Daugiaašis staklės pirkti naudotą (225)

Sąlyga: naujas, Rear-side machining driven for MS52 pos. 6.4 / 6.5 Knodpsp S Sabofx Acuoc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 61 000 h, mašinos/transporto priemonės numeris: 04800000401, 04/02/25: Correction: This is a multi-spindle machine, not a vertical machine. Knjdpfxohv H Hye Acujc Sale only within the EU. Please submit your offer for the unit. ----- Technical data as per handout. Without packaging; any warranty rights are excluded. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or for compliance with any of the safety and environmental protection requirements stipulated in accident prevention regulations.

Sąlyga: naujas, Gamybos metai: 2005, Grinding spindle type: SFAA-K-200 x 450 - 140x700 Manufacturer: Spindellagerungstechnik Fraureuth GmbH Knjdpfxjvd Dkpe Acuoc Length: 700 mm In use, ordered as stock item.

Sąlyga: geras (naudotas), Gamybos metai: 1987, veikimo valandos: 800 h, Funkcionalumas: nepatikrintas, 1 pc. cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06, year of manufacture 1987, 8 spindles, max. dia. 51mm. Knjdpfx Acou Edp Seusc 1 pc. IEMCA PRA bar loader (interface available) 33 pcs. various cam sets included (see accessory list for details) 1 pc. Balluff Mini Controller BMC 1 pc. chip conveyor 10 pcs. various gear sets (see accessory list for details) 8 pcs. ø28mm round collets (see accessory list for details) Paintwork: light blue & light grey

Gamybos metai: 2018, veikimo valandos: 7 879 h, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8110000014B, A retrofit of the machine was carried out in 2021: - Replacement of bar feeder from Chucci to Iemca Next 25-33 - Control upgrade from Fanuc 30i-B to Fanuc 611 SL IV (Slim Line) - Addition of a valve block for hydraulic control of the coolant supply (equipped with 28 controllable high-pressure valves) - Installation of an electronic parts shuttle for workpiece unloading - Conversion to a tool breakage monitoring system: Artis / CTM program TECHNICAL DETAILS Bar capacity: 36 mm Number of main spindles: 6 Number of cross slides X-Y axes: 6 C axes: 6 Angular resolution: 0.002° Spindle speed: 7,500 rpm Rapid traverse: 40 m/min Spindle positioning: 0.1° Tool drive unit speed: max. 13,800 rpm MACHINE DETAILS Footprint: 21.9 sqm (with loader) Net weight (machine): 15 t Chip conveyor: included LUBRICATION DETAILS Oil tank capacity: 1,800 l Total oil volume: 2,000 l 6.3 bar: 140 l/min 45 bar: 100 l/min 80 bar: 50 l/min BAR FEEDER DETAILS Model: Iemca Next 42/33 Bar length: max. 3,300 mm Bar length: min. 2,400 mm Knodpfx Aemduh Eecuec Loading capacity as Magazine Loader: 450 mm Bar diameter: 4 – 36 mm Guide channels: 6 fixed + 6 movable (with spindle reduction tubes and bushings)

Sąlyga: geras (naudotas), Gamybos metai: 1997, padavimo ilgis X ašis: 70 mm, padavimo ilgis Z ašis: 140 mm, X ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 15 m/min, įvesties srovės tipas: trifazis, ašies skaičius: 6, veleno greitis (maks.): 5 000 aps./min, tvirtinimo įvorės skylė: 42 mm, Strypo skersmuo (maks.): 42 mm, galia: 72 kW (97,89 AG), bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, Шестишпинделен автоматичен CNC струг. Има две машини в добро състояние, като втората е произведена през 1996 г. Цената за двете машини е 64 000 евро. Knsdpfxjlp Nr Ao Acuec

