Gręžimo presas

FFI Pehac FG 2102 SSC 40 aut.

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: Nledjcc D Ddspfx Airsd The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: geras (naudotas), NHH lathe Swing diameter over bed: 260 mm Nlsdpfsmw Ukcex Airsd Swing diameter over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions (LxWxH): 150x85x155 cm

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), A spinning, drawing, and winding line for the production of monofilament yarns, multifilament FDY, and POY is available. Spinning positions: 24, yarn ends: 192, drawing: cold and hot godets, doffing: without yarn breakage, quantity of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Includes various spare parts for both the machine and electronics. Documentation is available. On-site inspection is possible. Nodsuanq Tepfx Airold

Gamybos metai: 1990, būklė: naudotas, mašinos/transporto priemonės numeris: 9072492, Nominal power: 100 kVA Outreach: 500 mm Electrode arm spacing: 330 - 500 mm electrical connection: 400 V kW Space requirements: 700 x 1420 x 2000 mm Nlsdpfxjz H Dyj Airod Weight: 750 kg

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, equipped with DALEX DRF 5.2 cooling unit. Nedpfx Aieiknv Ejreld

Būklė: naudotas, Gamybos metai: 1993, Techniniai duomenys: Lakšto plotis: 3050 mm Lakšto storis: 6,0 mm Nlsdpfx Aou Rni Hsirjd Stovo tarpas: 3460 mm Eigos skaičius min./maks.: 9 / 17 eigos/min Galinė atrama: 750 mm (su varikliu) mm Pjovimo kampas: 0,5° - 3,0° Pjovimo tarpo reguliavimas: rankinis mm Prispaudėjai: 18 vnt. (hidrauliniai) Stalo dydis: 380 x 3100 mm Bendra prijungimo galia: 7,5 kW Mašinos svoris apie: 4,56 t Mašinos matmenys: I: 3,64 x P: 2,55 x A: 1,58 m Įranga: -su šonine atrama I: 1000 x P: 100 x A: 60 mm ir atraminė juosta 990 mm, su 8 atramomis -valdymas per valdymo pultą ir kojinį jungiklį -pjovimo zonos apšvietimas -eigos skaitiklis -mašinos kojos naudota

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Universal tool milling machine with gear transmission, Nljdpfxofvci Ee Airsd Travel paths X/Y/Z - 500/350/400 mm, rectangular table 800x400 mm, tilting and swiveling table 600x300 mm, 3 kW motor, 18 spindle speeds from 40-2000 rpm, ISO 40, quill stroke 60 mm, drilling capacity Ø 40 mm, automatic feeds and rapid traverse, left-right switch, 3-axis digital readout, horizontal milling head, coolant system, halogen machine lamp, rotary/swivel table. Dimensions 1500x1700x1750 mm, approx. 2200 kg.

Būklė: naujas, Turning diameter: 400 mm Turning length: 1,000 mm Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe with robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing due to heavily ribbed GG cast iron - Hardened and ground face spindle ensures exceptional precision and durability Nlodpfxed Eauks Airjd - High metal removal rates during roughing allow for finest surface finishes and tight tolerances - Wide range of threads and feeds without the need to change gears in the gear train - Bed guides are hardened and precision-ground - Main spindle with perfect concentricity mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic main spindle brake - All controls (electrical) centrally accessible - 4-way longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy - Error rate reduced - X-, Y-, Z0-, Z-axes each with 8-digit display - Glass measuring scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground, shafts on needle bearings, all components lubricated in an oil bath Apron – Completely sealed housing with safety device to prevent simultaneous operation of thread cutting and feed mechanisms Tailstock – Hardened and ground quill, generously dimensioned, with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Complete illumination of work area Main spindle – Perfect running accuracy, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad, machine lamp, coolant pump, direct drive, 2-speed motor switch, emergency stop pushbutton Coolant tank – Removable, fill level indicator, easy and complete draining and cleaning Control cabinet – Well arranged, 24V DC power supply, all contactors and relays by Schneider or Siemens Chip tray – Hinged, easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 phases Current type: AC Mains frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation of clamping movement: Center height: 200 mm Center distance: 1,000 mm Swing over bed: 400 mm Swing diameter:

Būklė: geras (naudotas), X-travel 400 mm Y-travel 375 mm Z-travel 250 mm Table size 205 x 800 mm T-slots 4 x 45 14 H7 Spindle speeds 50 - 3150 rpm Tool holder 40 ISO Quill stroke 50.0 mm Feeds X + Z axis 5.0 - 1000 mm/min Feeds Y axis 5.0 - 670 mm/min Rapid traverse 2.4 / 1.6 m/min Control Heidenhain Total power requirement 5.1 kW Weight 950 kg Dimensions L-W-H 1860 x 1790 x 1750 mm From a vocational training workshop Very well maintained condition (!!) Equipment: Nljdsxl E Syspfx Airjd - MAHO universal tool milling/drilling machine - HEIDENHAIN positioning/path control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Functional and user-friendly operation - Electro-motorized feeds on all axes (X/Z/Y) * X and Z axes: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swiveling milling head, tilts both sides - Tilting universal T-slot table - Vertical clamping area - Infinitely variable spindle speed control - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping system - Coolant system - Frontal coolant drip tray - Operating manual

Būklė: naujas, Gamybos metai: 2025, x-axis travel 580 mm y-axis travel 200 mm z-axis travel 340 mm Spindle speeds 115 - 1750 rpm Nlsdpfx Aetv Riasired Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, featuring a digital 3-axis position display DPA 31 Plus Description: - Heavy, robust design made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty precision cross table, ground surface, with T-slots and adjustable gib strips - Milling head tiltable ± 45° - Clockwise/counterclockwise rotation - X-axis movement selectable via handwheel or table feed unit - Automatic end-stop for the X-axis - Height-adjustable safety screen with microswitch, shielding against flying chips and parts for maximum operator protection Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, arbor for slitting saws Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbars for vertical and horizontal operation - T-slot nuts - Drift key - Operating tools