Žiedų ir profilių lenkimo staklės

Zopf ZB 80/2 M

Sąlyga: naujas, Gamybos metai: 2023, veleno skersmuo: 80 mm, Profile Bending Machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of the lower rolls - Hydraulic side roll adjustment - Individually adjustable lower shafts - Three driven rolls - Segmented roll sections - Digital display - Touchscreen operation - Hardened shafts and standard rolls - Hydraulically adjustable side straighteners Ksdjqxcy Hspfx Ahwond - Usable in both horizontal and vertical positions - Mobile control panel - CE marking / Declaration of conformity Shaft diameter 80 mm, hardened Fully hydraulic Motor: 400 Volt, 50 Hz, 3 phase Weight: approx. 1,700 kg Dimensions: 1340 x 1390 x 1640 mm

Sąlyga: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirements: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut-start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush Feed vice with double-sided opening Minimum offcut length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation, adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping units Pre-selection of 3 different material feed speeds Kodofu Nbbepfx Ahwend Visualization of the entire workflow with easy data input

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, mašinos/transporto priemonės numeris: 070A-633, veleno skersmuo: 70 mm, volelio skersmuo: 245 mm, sukimosi greitis (min.): 8 aps./min, bendras svoris: 1 300 kg, bendras ilgis: 1 640 mm, bendras plotis: 1 220 mm, bendras aukštis: 1 580 mm, įėjimo įtampa: 380 V, įvesties srovės tipas: trifazis, darbinis greitis: 8 mm/s, Įranga: avarinis stabdymas, dokumentacija / vadovas, Profilbiegemaschine Tauring Alfa 70H2, Baujahr 2003 - Hydraulische Profilbiegemaschine mit digitaler Anzeige - 3 angetriebene Walzen Kodpfewkrpfex Ahwond - Doppel-Vorbiegefunktion, pyramidenförmige Walzenanordnung Wellenabgang: 70 mm Durchmesser der Universalrollen: 245 mm Seitliche Richtvorrichtungen links/rechts, hydraulisch motorisch verstellbar Umkehrbar, kann sowohl mit vertikalen als auch horizontalen Wellen arbeiten Werkzeugausstattung: - Satz Universalrollen und Distanzscheiben - Rollensatz für das Biegen von Rohren in den Durchmessern 22,5 – 61 – 76 mm (siehe Fotos der beiliegenden Rollen) Installierte Gesamtleistung: 5,5 kW, 380 V/50 Hz Abmessungen (LxBxH): 1.640 x 1.220 x 1.580 mm Gewicht: 1.300 kg

Sąlyga: naujas, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special features included in the price: 3 powered rollers Digital display Incl. standard roller set for steel Description Hydraulic/motorized ring bending machine Usable both horizontally and vertically with 3 powered rollers All 3 rollers are motor driven Upper roller positioning is hydraulic Rollers are hardened Forward/reverse operation via foot pedal Knodpsg Tzbwsfx Ahwsd Mounting: 50mm shaft Roller diameter (top): 158 mm Roller diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Compliant with CE standards Weight: 420 kg