Gamybos metai: 2002, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, 3 main spindles with 70 mm bar capacity FUNCTIONS The raw bar is machined in spindles 1 and 2 using a 12-position turret. At the same time, a 2-position frontal turret can operate on this spindle (for drilling or internal turning operations). After machining, the drum indexes. The pre-turned part is finish-machined and parted off/picked off in spindle 3 using a 12-position turret. Subsequently, the part is finish-machined in the counter-spindle and unloaded by the discharge gripper (monitoring included). The bar is fed forward and the drum indexes. TECHNICAL DETAILS Knsdpen Uum Hsfx Acujc Bar capacity: 70 mm Counter-spindle Tool turrets: 5 units, VDI30 (CNC cross-slide) High-pressure internal cooling: two turrets Measuring system: direct, high-resolution for all X-axes Control unit: Siemens 840 D Powerline Tool monitoring: Artis Collet chucks: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: rough turning Toolholder: 12-position turret Additional: 2-position frontal turret can be used Main spindle 2: finish turning Toolholder: 12-position turret Additional: 2-position frontal turret can be used Main spindle 3: finishing, parting off, and backworking Toolholder: 12-position turret EQUIPMENT Bar feeder for 1,500 mm bar lengths

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, 1 x multi-spindle automatic lathe Index MS 25 Year of manufacture: 1990 with bar feeder Ksdpfx Acju Hgdueusnc Iemca PRA 40/33 P Extensive accessories included. The machine can be inspected under power.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, We are offering a Kummer K90D, which is ideally suited for production operations. The machine is equipped with a loading and unloading gantry as well as a corresponding sorting tray. Kjdev Rpw Ispfx Acuenc

Sąlyga: naudotas, GILDEMEISTER GM35 AC MULTI-SPINDLE LATHE WITH PIETRO CUCCHI BAR LOADER We can offer the lathe and bar loader fully refurbished to like-new condition with CE certification. Knsdpfx Aewrpb Iocujc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Pietro Cucchi automatic bar feeder Second operation chuck Thread cutting attachment Spindle lock Ksdpfx Acewrz Hcsuonc Transverse machining units

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Number of spindles: 8 Spindle passage: 32 mm Item: cam-type multi-spindle lathe in secondary operation version with spindle stop Integrated part loading and unloading system Brand: Schütte Model: AF32 Dnt Kedsv E Hcdjpfx Acusnc Year of manufacture: 1999 Control electronics: Siemens Simodrive 611 Motors in Dnt version Scraper-type chip conveyor No. 2 drilling devices Electric cabinet air conditioner Set of quick-change tool holders Set of cams

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1999, SCHÜTTE SF 32S DNT MULTISPINDLE LATHE with KUKA ROBOT Used, in excellent condition and fully operational Available for any test at H.B.R. srl premises Condition: excellent (used) Year of manufacture: 1996 Functionality: fully operational Number of spindles: 6 Maximum spindle speed: 3,150 rpm Bar capacity: 32 mm TECHNICAL DETAILS Number of spindles: 6 Spindle speed range: 450 - 3150 rpm Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagon bar capacity: 27 mm Max. bar feed: 125 mm Max. long slide stroke: 100 mm Number of possible parts per cycle: 35 Machining rate: from 1.12 sec up to 125 sec Spindle speeds: Number (steps): 49, from 200 rpm up to 3150 rpm Machining time: from 0.63 sec up to 200 sec Voltage: 50 Hz 3x 380 Volt Power: 18.5 kW Ksdpfjvri Atox Acujnc MACHINE WEIGHT AND DIMENSIONS: Weight: approx. 8,000 kg Length: 3,850 mm Width: 1,390 mm Height: 2,200 mm Knoll AE 1114 High Pressure System: Year of manufacture: 2004 Filtration system Individually adjustable pumps at 5 bar and 40 bar for the machining process Plate heat exchanger Lift pump from chip conveyor Available for any type of test at H.B.R. srl - Calolziocorte (LC)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, MACHINE IN VERY GOOD CONDITION. SOLD WITH: 1 PICK-UP, 1 CHIP CONVEYOR AND A WIDE RANGE OF COLLETS. MANUAL INCLUDED. FOR SALE DUE TO RETIREMENT OF OPERATING PERSONNEL. Kedpfxjwn D R Ae Acuonc

Sąlyga: naudotas, Gamybos metai: 2024, INDEX MS22-8 Baujahr: 2024 2 NCU (4) Y-Achsen SL-Steuerung Schnittstunden: 1.000 Schlüsselfertige Übergabe möglich Standort: Europa 4-Meter IEMCA SIR MS22-8/43/P Magazinlader 50 Hz D9-13-19-25 Stangenlänge: 4.300 mm mit Bohraggregat und Minimalmengenschmierung zusätzlicher Reststangen-Sensor Stangenlagerung 500 mm (D12-D24) Stangenlagerung 340 mm (D5-D11) Zusätzliche Lagerkette für 22 Stangen mit Profinet-Schnittstelle 1 11007253 (21711) 1 Satz (8 Stück) Stangenschieber, audenseitige Spannzangen für Stangendurchmesser D7-D10 mm, innenseitige Spannzangen für Stangendurchmesser D13-D18 mm, bestehend aus: 8 Stangenschieber D12 8 Drehhülsen D12 1 10287026 (21712) 1 Satz (8 Stück) Stangenschieber, audenseitige Spannzangen für Stangendurchmesser D11-D16 mm, innenseitige Spannzangen für Stangendurchmesser D19-D24 mm, bestehend aus: 8 Stangenschieber D18 8 Drehhülsen D18 1 10536056 (21713) 1 Satz (8 Stück) Stangenschieber für Stangendurchmesser D17 mm–D22 mm, bestehend aus: 8 Stangenschieber D23 Knsdpfx Acjxnrtceuoc 8 Drehhülsen D23 1 10414481 (21702) 1 Satz (8 Stk.) innere Spannhülsen D12 mm für Stangendurchmesser D13 mm–D18 mm Bohrdurchmesser D8 mm 1 10472413 (21704) 1 Satz (8 Stk.) Außenspannanschläge D12 mm für Stangendurchmesser D13 mm–D18 mm vorgedreht 1 10264327 (21703) 1 Satz (8 Stk.) innere Spannhülsen D18 mm für Stangendurchmesser D19 mm–D24 mm Bohrdurchmesser D15 mm 1 10058206 (21705) 1 Satz (8 Stk.) Außenspannanschläge D18 mm für Stangendurchmesser D19 mm–D24 mm vorgedreht 1 12123486 Bohrer für Bohraggregat bestehend aus: 1 Wendeplattenbohrer D15 mm 10 Wendeplatten für Stahl 2 Vollhartmetallbohrer D8 mm

Sąlyga: naujas, Lathe fully overhauled both electrically and mechanically, repainted as new. Replacement of the electrical cabinet with Siemens Series 1500 PLC Pendant control panel Replacement of cables and micro-switches Overhauled main motor Replacement of the loss lubrication oil pump Replacement of tool coolant pump Door interlock system checked with electromechanical safety Kedjd Hza Ispfx Acuonc Pneumatic unit Loader interface Bar end position 1 Replacement of all bearings Overhauled slides Camshafts replaced Replacement of all lubrication distributors Replacement of working and threading clutches Pneumatic loading chuck Fixed and rotating front spindles Variant with 20 mm diameter CE certification with attached documents

Sąlyga: naujas, Gamybos metai: 2025, Gildemeister 20 completely rebuilt as new - AC motor for production time control - AC motor for threading - GM-type soundproof enclosures Ksdpfx Acjfzk S Djuonc - Frequency inverter for spindle speed programming - Bar passage: 20 mm, 25 mm, 28 mm with integrated bar loader - Optional: CNC cross slides on X and Z axes, CNC pick-up with CNC secondary operation slide - CE marking

Sąlyga: beveik kaip naujas (naudotas), Lathe fully overhauled both electrically and mechanically, as new, with repainting Knjdpfowit Elsx Acuec

