Stulpinės gręžimo staklės, gręžimo pajėgumas 40–49 mm pirkti naudotą (87)

Sąlyga: geras (naudotas), Gamybos metai: 1954, Drilling machine, upright drilling machine, pillar drill, column drill - Table size: 400 mm - Spindle taper: MT4 - Throat depth: 320 mm - Speeds: 80-700 rpm - Column diameter: Ø 160 mm - Spindle stroke: 175 mm - VIP gearbox - Feed: 0.09-0.28 mm/rev - Speed indicator defective - Dimensions: 1100/500/H1960 mm - Weight: 650 kg Cjdpfx Ajdi Smkedmjrk

Sąlyga: geras (naudotas), Gamybos metai: 1969, Funkcionalumas: visiškai funkcionalus, Drilling capacity: 50 mm Throat depth: 355 mm 8 gearbox speeds: 67 – 750 rpm Spindle motor: 2.5 / 3.3 kW Table size: 500 x 620 mm Crjdpfxsxnqy Uj Admek Spindle stroke: 220 mm Taper: MK 5 4 automatic feeds Oil recirculation lubrication

Sąlyga: geras (naudotas), Machine No.: 26798 Type / Model: BS 40 AIII Drilling capacity (steel / cast iron): 50 / 60 mm Spindle taper: MK 5 Spindle speeds: 32 to 1,400 rpm Feed: 0.11 to 1.73 mm/rev Table size: 780 x 650 mm Clamping surface: 630 x 500 mm Crsdpoiypmxsfx Admok Head height adjustment: 250 mm Stroke: 280 mm Footprint: 700 x 1,200 mm Total connected load: 6.7 kW Equipment / features: Thread cutting function, right/left rotation; automatic feed, separate control cabinet Condition: good Weight: 1.5 t Dimensions: 780 x 1,200 x 2,700 mm

Sąlyga: labai geros būklės (naudotas), Column drilling machine Manufacturer: Ixion Model: BS 30 Spindle taper: MK 4 Table size: 550 x 405 mm Infinitely variable speeds from 16 to 2800 rpm Throat depth: 280 mm T-slot width: 16 mm Vice: 150 mm jaw width Drill chuck: 3-16 mm 380 Volt Depth: 1000 mm Width: 720 mm Height: 1950 mm (with pallet: 2060 mm) Cjdpfxjv S Akqs Admjrk

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Parduodama visiškai atnaujinta Gillardon stulpininė gręžimo staklės (koloninė gręžimo mašina) iš Gillardon gamintojo. Staklės buvo visiškai išardytos ir atnaujintos (tarp jų, naujai sumontuoti veleno guoliai). Gillardon GB 40 VE Pagaminimo metai: 2003 Elektromagnetinis padavimas 0,1/0,16/0,25 valdoma kryžminiu svertu mygtuko paspaudimu Besikintantis apsukų dažnis 2-jų pakopų variklis Darbinė šviesa Avarinio stabdymo mygtukas Pinolės eiga 200 mm Išsikišimas 350 mm Stalo dydis 630x535 mm Tvirtinimo paviršius 400x500 mm Kūgis MK 4 Greitos fiksacijos griebtuvas 3-16 mm Bendras aukštis 2060 mm Svoris 500 kg Atsiėmimas ir apžiūra galimi susitarus adresu 89558 Böhmenkirch Siuntimas galimas už papildomą mokestį Cedpfx Adsxn T Syjmerk Pakrovimui yra krautuvas.

Sąlyga: geras (naudotas), Gamybos metai: 1996, 1 x Drehmaschine MAS Csdpfjtpn Thsx Admsrk A 40 CA Baujahr: 1996 Die Maschine kann unter Strom besichtigt werden.

