor. It effectively traps solid particles, dust, and environmental contaminants before they reach the screw block. Using a clean air filter prevents wear of compression elements and minimizes the risk of oil contamination and impurities in the delivered compressed air. Purpose: Protects the screw block and rest of the system from environmental contaminants. Benefits: Prolonged compressor lifespan, maintained performance, reduced energy consumption. The oil separator filter (separator) is a key component in oil-lubricated compressors, designed to separate oil droplets from the compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and manufacturing processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by efficiently separating oil mist. Lsdpfjycf Nuox Acpjrk Benefits: Low operational costs (reduced oil consumption), no contamination of the pneumatic system, maintained stable pressure. Why Choose Our Filters? Complete Compatibility: Our filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter materials with large surface area and precise micron rating. Optimal Price: We offer high quality at a competitive price, providing a cost-effective alternative to original parts. Take care of your CORMAK compressor today!

Būklė: naujas, Gamybos metai: 2026, Set of essential filters for oil change in CORMAK screw compressors – model: LUFT 400 The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating in the system. It removes contaminants and metal particles generated due to normal wear and tear. Clean oil ensures proper lubrication and cooling of moving parts, as well as extending the life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduction of friction and overheating, longer oil lifespan. Lrodpeycf Iqefx Acpjk The air filter is the first line of defense for your compressor. It effectively traps solid particles, dust, and environmental pollutants before they enter the screw block. Using a clean air filter prevents abrasion of compression components and minimizes the risk of oil and finished compressed air contamination. Purpose: Protection of the screw block and the rest of the system against environmental contaminants. Benefits: Increased compressor lifespan, maintained performance, reduced energy consumption. The oil separator filter (separator) is a key component of an oil-injected compressor designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for the protection of pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (lower oil consumption), no contamination of pneumatic installations, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter media with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Būklė: naujas, Gamybos metai: 2026, Set of filters essential for oil changes in CORMAK screw compressors – compatible with the following models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10. The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating within the system. It removes contaminants and metal particles generated by normal wear and tear. Clean oil ensures proper lubrication and cooling of moving parts and extends the life of the oil separator. Purpose: Removal of contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduction of friction and overheating, longer oil service life. The air filter is the first line of defense for your compressor. It effectively traps solid particles, dust, and environmental contaminants before they enter the screw block. Using a clean air filter prevents abrasion of compression components and minimizes the risk of contamination of both the oil and final compressed air. Purpose: Protecting the screw block and the entire system from external contaminants. Benefits: Increased compressor lifespan, maintained performance, and reduced energy consumption. Lodpsycf Hmsfx Acpsrk The oil separator filter (separator) is a key component in oil-injected compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in outgoing air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by efficient separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of pneumatic systems, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Pricing: We offer high quality at a competitive price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Būklė: naujas, Gamybos metai: 2026, Set of essential filters for oil changes in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10. Lredpfx Acoycf D Sepek The oil filter is indispensable for maintaining the cleanliness of lubricating oil circulating in the system. It removes contaminants and metal particles generated by normal wear and tear. Clean oil ensures proper lubrication and cooling of moving parts, as well as extending the service life of the oil separator. Purpose: Removing contaminants from lubricating and cooling oil. Benefits: Protection of bearings and screw elements, reduced friction and overheating, extended oil lifespan. The air filter is the first line of defense for your compressor. It efficiently traps solid particles, dust, and airborne contaminants before they reach the screw block. Using a clean air filter prevents wear of the compression components and minimizes the risk of oil and compressed air contamination. Purpose: Protecting the screw block and the rest of the system from environmental contaminants. Benefits: Increased compressor lifespan, maintained efficiency, lower energy consumption. The oil separator filter (separator) is a key component of oil-injected compressors, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Complete Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filter media with large surface area and precise micron ratings. Optimal Price: We provide high quality at a competitive price, offering a cost-effective alternative to original parts. Take care of your CORMAK compressor today!

Būklė: naudotas, Naujas suspausto oro šaldymo džiovintuvas, neišpakuotas oro džiovintuvas iš sandėlio atsargų Oro sausintuvas SMC tipo IDFA3E-23 Lrjdeyif I Uepfx Acpok Suspausto oro džiovintuvas, presuoto oro sausintuvas Gamyklos Nr. PP0213S Pagaminimo metai 2011 SMC IDFA oro džiovintuvas, dydis 3E Našumas per valandą: 12000 litrų/val. (12 m³/val.) Našumas per minutę: 200 litrų/min. Darbinis slėgis maksimalus 10 bar Darbinis slėgis 0,15 – 1,0 MPa (pagal gamintoją) Šaltnešis: R134a Temperatūros diapazonas: 5°C – 50°C Galingumas: 180 W Elektros jungtis: 230 V, 50 Hz, 1,2 A Jungties srieginis pajungimas: 3/8" - Nerūdijančio plieno šilumokaitis, oru aušinamas kondensatorius - Kondensato atskirtuvas su automatiniu išleidimu - Kondensato išleidimas per žarną Matmenys (I x P x A): 410 x 226 x 473 mm Svoris: 18 kg Naujas ir nenaudotas, kaip naujas – sandėlio būsena

