Portalo frezavimo staklėsZIMMERMANN
FZ 33c
Portalo frezavimo staklės
ZIMMERMANN
FZ 33c
Gamybos metai
2016
Sąlyga
Naudotas
Vieta
Vokietija 

Rodyti vaizdus
Rodyti žemėlapį
Duomenys apie mašiną
- Įrenginio aprašas:
- Portalo frezavimo staklės
- Gamintojas:
- ZIMMERMANN
- Modelis:
- FZ 33c
- Gamybos metai:
- 2016
- Sąlyga:
- labai geros būklės (naudotas)
Kaina ir vieta
- Vieta:
- Deutschland
Skambinti
Mašinų pardavimas

Radote naują mašiną? Dabar seną pavertkite pinigais.
Pasiekite geriausią kainą per Machineseeker.
Daugiau apie mašinų pardavimą
Daugiau apie mašinų pardavimą
Pasiūlymo informacija
- Sąrašo ID:
- A19187146
- Nuorodos Nr.:
- 2034-220
- Naujinta paskutinį kartą:
- Data 2025.05.20
Aprašymas
X-travel 2500 mm
y-travel 3000 mm
z-travel 1250 mm
Control HEIDENHAIN iTNC 530
Spindle speeds 22000 rpm
Tool holder HSK A-63
Spindle motor 60 kW
Swiveling spindle head +/- 110°
c-axis 360°
Tool changer with 50 positions
Fjdewlvrmopfx Acuegh
Table dimensions – longitudinal 2500 mm
Table dimensions – crosswise 3250 mm
Coolant system 40 bar
Machine weight approx. 60 t
Space requirement approx. 7.6 x 7.3 x 5.7 m
This ZIMMERMANN FZ33c is in very good condition.
The machine is available immediately
Description:
Technical data of the unit and working areas
X-axis 2500 mm
Y-axis 3000 mm
Z-axis 1250 mm
A-axis ± 110°
C-axis ± 300°
incl. vibration sensor
incl. bearing temperature sensor
incl. rotary union for internal coolant supply
5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display
Extraction system Keller Vario P1
Machine room enclosure
50-position tool changer, chain magazine, located at the rear of the machine
Chip conveyor, ejection 60° left, front side
Measuring probe Renishaw RMP60
Blum laser tool measurement "Control NT-Micro"
Clamping table
Length x Width x Height 2500 x 3250 x 400mm
Table load 8000 kg/m² (max. 16000 kg)
T-slots, longitudinal arrangement 18H12
T-slot spacing 250 mm
Dimensions, Weights
Space requirement (without peripheral devices) approx. 7600 x 7300 x 5650 mm
Total weight approx. 53500 kg
Electrical Connection Data
Voltage (three-phase) 400 V
Frequency 50 Hz
Fusing see installation plan
Power requirement see installation plan
Compressed air connection (provided by site)
Required air pressure 6 bar
Average air consumption approx. 15 m³/h (depending on machine equipment)
Linear axis drives
Feed rate X, Y, Z-axis 60 m/min
Axis acceleration X, Y, Z-axis up to 5 m/s²
Rotary axis drives – VH30
Feed rate A, C-axis 360°/s
Axis acceleration A, C-axis 700°/s²
Resolution A, C-axis 0.0001°
Linear axis accuracy – according to VDI / DGQ 3441
Positioning accuracy X-axis P = 0.026 mm
Y-axis P = 0.028 mm
Z-axis P = 0.020 mm
Repeatability X-axis Ps = 0.015 mm
Y-axis Ps = 0.016 mm
Z-axis Ps = 0.010 mm
Scale resolution (interpolated) A, C-axis 0.0001°
Rotary axis accuracy – VH30
Positioning accuracy A, C-axis P = 12" = 0.0033°
Repeatability A, C-axis Ps = 8" = 0.0022°
Milling head VH30
2-axis milling head: VH30,
Milling spindle Siemens Weiss
Spindle power S1 (100% ED) 60kW,
Spindle speed 22,000 rpm, 95Nm, HSK-A63
Outer dimensions fork head L x W approx. 500 x 600 mm
Nominal torque rotary axes closed-loop A: min. 1200 Nm C: min. 1047 Nm
clamped A and C-axis: 3000 Nm
(permanent lubrication with automatic re-lubrication system)
Swivel axis – spindle nose 326 mm
Tool holder HSK 63 A
Tool clamping spring clamp
Tool unclamping hydraulic
Permissible tool weight 4.5 kg (manufacturer specification)
Coolant supply external and internal
Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system
Tank capacity 1500 l
Pump 1: 40 l/min at 20 bar
Pump 2: 20 l/min at 40 bar
Blow air at the front of the milling spindle
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
y-travel 3000 mm
z-travel 1250 mm
Control HEIDENHAIN iTNC 530
Spindle speeds 22000 rpm
Tool holder HSK A-63
Spindle motor 60 kW
Swiveling spindle head +/- 110°
c-axis 360°
Tool changer with 50 positions
Fjdewlvrmopfx Acuegh
Table dimensions – longitudinal 2500 mm
Table dimensions – crosswise 3250 mm
Coolant system 40 bar
Machine weight approx. 60 t
Space requirement approx. 7.6 x 7.3 x 5.7 m
This ZIMMERMANN FZ33c is in very good condition.
