Pjovimo staklės

ZERMA GS 500/800

Sąlyga: paruoštas naudoti (naudotas), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, featuring a reinforced steel/welded construction and documentation. Inspection possible. Year of manufacture unknown, completely overhauled in 2022. Nwedpfx Aen Tpmusf Nob

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 170 h, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, įpurškimo slėgis: 2 005 juosta, injekcijos svoris: 618 g, formos aukštis (min.): 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article Number: 225 Availability: In stock Year of Manufacture: 2016 Brand: KRAUSS MAFFEI Technical Data Injection Weight: 618 g Injection Rate: 848 cm³/s Clamping Force: 2,500 kN Screw Diameter: 60 mm Injection Pressure: 2,005 bar Tie Bar Distance: 630x630 mm Platen Size: 1135x1180 mm Minimum Mold Height: 330 mm Maximum Platen Opening: 1,150 mm Control System: MC6 Language: German Power: 70 kW Operating Hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Nwodpfx Ajvtzkfof Njb Hopper: No Core Pull: Yes Euromap Interface: Yes Air Valve: Yes Heated Channels: Yes Gas Accumulator: Yes

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12677, Rotor diameter: 400 mm Rotor width: 600 mm Nwodpfjk Tuxdex Af Neb 3-knife rotor 2 rows of stator knives Infeed opening approx. 600 x 660 mm Drive motor: 30 kW

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), Battenfeld HM 100/525 Injection Moulding Machine Year: 2006 Control System: Unilog B4 Technical Details Clamping force: 1000 kN Mould platen size (h x v): 680 mm x 594 mm Tie bar spacing: 470 mm x 420 mm Mould opening stroke: 500 mm Minimum mould height: 250 mm Maximum daylight: 750 mm Nedpfxok Rnvme Af Nswb Hydraulic ejector – stroke: 150 mm Ejector force forward/backward: 41.2 kN Injection Unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Shot volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 rpm Max. plasticizing rate: 30.4 g/sec Nozzle contact force: 86 kN Electrical and Hydraulic Equipment Installed heating power: 12.1 kW Heater zones (barrel): 1+3 Pump power: 18.5 kW Oil volume: 275 litres Dimensions and Weights Total machine weight: 4,600 kg Dimensions (L x W x H): 4.3 x 1.5 x 2.0 m

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. Nodpfx Ajud H Dmof Newb We look forward to your enquiry.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, spaudimo jėga: 1 300 kN, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Tie bar spacing (vertical): 520 mm Tie bar spacing (horizontal): 520 mm Min/Max mould height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Type: Horizontal Drive: Hydraulic Njdpswv Hrxjfx Af Njwb + Apex sprue picker robot Core pulls: Yes

Sąlyga: naudotas, Gamybos metai: 2017, spaudimo jėga: 250 kN, darbinio tūrio: 570 cm³, įpurškimo slėgis: 2 470 juosta, bendras svoris: 14 500 kg, darbo valandos: 22 900 h, sraigtinio konvejerio skersmuo: 55 mm, Pristatymo sąlygos: FCA Pegnitz Pristatymo laikas: pagal susitarimą Nedjxv D Tkjpfx Af Nowb Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis

Sąlyga: naujas, Gamybos metai: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a color touchscreen. Nsdpfx Asxdd Spsf Nowb Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie-bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection Unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Shot volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Standard injection flow rate: 311 cm³/s Standard screw speed: 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time (Euromap 6): 2.7 s Oil tank capacity: 720 dm³ Linear Robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X-axis (from mould): 900 mm, servo motor Y-axis (vertical, with motor brake): 750/750 mm, telescopic, servo motor Z-axis (cross): — Dimensions and Weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1984, veikimo valandos: 30 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 954594M02, bendras plotis: 80 mm, bendras ilgis: 2 000 mm, bendras aukštis: 1 500 mm, bendras svoris: 40 kg, Įranga: aušinimo blokas, Parduodu dvigubo sraigto ekstruderį (laboratorinį) su 2 lyginimo volais, eksploatacijos vadovu, lūpa 10 cm pločio juostoms, vandens vonia ir kt. Nwjdpfx Afjxpgyyo Neb

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 1000 kN, tie bar spacing: 470 mm/420 mm, platen dimensions X/Y/Z: 680 mm/590 mm, opening stroke: 500 mm, clear width: 750 mm, ejector stroke: 150 mm, ejector force: 41.2 kN. Screw diameter: 40 mm, L/D ratio: 22, injection volume: 251 cm³, shot weight: approx. 228 g, injection pressure: 2100 bar, injection stroke: 200 mm. Machine dimensions X/Y/Z: approx. 4300 mm/1500 mm/2000 mm, weight: approx. 4600 kg. Documentation available. An on-site inspection is possible. Nwjdpfjw Duvbjx Af Nsb