Sąlyga: naujas, Drilling capacity cast iron / steel ----- 45 / 40 mm Tapping capacity cast iron / steel ----- 24 / 20 mm Motor ----- 1.5 kW Speed range ----- 50 ~ 1450 rpm Credpfxsga T H Do Admek Spindle travel ----- 180 mm Spindle taper ----- MT4 Automatic spindle feed ----- 0.1 - 0.2 mm/rev Drill table ----- 560 x 560 mm Base ----- 730 x 500 mm Throat depth ----- 350 mm Column diameter ----- 150 mm Maximum distance spindle - table ----- 770 mm Maximum distance spindle - base ----- 1210 mm Weight ----- 600 KG INCLUDES * LED work lamp * Coolant system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Case with various tools

Sąlyga: naujas, As a machinery dealer in Offenburg, we offer new and used ALZMETALL bench and pillar drilling machines. You can find an overview of our drilling machines on our website. If you have any questions, feel free to give us a call. Here we present the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V Pillar Drilling Machine Condition: NEW Standard features: 7" TFT LCD display with touch function: - Manual input of target spindle speed - Actual speed display - Integrated drilling depth display with touch zero-point transfer - Virtual drilling depth scale in the display - Machine status and warning indicators on the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Stepless speed adjustment via adjustment lever - Spindle guard with electric safety interlock - Three separate buttons for clockwise, counterclockwise, and stop - Emergency stop mushroom push button (locking) - Lockable main switch - Clockwise and counterclockwise operation via contactor control - Control voltage 24 Volts - Protection class IP 54 - Coating: DD textured lacquer signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Tapping capacity steel E 335 (St 60): M 24 Tapping capacity cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable throat (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Csdsxd Trlepfx Admjrk Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch for tapping operation Further options available: - LED machine lamp - Coolant system B - On-screen technology calculator - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Quick-release drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping possible. Errors, modifications, and prior sale excepted. Didn’t find the right machine? Please feel free to contact us.

Sąlyga: naujas, Drilling capacity in steel (diameter): 30 mm Throat depth: 254 mm Quill travel: 120 mm Spindle taper: MT 4 Number of speeds: 9 Speed range: 120 - 1810 rpm Column diameter: 92 mm Table clamping surface: 475 x 425 mm Total power requirement: 1.1 kW Dimensions: 915 x 450 x 1705 mm Weight approx.: 135 kg Column Drilling Machine OPTIdrill D33 Pro Promo Set / 3003040SET Sanders item no.: 12380887 Description: - Industrial-grade motor - User-friendly safety switch to IP 54 - Integrated digital drilling depth and speed display in the housing - Separate emergency stop push button - Precision spindle boring - 24 V DC safety electrics - Guaranteed concentricity accuracy less than 0.02 mm measured at the quill - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Digital depth gauge - Precisely machined, robust drill table with diagonally arranged T-slots and peripheral coolant channel - V-belt cover with safety switch - One-piece die-cast aluminum quill lever with soft-grip handles - Large, height-adjustable safety guard with safety switch - Heavy-duty construction of the entire machine Cjdpfx Asq Nrmredmsrk Scope of delivery: - Quick-action drill chuck 1 - 16 mm - Morse taper MT 4/B16 - T-slot nuts - Machine vice BMP

Sąlyga: naujas, Bernardo Vario Column Drilling Machine SB 40 Profi Technical Specifications - Maximum drilling capacity: 40 mm - Drill chuck: 1–16 mm / B 18 - Morse taper: MK 4 - Spindle speed, stepless: 90–1455 rpm - Throat: 320 mm - Drill table swivel range: -50° to +50° - Max. distance spindle/table: 590 mm - Distance spindle/base plate: 1155 mm - Quill travel: 160 mm - Quill feed: 0.1 / 0.2 / 0.3 mm/rev - Column diameter: 120 mm - Table size / T-slot size: 505 x 425 mm / 14 mm - Working area base plate: 360 x 370 mm - Motor power: 1.0 / 1.5 kW Crjdpod Hxk Njfx Admsk - Machine dimensions (W x D x H): 500 x 930 x 1870 mm - Weight approx.: 380 kg Features - Variable drive for precise speed setting - Quill feed selectable by hand or via mechanical feed - Easy tool change with automatic tool ejector - Spindle speed is quickly and easily readable via digital display - Heavy-duty, swivel cast iron table with T-slots and coolant channel - Coolant system and lighting included - Adjustable drilling depth stop, drilling depth readable via scale - Reversible rotation for tapping Scope of Delivery - Drill chuck arbor MK 4 / B 18 - Coolant system - Digital speed display - Quick-action drill chuck 1–16 mm / B 18 - Reducing sleeves MK 4 / 3, MK 4 / 2, MK 3 / 1 - LED machine light - Automatic tool ejector - Height-adjustable safety guard

Sąlyga: paruoštas naudoti (naudotas), ERLO TCA-40 Gręžimo plieno pajėgumas, skersmuo: 40 mm (maks.) Atstumas nuo kolonos iki ašies: 360 mm Gręžimo eiga: 200 mm Didžiausias sriegio diametras: M33 Griebtuvo kūgis: MT4 Cjdpfx Aou Hyc Djdmjrk Kolonos skersmuo: 175 mm Sukimosi greitis min./maks.: 61/1169 aps./min. Stalo matmenys: 550x550 mm Paruošta gamybai!

