Antžeminis dangtis

Zeiss

Būklė: labai geros būklės (naudotas), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Description: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measurement system O-INSPECT from ZEISS enables optimal optical or tactile measurement of all features. The CALYPSO software allows for the simultaneous display of actual state, nominal profile, and deviations, making it very easy to identify and interpret measurement results. General Data: Dimensions: Width 1055 mm x Length 1351 mm x Height 1770 mm Measuring Range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM: 800 kg Workpiece, max.: 20 kg Noise Level of CMM: < 70 dBA Electrical Data: Mains Voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%) Power Type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5%) Power Consumption: max. 1500 VA Fuses: - At 230 V or 240 V: C 16 A - At 100 V or 125 V: 15 A Travel Speeds: Creep Mode (SLOW): 0 to 5 mm/s Setup Operation: 0 to 70 mm/s Serial Measurement Operation - Axis (X, Y): max. 200 mm/s - Axis (Z): max. 50 mm/s - Axis (3D): max. 287 mm/s Environmental Conditions: The following conditions must be met for proper operation of the coordinate measuring machine: - Ambient temperature for operational readiness: +17˚C to +35˚C - Relative Humidity: 40% to 70% (non-condensing) - Room temperature during measuring operation: 20˚C ±1 K - Altitude above sea level: - 100-125 V: max. 3000 m - 230-240 V: max. 2000 m Probe System: Probe System: CFS Probe Type Data: - Probe Type: CFS 2mm - Measuring Range: 2 mm; Working Distance: 61 mm; Spot Diameter: 12.5 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 15° - Measuring Range: 3 mm; Working Distance: 22.5 mm; Spot Diameter: 12 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 30° - Measuring Range: 10 mm; Working Distance: 70 mm; Spot Diameter: 24 µm - Measurable Surface Tilt Relative to Incident Direction: 90 ± 20° *Values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Dkedpfx Aiezii Dhotop Rotary Table: Mass and Resolution: - Mass of Rotary Table: 7 kg - Resolution: 0.15’’ Dynamics: - Angular velocity: max. 50˚/s - Rotational speed: 8.3 min⁻¹ Scope of Delivery: The standard version of the O-INSPECT coordinate measuring machine includes the following components: - Coordinate Measuring Machine (CMM) - Control Unit (integrated) - Control Panel - Computer with peripherals - Software: CALYPSO 5.2 - Documentation - Probe System - Reference Probe - Calibration Standard - Calibration Template Scope of delivery: (Zeiss Coordinate Measuring Machine as shown) Condition: used (Technical data subject to change and errors excepted!) Please enquire about transport options before purchase. For further questions, we are happy to assist you by phone.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, precision workstage with a measurement range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are top priorities. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands functionality by enabling geometric measurements, including the calculation of angles, radii, and distances. It also allows for the creation of tolerance reports. Dsdouyh Rpopfx Aitokp FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive report generation, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlays. These capabilities make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 500 mm, Įranga: Tipinė plokštelė prieinama, „Duramax“ – cechų įrenginys Pagaminimo metai: 2011 Paskutinis kalibravimas: 2026-02 Matavimo diapazonas: X = 500 mm, Y = 500 mm, Z = 500 mm Ilgio matavimo paklaida E0 (µm), E0/E40 (µm), maksimali leistina paklaida (MLP) pagal ISO 10360-2:2009: 2,4 + L/300, esant 18–22 °C temperatūrai Valdymo sistema C99 su valdymo pultu BP26_SE Pagrindinė komplektacija: Cecho įrenginio pagrindas Jutiklis VAST XXT Jutiklių keitimo žurnalas Jutiklių keitimo diskas Kalibravimo sfera Dedpfx Ajw N Nfgsitjkp Jutiklių priedai „HP“ darbo stotis Z4, „WIN 11“ ir monitorius Įrenginio aplankas ir dokumentacija kiti priedai Programinė įranga: „Calypso Basic 2025“ Galimos papildomos parinktys Galima greitai pristatyti

Būklė: geras (naudotas), Zeiss Primovert invertuotas mikroskopas (SN: 3841010097) WF 10x/20 okuliarai Djdpfxezhidrs Aitekp Zeiss Primo Plan-Achromat 4x/0,10 Zeiss Primo Plan-Achromat 10x/0,25 Ph1 Zeiss Primo Plan-Achromat 20x/0,30 Ph1 Zeiss Primo Plan-Achromat 40x/0,50 Ph1 Ph1 / 0,3 fazių slankiklis Apsauginis dulkių gaubtas

Būklė: naudotas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low loader, low-bed trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight rating: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Dkjdpfot N Antex Aitop Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and sliding tarp advanced) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – telescopic, adjustable in several stages - Very robust lashing eyes on outer frame and vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge €2,000 net) The vehicle was purchased new by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 900 mm, matavimo diapazonas Y ašis: 1 800 mm, matavimo diapazonas Z ašis: 700 mm, Įranga: Tipinė plokštelė prieinama, „Zeiss“ CNC koordinatinė matavimo įranga „Prismo VAST GOLD“ Pagaminimo metai: 2001 Atnaujinta 2024 ir 2026 m. Paskutinis kalibravimas 2023-11 Matavimo diapazonas: X = 900 mm, Y = 1800 mm, Z = 700 mm Techniškai ir vizualiai puikios būklės. Įrangos savybės, komplektacija: Valdiklis C99 su valdymo pultu Automatinė temperatūros kompensacija „VAST GOLD“ jutiklis 17 vietų zondų keitimo žurnalas 20 zondų keitimo diskas Priedai zondams Kalibravimo rutulys Referencinis zondas „HP Z4“ darbo stotis su „WIN11“ ir monitoriumi Programinė įranga „Calypso Basic 2024“ Dodpfszkhzhjx Aitekp Papildoma parinktis „QS-Stat“ Galimas „Calypso“ atnaujinimas ir kitos parinktys Galimi ir kiti priedai bei parinktys Greitai prieinama

Būklė: labai geros būklės (naudotas), Zeiss probe kit in very good condition Djdsurlqcopfx Aitskp

Būklė: naudotas,

Būklė: naudotas, 2 Carl Zeiss microscopes with accessories Dkedpfourlprex Aitjp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 201502530269, matavimo diapazonas X ašis: 700 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 600 mm, stalo apkrova: 560 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: CMM (Coordinate Measuring Machine) ZEISS Contura G2 with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe. The device comes from a controlled laboratory environment and has only been used "on-demand" during a single shift, never on a production line – resulting in very low actual mileage and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Year of commissioning: 2016 Dkedpfxoyzmbdo Aitjp Technical & visual condition: perfect Measurement error MPE (E0): 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning probe ✅ Probe rack / changer ✅ Probe styli set (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control console 🔹 Usage History Device operated exclusively in laboratory mode Sporadic, project-based use ("on-demand") Single shift, no serial or production work This results in very low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance as per manufacturer’s recommendations ✅ No third-party intervention ✅ Device fully functional 🔹 Status 📍 Machine available immediately 🔍 Viewing possible 📄 Complete documentation ✅ Transport on buyer’s side

Būklė: geras (naudotas), Robust crane system, ideal for glass storage or workshops. Lifting capacity: 3 t Length: 14,250 mm Width: 8,500 mm Height: 3,650 mm Dkodpfxoryv S As Aitsp Maximum hook height: 3,280 mm Maximum construction height: 3,950 mm.

Būklė: naudotas, Originalūs ZEISS CMM zondų laikikliai ir ilgintuvai Originalūs ZEISS zondų laikikliai Zondo ilgintuvai Įvairūs žvaigždės formos ir tiesūs zondai Kaip parodyta nuotraukose Būklė: Dsdpfxszg Eczo Aitekp Naudota Gera darbo būklė Atsargiai išimta iš veikiančio ZEISS CMM Puikiai tinka ZEISS CMM naudotojams, ieškantiems originalių atsarginių dalių ar papildomos matavimo įrangos.

Būklė: labai geros būklės (naudotas), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external saving of data and images. This enables quick and easy acquisition of information about the composition and morphology of specimen surfaces down to the sub-micrometer scale. With a magnification range from 5x to 300,000x, both macrostructure and microstructure investigations are possible. The application range can be significantly expanded by using special add-ons, allowing for analytical examinations of microareas on the surface, for example. Operation of the device can be conducted either via conventional control elements or via keyboard and mouse (optional). Electron optics and vacuum control are operated conventionally. Image memory functions are operated using the keyboard or mouse (optional). Centrally located on the control panel is a separate info screen for menu display. This user manual serves as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide even less-experienced users with the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a 1-2-3-5-10 sequence Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm – guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted specimen 25 nm – guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted specimen 3.5 nm – guaranteed with optimum LaB6 cathode at 30 kV, 6 mm working distance, un-tilted specimen Dkodpfx Aiszdthyetep Scope of delivery: (DSM 962 with accessories as pictured) Condition: used (Specifications and data may be subject to change and errors reserved!) Please ask about shipping options before purchase. We are also happy to answer further questions by phone.

Gamybos metai: 1981, būklė: naudotas, Pressure: 40 t Stand width: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/s Dodsb U Hw Tepfx Aitekp Drawing cushion hydraulic pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement: approx. 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/s Return speed: 200 mm/min with hydraulic drawing cushion – speeds: Rapid advance speed: 240 mm/s, infinitely adjustable

Gamybos metai: 1990, būklė: naudotas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement kW Machine weight approx. t Space requirement approx. m Overhauled: 2000 X-axis as longitudinal, traversing gantry 850 mm Y-axis cross slide in gantry 1,200 mm Z-axis as measuring head quill (vertical) approx. 600 mm Passage width between gantry legs approx. 1,000/1,080 mm Passage height approx. 750 mm Table size approx. 1,000 x 2,100 mm Table height above floor approx. 850 mm Machine height approx. 3,050 mm Weight approx. 3,800 kg Special equipment / Accessories: - Granite plate as measuring table and gantry head, vibration-damped - 3D measuring touch probe head for 5 different styli and for Dedpfst Hwqksx Aitjkp SCANNING mode for continuous data capture, resolution 0.1 µm - CNC control for simultaneous 3-axis movement - HEWLETT-PACKARD computer system H 382 with color screen, floppy drive, keyboard, possible printer - ZEISS software included: UMESS 300/MFT 300 with extension package (status 1998), plus 302 form & positional tolerance measurement, 303 fitting functions, 305 automatic operation, 307 Parameter Ctrl. Manager, plus option Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / borehole pattern program A 741 and Probe Check 99, - Mobile hand control panel with progressive joystick for continuously variable travel speed in 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, including probe changer - Separate electrical and control cabinet type 608485, separate computer desk, separate cabinet - Operating manuals, various measuring probes, and bolt-on calibration spheres / reference standards for the table