The machine is available immediately
Description:
Technical data of the unit and working areas
X-axis 2500 mm
Y-axis 3000 mm
Z-axis 1250 mm
A-axis ± 110°
C-axis ± 300°
incl. vibration sensor
incl. bearing temperature sensor
incl. rotary union for internal coolant supply
5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15" TFT colour display
Extraction system Keller Vario P1
Machine room enclosure
50-position tool changer, chain magazine, located at the rear of the machine
Chip conveyor, ejection 60° left, front side
Measuring probe Renishaw RMP60
Blum laser tool measurement "Control NT-Micro"
Clamping table
Length x Width x Height 2500 x 3250 x 400mm
Table load 8000 kg/m² (max. 16000 kg)
T-slots, longitudinal arrangement 18H12
T-slot spacing 250 mm
Dimensions, Weights
Space requirement (without peripheral devices) approx. 7600 x 7300 x 5650 mm
Total weight approx. 53500 kg
Electrical Connection Data
Voltage (three-phase) 400 V
Frequency 50 Hz
Fusing see installation plan
Power requirement see installation plan
Compressed air connection (provided by site)
Required air pressure 6 bar
Average air consumption approx. 15 m³/h (depending on machine equipment)
Linear axis drives
Feed rate X, Y, Z-axis 60 m/min
Axis acceleration X, Y, Z-axis up to 5 m/s²
Rotary axis drives – VH30
Feed rate A, C-axis 360°/s
Axis acceleration A, C-axis 700°/s²
Resolution A, C-axis 0.0001°
Linear axis accuracy – according to VDI / DGQ 3441
Positioning accuracy X-axis P = 0.026 mm
Y-axis P = 0.028 mm
Z-axis P = 0.020 mm
Repeatability X-axis Ps = 0.015 mm
Y-axis Ps = 0.016 mm
Z-axis Ps = 0.010 mm
Scale resolution (interpolated) A, C-axis 0.0001°
Rotary axis accuracy – VH30
Positioning accuracy A, C-axis P = 12" = 0.0033°
Repeatability A, C-axis Ps = 8" = 0.0022°
Milling head VH30
2-axis milling head: VH30,
Milling spindle Siemens Weiss
Spindle power S1 (100% ED) 60kW,
Spindle speed 22,000 rpm, 95Nm, HSK-A63
Outer dimensions fork head L x W approx. 500 x 600 mm
Nominal torque rotary axes closed-loop A: min. 1200 Nm C: min. 1047 Nm
clamped A and C-axis: 3000 Nm
(permanent lubrication with automatic re-lubrication system)
Swivel axis – spindle nose 326 mm
Tool holder HSK 63 A
Tool clamping spring clamp
Tool unclamping hydraulic
Permissible tool weight 4.5 kg (manufacturer specification)
Coolant supply external and internal
Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system
Tank capacity 1500 l
Pump 1: 40 l/min at 20 bar
Pump 2: 20 l/min at 40 bar
Blow air at the front of the milling spindle
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2006
Pateikti užklausą
Telefonas & Faksas
+43 5472 ... skelbimai
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida