Hidrauliniai dvigubų stulpų presai ir keturių stulpų presai pirkti naudotą (310)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 630 t, stalo plotis: 1 800 mm, stalo ilgis: 1 600 mm, bendras svoris: 80 000 kg, Įranga: apsaugos šviesos užtvara, Siempelkamp FH 4_1_630T press A press in very good technical condition available for sale from a decommissioned stamping facility in Poland. Gedpfx Aov E N Rqjbmeuk Upgraded in 2024. Equipped with a new Simatic S7 control system and a new electrical cabinet. Optical safety barriers installed. The machine can be inspected under power – the press remains connected and operational.

Sąlyga: naudotas, Double-Column Hydraulic Press NEFF Type RHS 125 Z Hydraulic Deep Drawing Press Machine No. 3973 Year of manufacture: 1983 Pressing force: 125 tons Column width: 1050 mm Lateral column clearance: 550 mm Table surface: 1000 x 800 mm Ram surface: 1000 x 800 mm Ram stroke: 350 mm Maximum installation height: 750 mm Table height above floor: 960 mm Drawing cushion force: approx. 12 tons at 105 bar Drawing cushion stroke: 100 mm Table opening diameter: 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid return speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Guodpfxoguvtle Abmsk Oil tank capacity: approx. 1000 liters Main pump motor output: 22 kW Control pump motor output: 4 kW Control pump motor output: 2.2 kW Power supply: 400 Volt, 50 Hz - Hydraulic drawing cushion under the table with borehole through the tabletop, Ø 202 mm - Precise four-column guiding system at the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable limit stop via hydraulic motor - Shearing impact damping system - Two-hand control panel for stroke activation at the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating manual, electrical circuit diagram, and PLC program printout available Space requirements of the press (L x W x H): 2600 x 2400 x 4270 mm Weight: approx. 14 tons In good condition

Sąlyga: geras (naudotas), Gamybos metai: 1990, bendras aukštis: 7 200 mm, bendras plotis: 4 200 mm, bendras ilgis: 14 500 mm, gerklės gylis: 700 mm, Lenkimo ilgis: 14 000 mm Statramių atstumas: 10 500 mm Gsdpfx Abex Ehnwomjuk Valdymas: CYBELEC CNC 7000 su grafika Stalo plotis: 1 000 mm Atstumas tarp stalo ir presavimo sijos min./maks.: 1 800 mm Valdomos ašys: Y1; Y2; X1; X2 Valdymas atnaujintas 2012 m. Bendras galios poreikis: 75 kW Mašinos svoris apie min.: 465 t Reikalinga erdvė apie: 14 600 x 4 200 x 7 200 mm Papildoma informacija - Atstumas tarp stalo ir presavimo sijos: 1 800 mm

Sąlyga: naudotas, Gamybos metai: 1972, Pressure: 800 t Upright spacing: 3,250 mm Stroke: 1,100 mm Distance table/ram, stroke at top: 1,900 mm Table area: 3,100 x 1,900 mm Blankholder force in table: 300 t Blankholder stroke in table: 300 mm Blankholder area in table: 2,500 x 1,800 mm Blankholder force in ram: 80 t Blankholder stroke in ram: 200 mm Blankholder area in ram: 2,200 x 1,000 mm Ram area: 3,100 x 1,900 mm Gujdpfxevuuhyo Abmsk Side column passage: 900 mm Oil capacity: 4,700 l Drive power: 200.0 kW Space requirements (W x D x H): 4.95 x 3.3 x 10.2 m Height above floor level: 7.05 m With electro-hydraulic drive, hydraulically controlled blankholder in table and ram, hydraulic cutting impact damping. Disassembled and stored – video at the seller’s location available prior to removal.