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat depth: 300 mm Drilling stroke: 120 mm Spindle taper: MK 4 Table: 500 x 460 mm Column diameter: 115 mm Spindle speed: 75–3200 rpm Feed rates: 0.1 – 0.18 – 0.26 mm/rev Total power requirement: 1.5 kW Machine weight approx.: 350 kg Dimensions (L x W x H): 2.2 x 0.8 x 0.7 m Column drilling machine features: - Thread cutting function - Digital depth gauge - Coolant system - 2-speed motor Crsdpfx Adjvn U Awemok - Spindle guard - Swivelling table - Swivelling drilling head - LED lighting Packing dimensions: 730 x 760 x 188 mm Weight: 340 kg

Sąlyga: naujas, ALZMETALL AX3/SV Column Drilling Machine NEW Manufacturer: Alzmetall Model: AX3 SV Condition: New Drilling capacity in steel: 40 mm Tapping capacity in steel: M24 Cast iron: M30 Short spindle: MK 3 Spindle stroke: 120 mm Working radius: 293 mm Column diameter: 115 mm Machine table: 515 x 360 mm Distance spindle to table: 117/701 mm T-slots: 2 x 14 x 224 mm Feed (per revolution): 0.1 + 0.2 mm Machine height: approx. 1840 mm Net weight: approx. 270 kg Drive: stepless (variable speed) Motor: 750/1500 rpm Power: 1.0 / 1.6 kW Spindle speed range: 80-1125 rpm Additional equipment: - Reversing switch - LED machine lamp - Tapping device - Coolant system B Available immediately from stock Csdpfx Aoxd Trfodmork

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Tapping capacity: M 24 Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 short spindle MK Table size: 515 x 360 mm Spindle speed: 80 – 1125 rpm Feed: 0.10 + 0.20 mm/rev Credpfsxaar Rjx Admok Column diameter: 115 mm Distance spindle / table: 117 / 701 mm Total power requirement: 1.0 / 1.6 kW Weight: 270 kg Machine height: 1840 mm Features: - Main switch with lockable motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle guard with electrical interlock - Operating manual in German Including special equipment: - Tapping device Pos. 20.0 (tapping with stop) - Coolant system "B" Pos. 25.

Sąlyga: naudotas, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Drilling stroke: 170 mm Table clamping surface: 730 x 590 mm Speed range: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: MT 4 Total power requirement: 1.8 kW Machine weight approx.: 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: - feed unit Csdpfjwn T A Usx Admjrk - 2 speed gearbox - forward/reverse operation - foot switch - machine lamp

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 515 x 360 mm Speed range: 160 – 2250 rpm Column diameter: 115 mm Feed: 0.10 + 0.20 mm/rev Distance spindle / table: 117 / 701 mm Total power requirement: 1.45 / 1.90 kW Weight: 285 kg Dimensions (L x W x H): 500 x 800 x 1840 mm Crjdpoxaakajfx Admsk Equipment: - Automatic feed 0.10 + 0.20 mm/rev - Infinitely variable speed adjustment - Short spindle MT 3 - Mushroom-head emergency stop button (latching) - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle guard with electric interlock - 2 m cable with 16A plug - Operating manual in German Including special equipment: - Coolant system "B" Pos. 25.

Sąlyga: naudotas, Drilling capacity in steel (diameter): 35 mm Throat depth: 300 mm Drilling stroke: 160 mm Table clamping surface: 610 x 250 mm Max. spindle speed: 1,500 rpm Feed rate: 0.05 - 0.1 - 0.2 mm/rev Tool holder: MT 4 X-axis travel: 530 mm Y-axis travel: 240 mm Total power requirement: 1.5 kW Machine weight approx.: 0.6 t Cedpfx Adswu Hhwemjrk Dimensions (L x W x H): 1.2 x 0.8 x 2.0 m Drilling machine with: - Power feed - Tapping device - Machine lamp

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 515 x 360 mm Speed range: 160 - 2250 rpm Column diameter: 115 mm Feed: 0.10 + 0.20 mm/rev T-slots: 2 x 14 x 224 mm Spindle-to-table distance: 117 / 701 mm Motor power: 1.45 / 1.90 kW Weight: 285 kg Machine height: 1840 mm NEW ALZMETALL MODEL SERIES 7" TFT LCD display with touch function: * Target spindle speed * Actual speed display * Integrated drilling depth indicator * Touch zero point setting * Virtual drilling depth scale in display * Machine status indicators and warnings in display Crodpfxsxab Rho Admek * Service information * Selectable operator language: DE/EN/FR/ES/IT/NL/RU. Equipment: - Continuously variable speed adjustment via adjustment lever - Automatic spindle feed with overload protection - Spindle guard with electrical interlock - Three individual buttons for forward – reverse – stop - Emergency stop mushroom push button (latching) - Main switch, lockable - Forward and reverse via contactor control - Control voltage: 24 volts - Protection class IP 54 - Paint finish: DD texture paint, Signal White RAL 9003, PANTONE 7545c, black Including special accessories: - 25. Coolant system B.

Sąlyga: naujas, Drilling capacity in steel (diameter): 40 mm Throat depth: 300 mm Drilling stroke: 120 mm Spindle taper: MT 4 Table dimensions: 500 x 460 mm Column diameter: 115 mm Speed range: 75–3200 rpm Feed rates: 0.1 – 0.18 – 0.26 mm/rev Total power requirement: 1.5 kW Machine weight: approx. 350 kg Crsdpjupxi Hefx Admok Dimensions (L x W x H): 2.2 x 0.8 x 0.7 m Column drilling machine equipped with: - Automatic feed - Tapping function - Digital depth display - Coolant system - 2-speed motor - Spindle guard - Swivelling table - Swivelling drill head - LED lighting Packaging dimensions: 730 x 760 x 188 mm Weight: 340 kg

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: 3 MT Table: 515 x 360 mm Spindle speed: 160 - 2250 rpm Column diameter: 115 mm Thread M 24 ST60 Thread M 30 GG20 Feed: 0.10 + 0.20 mm/rev Distance spindle/table: 117 / 701 mm Motor power: 1.0 / 1.6 kW Weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL SERIES 7" TFT LCD display with touch function: * Set value display for spindle speed * Actual spindle speed display * Integrated drilling depth display * Touch-based zero point setting * Virtual drilling depth scale on display * Machine status displays and warning messages on display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU. Features: - Thread cutting device * For tapping with stop * Max. 6 threads/min (thread cutting performance speed-dependent) * Thread depth adjustable via depth stop * Within the TFT LCD display (3 tools). - Infinitely variable speed adjustment via lever - Automatic spindle feed with overload protection - Spindle guard with electrical interlock - Three separate buttons for clockwise - counterclockwise - stop - Mushroom-head emergency stop button (latching) - Main switch, lockable - Clockwise and counterclockwise via contactor control - Control voltage 24 V - Protection rating: IP 54 - Paint: DD textured paint, signal white RAL 9003, PANTONE 7545c, black - Initial fill of machine oil: oil bottle supplied loose Including special accessories: - 25. Coolant system B. Crodpfxexab Nwe Admjk

Sąlyga: naudotas, Gamybos metai: 1984, Drilling capacity in steel (diameter): 23 mm Throat depth: 270 mm Drilling stroke: 110 mm Spindle taper: MK 3 Table size: 400 x 385 mm Cedpfxstqy Ngj Admerk Feeds: mm/rev Spindle speed: 135 - 825 rpm Total power requirement: 0.9 kW Machine weight approx.: 0.25 t Dimensions (L x W x H): 1.2 x 0.8 x 2.0 m