Būklė: naujas, Parduodamos SIAD kompresoriaus atsarginės dalys iš sandėlio likučių, tokios kaip: siurbimo vožtuvas 137 DEA 8, siurbimo vožtuvas 78 RL su pakėlėju, slėgio vožtuvas 137 DEA 8 plieninių plokštelių versija, siurbimo vožtuvas 82 DEA 4 su pakėlėju. Galimi keli vienetai. Lredpfx Acoyl S Hrspek

Būklė: naudotas, Spare parts package comprising various spare parts and filters for compressors and refrigerated dryers from the manufacturers BOGE, MATTEI, and BEKO. Individual spare parts from the package can also be offered upon request. Ledpfxeqapixo Acpork Detailed photos can be provided.

Gamybos metai: 2012, būklė: naujas, mašinos/transporto priemonės numeris: 201403250027, For sale: Two-stage high-pressure screw drill compressor – Sullair 20/12. We have several units available. These screw elements are suitable for Sandvik drilling rigs. Brand new units. Specifications: Model: 20/12 Series 1500 Capacity (cfm): 1500 Speed: 2100 rpm Rated pressure (psig): 350 Approximate weight (kg): 1066 Dimensions (L x W x H): 120 x 91 x 106 cm (47" x 34.8" x 42") As this model is most popular in the USA, we can deliver to Chicago at our expense. Lodpeilqphsfx Acperk If interested, please feel free to contact me.

Būklė: geras (naudotas), Emulsion splitting unit oil-water separation system The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The treated water meets the legal requirements for discharge into the sewer system. Lodeb A Iy Hopfx Acpork -Weight: 70 kg

Būklė: naudotas, Suslėgto oro talpykla, oro bakas, slėginis indas KAESER Gamyklos Nr. 481127K Pagaminimo metai 2001 Talpyklos tūris 1000 litrų Darbinis slėgis 11 bar - karštai cinkuotas slėginis indas - 3 vnt. 2" srieginių jungčių - 2 vnt. 1 1/2" srieginių jungčių - 3 vnt. 1/2" srieginių jungčių Ljdpfx Acexpqzuspjrk - 2 mažos valymo angos - 3 rutuliniai vožtuvai - 1 viršslėgio vožtuvas - slėgio matuoklis - 2 kėlimo akys talpyklos viršuje Talpyklos skersmuo apie 800 mm Bendras aukštis 2300 mm su stovu (be priedų) Svoris 230 kg geros būklės

Būklė: naudotas, Filtravimo armatūra, DONALDSON ULTRAFILTER filtravimo vienetas, skirtas kompresorių sistemoms Dvigubas filtras, pakopinis filtras Nominalus srautas: 1440 m3/h = 24000 litrų/min. Korpuso dydis: 0072 Talpa: apie 5 litrus 1 vnt. su smulkiu filtro elementu (dydis 20/30) 1 vnt. su pirminiu filtro elementu (dydis 20/30) Darbinis slėgis: maks. 16 bar Prisukamas sriegis: G 2 1/2" Flanšinis pajungimas: DN 100 Flanšų montavimo plotis: 580 mm - Diferencinio slėgio manometras - Automatinis kondensato atskyriklis UFM T10, 230 V (0,11 l/min) - Filtro korpusas iš aliuminio Svoris: apie 35 kg Matmenys I x P x A: 1030 x 850 x 200 mm Gera būklė Yra 2 vnt. – po vieną kaip pirminis bei smulkus filtras. Galima naudoti kaip dvigubą arba pakopinį filtrą. Ledpfx Acjxf Uukoperk

Būklė: naujas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Oil separator cartridge 6.2010.0, original Kaeser spare part From clearance sale We are on company holiday until 06.01. Your inquiry will be processed afterwards. Lrjdpfevkfziox Acpek Warranty and returns are excluded for this listing.

Būklė: naujas, Atlas Copco ROTO Synthetic Fluid FOODGRADE, 20-liter container Also available in 5-liter containers From stock clearance Ljdpfx Acovkf A Hepsrk We are on company holiday until 06.01. Your inquiry will be processed afterwards. Warranty and returns are excluded for this listing.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Pilot line kit complete incl. fitting 403574.0 Original Kaeser spare part From stock clearance Lodpfjvkfw Rsx Acpsrk We are on company holidays until 06.01. Your inquiry will be processed thereafter. Warranty and returns are excluded for this listing.

Būklė: naujas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Air filter cartridge 6.4566.0 Original Kaeser spare part Ledevkfyxepfx Acpork Suitable for Kaeser compressors: M50, M36, M43, M45, M64, M52 From stock clearance We are on company holiday until 06.01. Your enquiry will be processed afterwards. Warranty and returns are excluded for this listing.