Sąlyga: naudotas, Gamybos metai: 1999, Eiga: 650 mm Mašinos Nr.: 1417 Cilindro skersmuo: 250 mm Matmenys (Ilgis/Plotis/Aukštis): 1900 x 1600 x 3050 mm Gujdpfx Abjwzyudjmek Mašinos svoris apie 3,4 t

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 6 000 mm, įrengimo aukštis: 1 000 mm, bendras plotis: 2 400 mm, bendras ilgis: 3 500 mm, spaudimo jėga: 500 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, bendras svoris: 45 000 kg, alyvos bako talpa: 1 200 l, Įranga: apsaugos šviesos užtvara, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Test Press for Toolmaking and Forming Technology The machine is a tryout/test press designed for tools used in forming, deep drawing, and toolmaking applications. It is fully functional, ready for operation, and can be inspected and tested under power. The press features a 4-column design, a spacious working area, and a hydraulic system equipped with REXROTH pump technology. Control is via a SIEMENS S7-1200 with touch panel and extensive parameter-setting capabilities. Scope of delivery & accessories: - Tool sliding and lifting ball system by GÜTHLE - Hydraulic foot pedal (GÜTHLE) - Roller support/beams console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic power unit - Air cooler - Foundation plans / manufacturer's documentation Condition of the machine: - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically sound with no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Nominal force: 500 t - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions: approx. 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Inside column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measurement system) - T-slots present (receivers defined by customer) Hydraulic System: Main Cylinders - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/platen cylinders - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Draw cushion - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1,200 L - Oil system: 1,000 L capacity Speeds: - Advance stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: - Control - SIEMENS S7-1200 + ET200S - 12" Touch panel Schneider Electric - Operation modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without draw cushion - Deep drawing mode with draw cushion - Measuring & safety components: - Novatechnik linear measurement system (63 Bit) for ram & draw cushion - SICK light curtains front and rear (height: 1050 mm) - Side safety fences with limit switches - Remote maintenance via Ethernet possible - Mobile control console International notice (DE/EN): German Disassembly, removal, loading, and transport are the sole responsibility and at the expense and risk of the buyer. The seller does not provide equipment, personnel, or loading assistance. Pickup only after prior scheduling. Gedpfxjx D Tv Do Abmouk English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, Pressing force: max. 1,250 t Clear width: 585 mm Installation height: max. 480 mm Guedpfx Ajwuutbjbmsk Stroke: max. 355 mm Weight: 7,200 kg

Sąlyga: naudotas, Gamybos metai: 1980, Techniniai duomenys: Spaudimas: apie 100 t Atstumas tarp stulpų: 500 mm Išsikišimas iki stūmoklio centro: 350 mm Įrengimo aukštis: 450+100 mm Stūmoklio eiga - min.: 26 mm Stūmoklio eiga - maks.: 152 mm Stūmoklio reguliavimas: galimas/possible mm Stūmoklio paviršius: 550 x 400 mm Tvirtinimo stalas: 1020 x 710 mm Guodpfeu Nfhdex Abmsk Bendras energijos poreikis: 10 kW Apytikslis mašinos svoris: apie 7 t Apytiksliai matmenys: Ilg.:2,0 x Pl.:1,7 x Aukšt.:3,2 m - be tempimo pagalvės Presa galima pademonstruoti.

Sąlyga: naujas, The KP 100 A is a high-performance hydraulic press in the category of hydraulic presses and belongs to the H-frame hydraulic press product group from KNUTH. Manufactured in Europe, this machine offers a pressing force of up to 100 t and is ideally suited for deep-drawing, forming, and punching operations. The robust steel construction ensures high rigidity and durability, while the T-slots on the ram plate and worktable enable easy tool installation. The mobile two-hand operation provides additional safety, and the adjustable limit switch allows precise adjustment of the stroke. Thanks to the integrated Siemens PLC and maintenance-friendly hydraulic unit, the KP 100 A is suitable for both prototyping and series production. If you require customized solutions, you can request them at any time. Purchase the KP 100 A now—the powerful H-frame hydraulic press—to optimally meet your hydraulic press requirements. Gjdpfexhdzfjx Abmsuk