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 293 mm Drilling stroke: 120 mm Morse taper: MT 3 Table: 515 x 360 mm Spindle speed: 80 – 1125 rpm Column diameter: 115 mm Thread M 24 ST60 Thread M 30 GG20 Feed rate: 0.10 + 0.20 mm/rev Distance spindle/table: 117 / 701 mm Motor power: 1.0 / 1.6 kW Crjdpfx Ajxabyiedmek Weight: 270 kg Machine height: 1840 mm NEW ALZMETALL MODEL SERIES 7" TFT LCD display with touch function: * Target spindle speed * Actual speed display * Integrated drilling depth display * Touch zero point transfer * Virtual drilling depth scale on display * Machine status indicators and warning messages on display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU Equipment: - Tapping device * for tapping with depth stop * max. 6 threads/min (tapping performance depends on spindle speed) * Thread depth adjustable via depth stop * in TFT LCD display (3 tools) - Stepless speed adjustment via adjustment lever - Automatic spindle feed with overload protection - Spindle guard with electrical interlock - Three separate push buttons for right rotation – left rotation – stop - Mushroom push-button (latching) for EMERGENCY STOP - Main switch, lockable - Right- and left-hand rotation via contactor control - Control voltage 24 V - Protection class IP 54 - Finish: DD texture paint Signal White RAL 9003, PANTONE 7545c, black - Initial machine oil fill: oil bottle supplied loose Including special accessories: - 25. Coolant system B.

Sąlyga: naujas, Drilling capacity in steel (diameter): 32 mm Throat (distance spindle to column): 200 mm Drilling stroke: 120 mm Spindle taper: MT 4 Table dimensions: 290 x 270 mm Column diameter: 92 mm Spindle speed: 150 – 2450 rpm Feed rates: 0 mm/rev Total power requirement: 1.1 kW Machine weight approx.: 95 kg Dimensions (L x W x H): 0.66 x 0.8 x 1.7 m Column drilling machine equipped with: Crodpsupw Saofx Admek ARBO / CE-certified safety guard Keyless drill chuck with pin Tilting worktable Depth stop Drift key

Sąlyga: naujas, Drilling capacity in steel (diameter): 32.0 mm Tapping capacity: M22 Drilling stroke: 125 mm Throat depth: 280 mm Morse taper: 3 MT Table: 450 x 380 mm / 14 mm T-slot Cjdpfxoxabiqe Admjrk Speed range: 70 - 3,500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 110 mm Weight: 320 kg Dimensions (L x W x H): 500 x 800 x 2,100 mm Total power requirement: 1.1 / 2.2 kW Features: - Infinitely variable speed control, ideal for precise adjustment of cutting speed - Automatic tool ejector and tapping device as standard - Electromechanical power feed, adjustable from 0.1 to 0.3 mm/rev - Heavy-duty cast iron table with rotatable and tiltable support surface - T-slots in the machine base allow clamping of tall workpieces - Guaranteed concentricity accuracy = 0.02 mm, measured at the quill - Hardened and ground gears ensure smooth operation - Adjustable drilling depth stop with easy-to-read scale Scope of delivery: - Drill chuck arbor MT 3 / B 16 - Reducing sleeves MT 3 / 2, MT 3 / 1 - Geared drill chuck 1 - 13 mm / B 16 - Coolant device - Electromagnetic spindle feed - Tapping device - Automatic tool ejector - LED machine lamp - Digital speed display - Initial fill with Shell Tellus 46 - Height-adjustable protective cover

Sąlyga: naujas, Drilling capacity in steel (diameter): 40.0 mm Throat depth: 320 mm Quill stroke: 160 mm Morse taper: 4 MT Table: 505 x 425 mm Tiltable: +/- 50 degrees T-slots: 14.0 mm Spindle speed: 90 - 1455 rpm Quill feed: 0.1 / 0.2 / 0.3 mm/rev Column diameter: 120 mm Total power requirement: 1.0 / 1.5 kW Machine weight: approx. 380 kg Dimensions (L x W x H): 500 x 930 x 1870 mm Features - Variable drive for precise speed adjustment - Quill feed selectable either manually or via mechanical feed - Easy tool change with automatic tool ejector Codpfxoxaazro Admjrk - Set spindle speed quickly and easily readable via digital display - Heavy-duty, swiveling cast iron table, with T-slots and coolant channel - Coolant system and lighting included - Adjustable drilling depth stop, drilling depth readable via scale - Forward/reverse operation for thread cutting Scope of delivery - Drill chuck arbor MK 4 / B 16 - Coolant system - Digital speed display - Quick-action drill chuck 1 - 16 mm / B 16 - Reducing sleeves MK 4 / 3, MK 4 / 2, MK 3 / 1 - LED machine lamp - Automatic tool ejector - Height-adjustable safety guard