Vienos kolonos presas - hidraulinis

ZEULENRODA PYE 40 N

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Bsdpfx Ajfxyhfsahewi Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: naudotas, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Bwodsb Tcv Hjpfx Aahsi Space requirement: 650 x 550 x 1050 mm

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Bwjdpor Sxq Rsfx Aahoi Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 - Front bending aid (disassembled for transport) - DNC 900PS control unit All machine documentation is available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Pressure: 100 t Bending length: 2250 mm Frame width: 2050 mm Ram stroke: 275 mm Daylight (upper to lower beam): 410 mm C-frame throat: 300 mm X-axis travel, CNC programmable: 550 mm Z1+Z2 axes travel, CNC programmable/manual, 4 backgauge fingers: mm R-axis travel, CNC programmable: 130 mm Bedpfxovzcm Ds Aahewi Approach speed: 100 mm/sec Bending speed: 0–10 mm/sec Opening speed: 100 mm/sec Operating hours: 13,000 h Length: 3500 mm Width: 2000 mm Height: 2600 mm Weight: 5700 kg Total power requirement: 9 kW Required floor space approx.: 4 x 2 x 2.7 m All machines can be inspected under power at any time. Demonstrations are possible at any time. Front light curtain protection motorized, adjustable (Fissler) Rear SICK light curtain protection Manual crowning Promecam tool holders

Būklė: naudotas, Gamybos metai: 2004, Spaudimas: 80 t Lenkimo ilgis: 2550 mm Stovų atstumas: 2050 mm Presavimo sijų eiga: 350 mm Bodpfjxyzzaex Aahjwi Tarpas tarp viršutinio ir apatinio sijų: 620 mm C tipo išpjova: 420 mm X1+X2 ašių eiga per CNC programuojama: 700 mm Z1+Z2 ašių eiga per CNC programuojama: 0-2000 mm R ašies eiga per CNC programuojama: 200 mm Pristatymo greitis: 100 mm/sek Lenkimo greitis: 0-10 mm/sek Atidarymo greitis: 100 mm/sek Darbo valandos: 24000 h Ilgis: 3380 mm Plotis: 1800 mm Aukštis: 2750 mm Svoris: 6100 kg Bendras energijos poreikis: 9 kW Užimamas plotas apytiksliai: 3x2x2,5 m Visus įrenginius galima apžiūrėti bet kuriuo metu, esant įtampai. Demonstruoti įrangą galima bet kada.

Būklė: naudotas, Spaudimas 50 t Lenkimo ilgis 1500 mm Stovų tarpas 1220 mm Valdymas Cybelec DNC 1200 Uždarymo greitis 95 mm/min Darbo greitis 1-10 mm/s Darbinis eiga 156 mm Vėlinimo laikas 59 ms Vėlinimo eiga 6 mm Gylis 200 mm Atstumas tarp stalo ir viršutinio presavimo įrankio 301 mm Stalo plotis 160 mm Stalo aukštis 850 mm x ašis 550 mm R ašies eiga +/- 50 Ašių skaičius 3 (Y, X, R) Bwedpera Rrhjfx Aahei Svoris apie 3600 kg Įskaitant darbo lempą Įskaitant daug apatinės ir viršutinės įrankių 2003 m. atliktas pakartotinis priėmimas gamintojo (yra dokumentacija) Nauja valdymo sistema 2003 m. Cybelec DNC 1200

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Bwsdsfcw Apepfx Aahei Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Width: 1100 mm Depth: 1500 mm

Būklė: naujas, - Capacity: 100 tons - Cylinder stroke: 400 mm Bwodjilvb Nspfx Aahji - Working width: 1500 mm - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Būklė: naujas, Technical data: Drill diameter: 13 - 32 mm Point angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Bsdjd R A Dkopfx Aahjwi Motor power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/carbide twist drills - Safe operation through guided grinding process - Adjustable point angle from 90° to 140° - Compact design with integrated collet storage and carrying handle for quick stowage - Includes point thinning device to reduce feed force - Facility for back grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearings Scope of delivery: - CBN grinding wheel - 20 ER 40 collets, 13 - 32 mm - Collet holder ER 40

Būklė: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Bwedpfx Aasu Nfvuohji Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. *