CNC tekiniai staklės, tekinimo skersmuo 0–199 mm pirkti naudotą (129)

Sąlyga: naudotas, Gamybos metai: 2002, MIYANO ABX-51SY with: Fanuc control system, Pgodpfx Aev Ipg Refwsw chip conveyor, MULTIFEED bar feeder magazine

Sąlyga: naudotas, Gamybos metai: 1996, Swing diameter 530 mm Turning diameter 150 mm Spindle bore 65 mm Control system SIEMENS 840 C X1 travel 175 mm Y1 travel +/- 70 mm Z1 travel 433 mm X2 travel 175 mm Y2 travel +/- 70 mm Z2 travel 433 mm Spindle speeds 38 - 4000 rpm Podpfxovh Nbnj Afwogw C-axis 2x Tool turrets 2x 12 stations Number of driven tool stations 2x 12 Tool holder Cylindrical shank (DIN 69880) VDI 30 Total power requirement 33 kW Machine dimensions (L x W x H) 3.95 x 2.49 x 2.6 m Accessories: Collet chuck for main and sub spindle, 1 collet each for main and sub spindle, various tool holders (including for driven tools), various spindle reducers, chip conveyor, coolant system

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 51 mm, The machine is a new stock machine. STANDARD EQUIPMENT Main spindle 15 kW, 4,000 rpm with Mitsubishi M830 control system with 4 cross slides on the main spindle featuring an 8-position servo turret VDI30x55 all stations usable for rotating tools central milling drive 3.3 kW, 3,000 rpm including stable polygon turning function (without tool holder) with full C-axis on the left spindle and sub-spindle with 48-position spindle locking for milling support including sub-spindle with workpiece catch tray and finished-part conveyor belt for falling cut-off parts or remnants with swing-in finished-part conveyor belt for discharging finished parts after back-side machining 4 tool holders for the rear area Pedpfxjug Up Ne Afwsgw with programmable high-pressure coolant (KM) for cleaning clamping devices before the next workpiece transfer with high-pressure KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel coolant and hydraulic pumps bar feeder interface interface for Lico chip conveyor 1 set of basic slide holders automatic lubrication system cutting force monitoring at all stations control cabinet with climate control unit three-color signal lamp Additionally, the machine is equipped with a turret for back-side machining. This turret is designed exclusively for stationary tools. BASE MACHINE EQUIPMENT Interface for bar feeder LICO / FMB Programming documentation for Lico machines Color Door RAL 7015 Slate Grey Chip tray/frame RAL 7024 Graphite Grey Housing RAL 7035 Light Grey

Sąlyga: naujas, Index MS32 DRIVE Z-NC SPK1 Article ID: GM2602.1551 Ball Screw Article ID: 10912112, previous Article ID: GM2602.1551 from stock/with storage marks – offer as shown in pictures – Pgjdpfx Aswb Evmjfwjw

Sąlyga: geras (naudotas), Gamybos metai: 1990, Manufacturer Traub, model TNS 60, control system type TX8-D, recorded operating hours: 2,321, serial number: 1407, year of manufacture: 1990 FROM TRAINING WORKSHOP Pgedpfx Asw Hdwgjfwew

Sąlyga: geras (naudotas), Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Pgedpjwb Eptofx Afwow Technische Details entnehmen Sie bitte den Bildern. Das Werkzeug im Holzkasten wird mit der Maschine geliefert.

Sąlyga: naudotas, TECHNICAL DATA MAIN SPINDLE - Spindle drive power: 11.7 [kW] Pgedpfxouhadue Afwsw - Spindle speed: 6000 [rpm] - Spindle bore: 25.4 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Workpiece holder headstock stroke: 400 [mm] - Tool holder slide stroke X x Z: 385 x 220 [mm] WEIGHT AND DIMENSIONS - Required floor space: 2200 x 2020 [mm] - Machine height: 2230 [mm] EQUIPMENT - Control: NUM 1060 - Coolant tank

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, We offer a Takamaz USL 480, which is ideally suited for production operations. The machine is equipped with a loading and unloading gantry as well as appropriate palletizing equipment. The spindle nose is of type A3 S2. The high-pressure system features four individually controllable valves. A fire extinguishing system is integrated. Control is provided by a Fanuc 21i TB. The machine weight is 1,300 kg. Currently, four Takamaz USL 480 machines are available. Pedpfx Ajv Efciefwsgw