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1993, Pick-up Polygonal device Threading box Chip conveyor Tube bundle and upright Kjdpfx Acowd R Rbeuonc Various accessories

Sąlyga: naujas, Gamybos metai: 2024, Gildemeister 42ACF: this is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, being capable of machining parts up to 42 mm in diameter with the same ease and precision. The 42ACF lathe offers a range of features that make it particularly user-friendly. These include intuitive programming via a SIEMENS operator panel, which allows easy setting and adjustment of spindle speed, cycle time, and threading speed. Technical specifications: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal key size: 36 [mm] ● Cross slides: 4 (positions 1-2-4-5) ● Maximum feed length: 130 [mm] ● Main spindle speed: 400 - 4000 [rpm] without threading Kedpfx Aerpniqscujnc ● Indexing time: 1-1.5 [s] ● Cycle time: 2 – 90 [s] ● Power: 22 [kW] The Gildemeister 42ACF, moreover, is a multi-spindle lathe aimed at highly specialized industrial sectors, where precision and accuracy are indispensable.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, - Iemca SIR model 25 P automatic bar feeder, year 1998 - Chip conveyor - Threading device - Pick-up - Tool holder - Cams Ksdev Ea Nqspfx Acuonc

Sąlyga: naujas, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 mm - Bar passage extension on request: 25 mm - Cross slides: 4 (positions 1-2-4-5) - Maximum feed length: 100 mm - Main spindle speed: 400 – 4000 rpm with threading, 400 – 5000 rpm without threading - Transfer time: 0.7 s - Cycle time: 1.4 – 60 s - Power: 11 kW Kedpfx Asq Nzl Tocusnc ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT Consisting of AC motors (protection class IP 54), main and feed motors with a programmable PLC Siemens S7-1500 DOCUMENTATION: CE Certification with manuals Electrical diagrams 1 hard copy + 1 USB copy with files in .pdf format CE Directives 2006/42/EC - 2014/30/EU - 2014/68/EU STANDARD

Sąlyga: paruoštas naudoti (naudotas), Lathe rebuilt in 2008 - Integral Pietro Cucchi automatic bar loader, serial number 156B08 - Chip conveyor - Pick-up, threading device, recessing unit, tool holder, cams, and collets on the machine Ksdpfxov Rblwe Acujnc

Sąlyga: naujas, Gamybos metai: 2024, The Gildemeister 20ACN allows, via the SIEMENS operator panel, for easy setting and modification of spindle speed, cycle time, and threading speed. It is capable of machining parts up to 25 mm in size with the same ease and precision. It offers the possibility to fit CNC turrets. Position 6 consists of: CNC part-off slide and CNC pick-off slide, variable-speed CNC pick-off spindle, with synchronization and stop functions. The CNC pick-off spindle, with specific programming, can be used as a C-axis. Technical data: • Max. round bar diameter: 20 / 25 mm • Max. square bar diameter: 17 mm • Bar pusher: 100 / 125 mm • Travel of front spindles: 86 mm • Longitudinal guide block travel: 50 mm • Radial slide travel: 42 / CNC 50 mm • Axial slide travel: 50 / CNC 56 mm • CNC cutting stroke: 42 mm • CNC pick-off slide travel: 42 mm • CNC pick-off spindle travel: 100 mm Knedjuqh Ihepfx Acujc • Continuous spindle speed: 420 – 5,000 rpm • Rapid traverse times: 0.5 – 0.7 s • Main drive power: 11 kW / CNC 15 kW • Footprint without bar guide: 4,000 x 1,900 mm • Net weight: 5,500 kg The Gildemeister 20AC, on the other hand, is a multi-spindle lathe designed for highly specialized industrial sectors, where precision and accuracy are essential.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, - Machine rebuilt in 2006 with AC motors for spindle and feed drives - Complete automatic loader by Pietro Cucchi - Pick-up with AC drive motor - Threading device - Chip conveyor - Tool holder - Cams Kjdpfx Ajv Ebltscusnc - New bearing set for spindles (to be installed)