Sąlyga: naudotas, Gamybos metai: 1973, Pressure: 1,600 t Column gap: 4,100 mm Ram stroke: 1,450 mm Distance table/ram, stroke up: 2,750 mm Distance table/blank holder, stroke up: 2,200 mm Table surface: 4,000 x 2,200 mm Ram pressure: 1,000 t Blank holder pressure: 600 t Blank holder stroke: 1,000 mm Blank holder surface: 4,050 x 2,200 mm Gedpfx Aovut Ifsbmouk Ram surface: 3,200 x 1,650 mm Cushion pressure (in table): 360 t Cushion stroke (in table): 300 mm Cushion surface (in table): 3,500 x 1,600 mm Lateral frame clearance: 1,100 mm Oil capacity: 9,000 l Drive power: 390.0 kW Weight: 250.0 t Space requirements (W x D x H): 5.95 x 4.3 x 10.5 m Height above floor: 8.6 m Equipped with oil-hydraulic drive, hydraulically controlled cushion in table and ram. Disassembled and stored – video at seller available before dismantling.

Gamybos metai: 1984, Sąlyga: naudotas, Pressure: 100 t Clearance between uprights: 1000 mm Stroke: 150 mm Table area: 1000 x 700 mm Distance table/ram: 500 mm Draw cushion stroke: 180 mm Ram area: 1000 x 700 mm Ram bores x depth: 50 mm Strokes per minute: 85 spm Pin hole (depth x diameter): 85 x 50 mm T-slots: 22 mm to DIN 650, diagonal arrangement Number of T-slots: 2 Sheet width: 400 mm Sheet length: 1000 mm Space requirements approx.: 3.0 x 3.0 x 3.0 m Machine weight approx.: 8 t Gusdsfn Apzepfx Abmek Total power requirement: 30.2 kW - Fine stroke adjustment - Cutting impact damping - Oil extraction - 2 cylinders - Roller feed by Dreher, type WAV, control system PMS3000 by Dreher - Soundproof enclosure - Machine overhauled in 2001 and fitted with new Siemens SIMATIC OP17 control

Sąlyga: naudotas, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine no. 5509 Year of manufacture: 1971 Pressing force 50 tons Column width 550 mm Lateral opening between columns 150 mm Table size 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Maximum ram stroke 150 mm Maximum installation height 390 mm Table height above floor 890 mm Rapid approach speed approx. 130 mm/sec Working speed approx. 20 mm/sec Return speed approx. 130 mm/sec Godpfx Abjv Srfwjmsuk Motor power 4 kW Power supply 380 Volt, 50 Hz - Infinitely variable press force adjustment - Rapid stroke and working stroke - Pressure or stroke dependent stroke limitation - Adjustable pressure holding time, pressing time extension 0.5-6 s - Mechanically adjustable fixed stop via handwheel on ram - SICK light barrier, type LVU - Stroke counter - Double column guide on ram Space requirements (L x W x H) 1100 mm x 1050 mm x 2320 mm Weight approx. 1.5 tons In good condition

Sąlyga: geras (naudotas), Gamybos metai: 1994, veikimo valandos: 590 000 h, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 600 mm, stalo aukštis: 1 125 mm, įrengimo aukštis: 600 mm, bendras plotis: 3 500 mm, spaudimo jėga: 400 t, stalo plotis: 1 250 mm, stalo ilgis: 1 240 mm, alyvos bako talpa: 3 400 l, You can receive further images and technical data via email. Sale is ex location without warranty or return. Dismantling and collection must be carried out by the buyer. We will hand over the press free of media. Gusdpfjvb D Trox Abmok

Sąlyga: naudotas, Techninės detalės: Spaudimas: 80 t Įrengimo aukštis: 600 mm Gujdpfx Abju Nfnwomek Stūmoklio eiga: 200 mm Spaudimas: 30 t Įrengimo aukštis: 680 mm Stūmoklio eiga: 300 mm Rėmo plotis: 1060 mm Pagrindo plokštės tvirtinimo paviršius: 1060x600 mm Stalo aukštis nuo grindų: 720 mm Stūmoklio greitis: Stūmoklis/ Ram 1: 40 mm/s Stūmoklio greitis: Stūmoklis/ Ram 2: 95 mm/s Pagrindo plokštės tvirtinimo paviršius: Dm=150 mm Bendras energijos poreikis: 13 kW Apytikris staklių svoris: 4,5 t Apytikriai užimama vieta: Ilgis:1,6xPlotis:1,1xAukštis:3,4 m SURINKIMO PRESAS - Presas su dviem stūmokliais 30 t + 80 t - Valdymas koja Presas parduodamas Leipcige, kaip aprašyta, išvežimui laisvas.

Sąlyga: naudotas, Gamybos metai: 1997, Spaudimas 500 t Stovo plotis 1550 mm Eiga 600 mm Atstumas tarp stalo ir stūmoklio, didžiausia eiga viršuje, reguliavimas viršuje 900 mm Stalo matmenys 1200 x 1300 mm Ištraukimo pagalvės slėgis stale 250 t Ištraukimo pagalvės eiga stale 150 mm Ištraukimo pagalvės plotas 950 x 950 mm Stalo aukštis virš grindų 1245 mm Šoninis praėjimas tarp stovų 1250 mm Stūmoklio plotas 1200 x 1300 mm Nuleidimo greitis 750 mm/s Pakėlimo greitis 780 mm/s Darbinis greitis 105 mm/s Alyvos kiekis 4000 l Variklio galia 263,0 kW Svoris 45,0 t Užimamas plotas (PxGxA) 3,3 x 3,3 x 6,1 m Aukštis virš grindų 6,1 m Pagaminimo metai 1978 - Kapitalinis remontas 1997 Leidžiama rankiniam įdėjimui pagal Vokietijos saugos taisykles (UVV) su alyvos hidrauline pavara, hidrauline ištraukimo pagalve stale, pneumatiniu išstūmėju stūmoklyje (0,5 t), smūgio slopinimas su štampo eigos ribotuvu (varikliu reguliuojama), mechaninis stūmoklio fiksatorius viršutinėje padėtyje Godpjvuk T Eofx Abmsuk kaip stovi ir guli, BE paleidimo

Gamybos metai: 1981, Sąlyga: naudotas, Pressure: 40 t Stand width: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/s Drawing cushion hydraulic pressure/stroke: 60 Gsdpfx Abob U Hw Tomjuk Ejector force: 25 t Total power requirement: 15 kW Space requirement: approx. 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/s Return speed: 200 mm/min with hydraulic drawing cushion – speeds: Rapid advance speed: 240 mm/s, infinitely adjustable

Sąlyga: naudotas, Double Column Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Machine No. 707 Year of manufacture: 1994 Press force: 60 tons Column width: 1090 mm Side clearance: 275 mm Gujdpov Srfdefx Abmjk Ram surface: 890 x 540 mm Table surface: 990 x 540 mm Max. ram stroke: 300 mm Installation height: 390 mm Table height above floor: 900 mm Hydraulic operating pressure: 250 bar Rapid approach downward: 47 mm/s Rapid return upward: 75 mm/s Working speed: 15 mm/s Return speed: 37 mm/s Motor power: 15 kW (2 x 7.5 kW) Electrical connection: 400 Volt, 50 Hz, 15.85 kW - SICK light curtain, Type LVS 600 - Manually adjustable limit cams for stroke limitation - Press force adjustment via handwheel - Infinitely variable dwell time setting - Two-hand operator control at the machine - Ram plate additionally guided by 2 lateral guiding rods, Ø 50 mm - Table plate with 18 mm T-slots, slot pitch 185 mm - Through hole in table plate Ø 100 mm with reducing insert to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet mounted on the side of the machine frame - 3 monitored safety valves for hydraulics - UVV conformity for manual loading operations - Electrical circuit diagram Installation dimensions (L x W x H): 1900 x 1350 x 2570 mm Weight: 3.1 tons In good condition

Sąlyga: naudotas, Gamybos metai: 1998, Pressure 3500 t Stroke 900 mm Distance table / ram, stroke bottom 1000 mm Distance table / ram, stroke top 1900 mm Table area 3150 x 2150 mm Ram area 3150 x 2150 mm Max. total tool weight 30.0 t Max. upper tool weight 20.0 t Speed from 400 mm/s Working speed 0.9 - 9.2 mm/s Hydraulic operating pressure 280 bar Oil capacity 5500 l Rated current 760 A Voltage 400 V Frequency 50 Hz Drive power 425 kW Weight 231.0 t Hydroforming press / IHU press / Internal high-pressure forming press Maximum pre-forming force approx. 1000 t Total tool weight approx. 30 t Upper tool weight approx. 20 t · Tool interface: 4 controlled axes, 3 on/off ram functions, 4 on/off table functions · Parallelism control: across press length · Light curtain: front and rear sides · Light barrier: left and right sides · Ram locking in upper position · Two-hand control desk: 1 · Independent high-pressure circuit water hydraulic system: 2 · Max. working pressure: 3,000 bar · Displacement per pressure intensifier: 3.74 l · 2 filling pumps: volume and pressure dependant on power supply · Pressure intensifier location: to be determined · Main pumps: located on the press headpiece/oil tank Guedpfxovuukhj Abmjk · Tool change table: 6.7 x 2.15 m · Max. tool size: 3.15 x 2.15 m · Tool clamping at ram: hydraulic · Tool clamping at table: mechanical · Electrical control: Schuler Multiview HF Attention: This machine is an EU re-import! If the machine is to be installed and operated within the EU, it must be adapted to comply with the current EU directives of the country of installation before commissioning. These works are not included in the offer price. As is, ex location, WITHOUT commissioning, dismantled and stored

Gamybos metai: 1980, Sąlyga: naudotas, Pressure 100 t Stand width - mm Stroke 350 mm Table dimensions 1150 x 700 mm Gedodlxctspfx Abmsuk Total power requirement 11 kW Machine weight approx. t Space required approx. m with cutting impact damping and drawing cushion Machine without control cabinet

Sąlyga: naudotas, Gamybos metai: 1978, Pressure: 800 t Upright distance: 3010 mm Stroke: 300 mm Table/ram distance, max. stroke up, adjustment up: 1350 mm Table surface: 3000 x 1800 mm Table height above floor: 500 mm Side column opening: 1500 x 1400 mm Ram surface: 3000 x 1800 mm Speed from: 300 mm/s Oil capacity: 900 l Height above floor: 5.4 m Height below floor: 2.1 m Drive power: 200.0 kW Weight: 80.0 t Space requirement (W x D x H): 5.2 x 2.6 x 7.5 m Hydraulic high-speed press Gjdpfsvuk Ipjx Abmjuk with oil-hydraulic drive, pressure/time and stroke-dependent control, hydraulic cutting shock absorption, mechanical depth stop (motorized adjustment), ram lock in top dead centre Maximum stroke frequency: 50/min (when using automatic feeding systems) as is and as lies, WITHOUT commissioning, dismantled and stored

Sąlyga: naudotas, Gamybos metai: 1996, Spaudimas 100 t Stovo plotis 1525 mm Eiga 450 mm Atstumas tarp stalo ir slankiklio, didžiausia eiga viršuje, reguliavimas viršuje 850 mm Stalo paviršius 1500 x 1150 mm Traukos pagalvės spaudimas stale 30 t Traukos pagalvės eiga stale 150 mm Stalo aukštis virš grindų 940 mm Šoninis stovo praėjimas 480 mm Slankiklio paviršius 1500 x 1150 mm Alyvos kiekis 1200 l Gujdpfx Asvuufxobmek Svoris 25,0 t Užimamas plotas (PxGxA) 4,2 x 1,75 x 5,1 m Sick šviesos užuolaida Leidžiama rankiniam įdėjimui pagal CE standartą su alyvos hidrauline pavara, hidrauline traukos pagalve / stalo išstūmėju, hidrauliniu išstūmėju slankiklyje, hidrauliniu pjovimo smūgio slopinimu, mechaniniu gylio ribotuvu pamatų duobė nereikalinga 2025 m. – ruošiama: nauja valdymo ir saugos elektronika – Siemens S7-1500F, Patogus valdymas per lietimui jautrų ekraną Vaizdo įrašas prie tiekėjo prieš demontavimą galima peržiūrėti