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 9589 (232-0001),

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1 770 58 449, tekėjimo ilgis: 740 mm, tekėjimo skersmuo: 160 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 500 aps./min, X ašies eiga: 280 mm, Z ašies eigos atstumas: 1 130 mm, ašies variklio galia: 30 000 W, greitas poslinkis X ašimi: 30 m/min, greitasis eiga Z ašyje: 60 m/min, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, bendras aukštis: 2 950 mm, bendras ilgis: 4 350 mm, bendras plotis: 2 550 mm, padavimo ilgis X ašis: 280 mm, padavimo ilgis Z ašis: 1 130 mm, X ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 60 m/min, įvesties srovės tipas: trifazis, sukimo momentas: 191 Nm, bendras svoris: 12 000 kg, įvorės išorinis skersmuo: 215 mm, veleno nosis: A6, tvirtinimo skersmuo: 40 mm, Technical Data UNIVERTOR AS90/400 (English) Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Model: UNIVERTOR AS90/400R RT General Features: Machine type: Horizontal shaft turning center with pick-up loading system Application field: Complete machining of shafts and rotationally symmetrical components Loading: Integrated pick-up automation Machining types: Rough turning, hard turning, rough machining, finish machining Pgodpfx Ajvw Slhofwsw Tool turret: 12-station turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main Spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% duty cycle): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel Paths & Axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Centre distance: Max. 740 mm Travel distance X/Z-axis: 280 mm / 1,130 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. rapid traverse speed X/Z: 30 m/min / 60 m/min Tailstock: Thrust force: 850 daN Centre taper: MK4 Max. speed: 4,500 rpm Dimensions & Weight: Machine dimensions (L×W×H): 4,350 × 2,550 × 2,950 mm Weight: 12,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, The used TAKAMAZ X20 HI SERVER 2-axis CNC lathe with gantry loader is a fast, slant-bed CNC lathe for secondary operations, medium-sized with two axes and tailstock, equipped with automatic workpiece loading/unloading system with palletizer and FANUC 18TB CNC; in excellent overall condition, year of manufacture 2001, CE compliant. Main features: - Spindle nose ASA 6 - Main spindle power 7.5 kW - Main spindle bar capacity 51 mm - Maximum turning diameter 260 mm - Maximum turning length 450 mm - Spindle speed 4000 RPM - Turret tool positions 12 - X-axis travel (first turret) 165 mm - Z-axis travel (first turret) 500 mm - Rapid traverse (X/Y/Z axes) 24 m/min - Hinged belt chip conveyor Pedpfjwqxt Dox Afwjgw

Sąlyga: geras (naudotas), Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Technische Daten entnehmen Sie bitte dem Bild. Das im Holzkasten befindliche Werkzeug wird mit der Maschine geliefert. Pgsdpfowb Em Ssx Afwow

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 45 - 4,500 rpm - Max. chuck diameter (main spindle): 135 mm MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 45 - 4,500 rpm - Max. chuck diameter (main spindle): 135 mm TURRET 1 - Number of positions: 8 - Travel X/Z: 130 / 145 mm TURRET 2 - Number of positions: 8 - Travel X/Z: 130 / 145 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 32 kVA WEIGHT AND DIMENSIONS - Footprint: 3,800 x 1,875 mm - Machine height: 2,420 mm - Machine weight: 4,600 kg MACHINE HOURS - Power-on hours: 15,692 h EQUIPMENT - Control: Fanuc - 3-color status lamp - Coolant tank * with high-pressure pump * with paper filter Pgedpfxjuhadnj Afwsw - Chip conveyor: left - Oil mist extraction - Parts removal - Workpiece loading robot * Max. chuck diameter (main spindle): 165 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, veikimo valandos: 72 958 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1090064, bendras svoris: 4 000 kg, We are selling a Takamaz X180, ideally suited for production operations. The machine is equipped with a loading and unloading gantry with corresponding conveyors. Thanks to the driven tools, the machine is also suitable for a wide range of applications. The machine is sold including clamping devices, chuck, and tool holders. Pjdjvy Apvepfx Afwsgw