Sąlyga: naujas, Cutting diameter: 240 mm Kjdpfsd Iip Ssx Ahwjnd Saw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with quick-clamping device • Quick-release lever for easy operation • Frame and gearbox cast in one piece, very quiet cut and low vibration • Electronic monitoring of blade tension and blade breakage, saw blade cover • Carbide saw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic saw frame lowering via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut. Rapid traverse lowering of the saw frame from rest position to the workpiece, then switching to normal sawing feed (e.g. for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Sąlyga: naujas, Gamybos metai: 2025, Cutting diameter 335 mm Saw band length 4400 x 34 x 1.1 mm Table height 750 mm Feed rate 5 – 2300 mm per stroke Cutting range at 90 degrees: flat 500 x 335 mm Cutting range at 45 degrees: round 330 mm Cutting range at 45 degrees: flat 320 x 335 mm Cutting range at 45 degrees: round left 305 mm Cutting range at 45 degrees: flat left 305 x 335 mm Cutting range at 30 degrees: round 180 mm Cutting range at 30 degrees: flat 170 x 335 mm Cutting speed 15 – 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - CE-compliant access protection with light barrier - MEBA automatic bandsaw in proven twin-column linear design and integrated MEBA gripper feed system, feed range 5 – 2300 mm per stroke - MEBA visualized program input with CNC control Fully automatic operation at any angle setting 30° – 135°, length and quantity. User-friendly program creation and management of up to 255 programs. Kedeulnb Djpfx Ahwend Operators enter the sawing task into the display mask using a cutting diagram. Input errors are minimized, ensuring simple and reliable creation of production jobs by different operators. - MEBA High-Performance Package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimal conditions for every sawing task, i.e. constant pressure for solid materials and constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, with integrated roller conveyor up to 3000 mm. - Both sides of the gripper feed vices can be opened. Ribbed strips for heavy material transport. - Saw frame made of heavy-duty, vibration-damping steel welded construction. - Saw band inclined 3° to material support surface for maximum cutting performance and blade life when sawing structural steel profiles. - Combination saw band guide, precision bearings to protect the saw band in the return section. Chamfered carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection between saw band and fixed vice—no change in length dimension when changing the miter angle. Automatic compensation of kerf width at every angle position. - NC angle programming. Control panel is stand-alone (standard for these machines). - Patented double miter vice system (ERP No.). Automatic positioning of vices: The material clamping vice automatically travels along the cutting direction according to the desired miter, ensuring the material is always squared and clamped close to the saw band. Clamping via full-stroke cylinders. - Rapid approach lowering of the saw frame via automatic height control bar until just before the material. In series cutting, the saw frame moves just above the material, allowing fast positioning of the next section—optimal cycle times in single and series cutting. - AC frequency-controlled saw band drive, infinitely variable 15 – 150 m/min. - Backlash-free preloaded, low-maintenance linear recirculating ball guides on material feed and saw frame feed for smooth, jerk-free operation.

Sąlyga: naujas, Gamybos metai: 2020, I-beam, flat 80 x 15 (Ø600) mm I-beam, upright 60 x 10 (Ø800) mm Angle steel 45 x 5 (Ø600) mm Solid material - diameter 35.0 (Ø700) mm Tube diameter 60 x 2.0 (Ø1000) mm Square material 45 x 45 x 3.0 mm Total power requirement: 2.25 kW Approx. machine weight: 0.5 t Knsdsgvqvmepfx Ahwed Space required: approx. 780 x 950 x 1450 mm SPECIAL PRICE // Ex-display machine (Year of manufacture: 2020) - Higher feed rate 6.6 m/min - I-beam, flat 80 x 15 (Ø600) mm - I-beam, upright 60 x 10 (Ø800) mm - Angle steel 45 x 5 (Ø600) mm - Solid material Ø 35.0 (Ø700) mm - Max. tube diameter 60 x 2.0 (Ø1000) mm - Square material 45 x 45 x 3.0 mm

Sąlyga: naudotas, Gamybos metai: 1987, Lead and feed screw lathe Manufacturer: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical specifications: Turning diameter: 250 mm Turning length: approx. 1200 mm Swing diameter over bed: 560 mm Swing diameter over cross slide: 365 mm Max. workpiece between centers: 500–800 kg Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travels Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MT 5 Quill stroke: 190 mm Longitudinal feed: 60 x 0.0315–28 mm/rev Cross feed: 60 x 0.016–14 mm/rev Thread cutting range: 0.125–112 mm Total power requirement: 20 kW Space requirement: approx. 3.5 x 2.0 x 2.2 m Kodpetud S Uefx Ahwend Weight: approx. 2.5 t

Sąlyga: naujas, Gamybos metai: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range: 30° right / 45° left Cutting capacities in mm: 45° left: round 300, flat 300 x 300 90°: round 410, flat 620 x 410 45° right: round 360, flat 420 x 360 30° right: round 300, flat 300 x 300 Remaining piece length without bundle clamping: 60 mm Recommended options: Micro-spraying device Laser light Clamping pressure regulator Powered chip brush Manual lifting roller Knjdpfx Aoh S Nxpohwjd Mounting elements

Sąlyga: naujas, Neue Ausrüstung, hergestellt in Dänemark. Hubzeit: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Güter werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbediente Hebe-/Senkfunktion mit Not-Aus. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Knodpfjd Hp Efex Ahwjd Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Freier Innenraum: 585 mm. Hub-/Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.