Sąlyga: naudotas, Gamybos metai: 1977, Spaudimas 250 t Stovo tarpas 930 mm Eiga 200 mm Atstumas nuo stalo iki štampo, eiga viršuje 600 mm Stalo matmenys 900 x 860 mm Traukimo pagalvės jėga 100 t Traukimo pagalvės eiga 50 mm Traukimo pagalvės plotas 350 x 400 mm Stalo aukštis virš grindų 950 mm Šoninis stovo praėjimas 380 x 380 mm Štampo paviršius 850 x 700 mm Greitis žemyn 400 mm/s Greitis aukštyn 400 mm/s Gujdpfjvuk Trox Abmek Darbo greitis 30 mm/s Alyvos talpa 350 l Variklio galia 45,0 kW Svoris 11,5 t Užimamas plotas (P x G x A) 2,0 x 1,2 x 3,4 m Leidžiama naudoti tik su saugiais įrankiais arba stacionariomis apsaugomis pagal Vokietijos nelaimingų atsitikimų prevencijos taisykles (UVV) su alyvos hidrauline pavara, reguliuojama priklausomai nuo slėgio/laiko ir eigos, hidraulinė traukimo pagalvė stalo viduje, mechaninis štampo eigos ribotuvas su hidrauliniu slopinimu fundamento duobė nereikalinga kaip stovi ir guli, BE paleidimo / BE papildomų darbų

Sąlyga: naudotas, Gamybos metai: 1987, Spaudimas 65 t Stovo tarpas 930 mm Eiga 1100 mm Atstumas tarp stalo ir stūmoklio, eiga viršuje 1300 mm Stalo matmenys 1340x1084 mm Prašviečiama stalo anga 604 x 404 mm Stalo aukštis nuo grindų 1000 mm Šoninis stovo praėjimas 705 mm Stūmoklio plotas 1230 x 990 mm Greitis žemyn nuo 620 mm/s Greitis aukštyn 207 mm/s Darbinis greitis 320 mm/s Alyvos talpa 450 l Variklio galia 15,5 kW Gjdpsvuk Szofx Abmjuk Svoris 8,0 t Užimamas plotas (PxGxA) 2,8 x 2,6 x 4,85 m Hidraulinė greitaeiginė apipjaustymo presas liejinio detalėms Su alyvos hidrauline pavara, 4 hidrauliniais šoniniais stumdikliais, hidrauliniu spaudikliu AW padėtyje / išstumėju VW padėtyje stūmoklyje, kritimo apsauga / stūmoklio užraktas Stalo plotas 1340 x 705 mm arba 930 x 1084 mm Stūmoklio plotas 1230 x 705 mm arba 930 x 990 mm Įdedama plokštė su praleidimo anga 320 x 260 mm kaip stovi ir guli, BE įjungimo / BE papildomų darbų

Sąlyga: naudotas, Gamybos metai: 1998, Slėgis 63 t Stulpelių tarpas 1000 mm Eiga 300 mm Atstumas stalas/stūmoklis, didžioji eiga viršuje, reguliacija viršuje 850 mm Stalo paviršius 980 x 500 mm Stalo aukštis virš grindų 850 mm Stūmoklio plotas 130 mm Judėjimo greitis žemyn nuo 400 mm/s Judėjimo greitis aukštyn 461 mm/s Darbinis greitis 14–97 mm/s Variklio galia 15,0 kW Svoris 5,0 t Užimama vieta (P x G x A) 2,0 x 1,6 x 3,9 m Su alyvos hidrauline pavara, slėgio priklausomai valdoma, mechaninis gylio ribotuvas Pamatinės duobės nereikia Kaip stovi ir guli, be paleidimo Godpfx Abevzxrvjmjuk

Sąlyga: naudotas, Gamybos metai: 1979, Press force 18 t Diameter 250 mm Gedpovzxp Isfx Abmouk Stroke 150 mm Stand width 210 mm Max. distance table – ram 400 mm Drive power 5.5 kW Machine weight approx. 1.1 t Space requirements approx. 1.0 x 1.0 x 1.8 m Hydraulic down-stroke press with oil-hydraulic drive, pressure/time-dependent control As-is, not commissioned Price for commissioning (in current condition) on request