Sąlyga: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 98BE510071, tekėjimo ilgis: 90 mm, veleno greitis (min.): 4 000 aps./min, ašies variklio galia: 11 W, bendras svoris: 6 300 kg, strypo praėjimas: 51 mm, Torretta superiore a 12 posizioni (6 motorizzate) - torretta inferiore a 10 posizioni (5 motorizzate) - contromandrino - 2 assi C - dotato di caricatore di barre LNS Sprint S2 con magazzino frontale, portautensili fissi e motorizzati, manuali - Controllo Fanuc 18T Pgodewidp Iopfx Afwjw

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1 790 58 450, tekėjimo ilgis: 990 mm, tekėjimo skersmuo: 160 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 500 aps./min, X ašies eiga: 280 mm, Z ašies eigos atstumas: 2 400 mm, ašies variklio galia: 30 000 W, greitas poslinkis X ašimi: 30 m/min, greitasis eiga Z ašyje: 100 m/min, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 4 500 aps./min, bendras aukštis: 2 950 mm, bendras ilgis: 5 550 mm, bendras plotis: 2 550 mm, padavimo ilgis X ašis: 280 mm, padavimo eiga Y ašimi: 2 400 mm, X ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 100 m/min, įvesties srovės tipas: trifazis, sukimo momentas: 191 Nm, bendras svoris: 16 000 kg, įvorės išorinis skersmuo: 215 mm, veleno nosis: A6, tvirtinimo skersmuo: 40 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General Features: Machine type: Horizontal shaft turning center with pick-up automation Application area: Complete machining of shafts and rotationally symmetric components Loading: Pick-up automation Machining types: Rough turning, hard turning, rough machining, finish machining Tool turret: 12-position turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, probe Pgsdpfjvxf U Esx Afwjw Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% duty cycle): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travels & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel X/Z-axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. rapid traverse speed X/Z: 30 m/min / 100 m/min Tailstock: Thrust force: 850 daN Center taper: MT4 Max. speed: 4,500 rpm Dimensions & Weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, The used MURATEC MW 120G twin-spindle front CNC lathe is a high-speed numerically controlled lathe equipped with 2 spindles (with AUTOBLOCK 210 self-centering chucks) and 2 separate turrets (each with 8 positions), featuring a double automatic gantry loading/unloading system, as well as an automatic part turnover device for machining both sides. The machine comes with the long traverse option, a palletizer for part loading, and a discharge-side conveyor belt. Year of manufacture: 2006, CE compliant, FANUC CNC, equipped with high-pressure coolant pump, tool load monitoring system (TOOL MONITOR), rear chip conveyor, through-spindle coolant, and a set of toolholders. Main features: - ASA 5" spindle nose - X-axis travel: 130mm - Z-axis travel: 145mm - Spindle power: 11 kW - Machine weight: 4,000 kg Pedjwqxplopfx Afwsgw

Sąlyga: nepatikrintas (naudotas), Gildijos meistras GLD 20 Pgjdpfx Afovu Tn Eewsw

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 1 Pjdpfx Afouhacdowsgw MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 20/27 kW - Spindle speed: 6300 rpm - Max. bar capacity: 42 mm - Max. swing over bed: 200 mm - Max. main chuck diameter: 160 mm - Minimum C-axis resolution: 0.001° UPPER TURRET * Number of positions: 12 * Number of driven positions: 12 - Tool type: VDI 25 * Driven tool speed: 6000 rpm * Driven tool power: 8 kW LOWER TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 110/800 mm - Tool type: VDI 25 - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW TAILSTOCK - Tailstock type: Numeric ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 43 kW WEIGHT AND DIMENSIONS - Required floor space: 4435 x 1950 mm - Machine height: 1930 mm - Machine weight: 7500 kg ACCESSORIES - Control: INDEX C200-4D - Direct path measuring systems - Coolant tank * with high-pressure pump: 80 bar * with paper filter - Chip conveyor - Oil mist extraction unit - 3-jaw chuck

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 9 900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Control unit: Fanuc 18 it Integrated gantry loading system with travel distances 2100 mm + 2250 mm Portal Z-axis stroke increased by 100 mm ("Z" axis shift) Psdpsw E D Tlofx Afwogw Gantry with increased load capacity (12+12 kg) Muratec WFL 20-280 parts feeding system No. 2 Autoblock BH 250 power chucks No. 2 servo-controlled 10-position tool turrets for live tooling Static tool holder kit No. 2 radial live tool holders No. 2 axial live tool holders “C” axes for both spindles with continuous 360,000 positions Coolant + air outlet above left and right spindles “PEL” device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software TOOL LIFE MANAGEMENT software CE marking

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 000716, tekėjimo ilgis: 130 mm, veleno greitis (maks.): 8 000 aps./min, bendras svoris: 1 300 kg, strypo praėjimas: 16 mm, Type 510 J – equipped with Iemca MiniBoss 325/37 (year of manufacture: 1996) – tool probe – accessories – Fanuc 18-TB control system Podpfowrdxbox Afwegw

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 50 – 5,000 rpm - Max. bar diameter: 51 mm - Max. machining length: 125 mm - Max. main spindle chuck diameter: 165 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 7.5 kW - Spindle speed: 50 – 5,000 rpm - Max. bar diameter: 51 mm - Max. machining length: 125 mm - Max. machinable diameter: 165 mm Pedpfxouhad Is Afwegw - Minimum C-axis resolution: 0.001° LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 190 x 270 mm - Travel Y: +/- 40 mm - Driven tool speed: 6,000 rpm - Driven tool power: 4.5 kW RIGHT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 190 x 270 mm - Travel Y: +/- 40 mm - Driven tool speed: 6,000 rpm - Driven tool power: 4.5 kW LEFT LOWER TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 190 x 550 mm - Driven tool speed: 6,000 rpm - Driven tool power: 4.5 kW ELECTRICAL SUPPLY - Supply voltage: 220 V - Total connected load: 64 kVA WEIGHT AND DIMENSIONS - Floor space required: 3,290 x 2,204 mm - Machine height: 2,222 mm - Machine weight: 11,100 kg MACHINE HOURS - Operating hours: 42,151 h EQUIPMENT - Control system: Fanuc 31i-Model A - Tool measurement probe: RENISHAW - Electronic handwheel - 3-color status light - Coolant tank * with high-pressure pump - Chip conveyor: Droite LNS - Parts catcher - Parts conveyor belt - Bar feeder: TOP AUTOMAZIONI FU 350 - Electrical transformer - Set of collet holders

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 10 - Number of turret heads: 3 MAIN SPINDLE Psdpfeu Uu H Rex Afwogw - Spindle nose: A2-5 - Spindle drive power: 22/29 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] - Max. main chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 16.5/19 [kW] - Spindle speed: 7,000 [rpm] - Max. bar diameter: 42 [mm] * Max. main chuck diameter: 110 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 500 [mm] - Rapid traverse speed: 60,000 [mm/min] - Distance spindle / sub spindle: 515 [mm] LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 70 / 250 [mm] - Travel Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] RIGHT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X: 125 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 70 / 400 [mm] - Travel Y: 70 [mm] - Tool type: VDI 25 - Driven tool speed: 8,000 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 68 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 5,540 x 2,910 [mm] - Machine weight: 5,500 [kg] MACHINE HOURS - Spindle hours: 25,000 [h] ACCESSORIES - Control: INDEX C200-4D (based on Siemens) - 3-color status lamp - Coolant tank * with high-pressure pump: 20 [bar] * with paper filter * with rinse gun * Internal coolant supply (ICS): primary and secondary - Chip conveyor: RIGHT - Spindle cooling - Parts removal - Bar feeder: IEMCA BOSS 545 E - Driven tool holders: 6 - Fixed tool holders: 24

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 6 - Number of turret heads: 3 MAIN SPINDLE - Spindle drive power: 29 kW - Spindle speed: 6,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 4.2 kW - Spindle speed: 4,500 rpm - Minimum C-axis resolution: 0.001° - Travel: 280 mm LEFT UPPER TURRET HEAD - Number of positions: 5 - Tool type: VDI25 RIGHT UPPER TURRET HEAD - Number of positions: 8 - Number of driven positions: 8 - X/Z travel: 90/280 mm - Tool type: VDI25 - Driven tool speed: 4,500 rpm - Driven tool power: 4.2 kW LEFT LOWER TURRET HEAD - Number of positions: 6 - X/Z travel: 81/80 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 35 kW EQUIPMENT - Control: INDEX C200-4 - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal - Parts belt conveyor - Collet chuck Pgedpsuhac Defx Afwow

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE Pgodpfsuhadzex Afwsw - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH