žiupsnelis vyniotinis vieneto/kryžius-sumažinti šlyties

ZAPPA 1.600 x 3 mm

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Fsdpod Auacofx Ab Sepb Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Fpjdpeunt Eyofx Ab Ssb Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Fodpfxjxddvne Ab Sjpb Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: naudotas, Technical details: Fpjdsw Au I Ijpfx Ab Sjb Ram stroke – max.: 250 mm Workpiece diameter – max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Various accessories

Sąlyga: geras (naudotas), Gummiband-Strahlanlage mit Muldenband Max. Chargenvolumen: 800 L Max. Chargengewicht: 2.000 kg Max. Werkstückgewicht: 150 kg Trommeldurchmesser: 1.350 mm Trommelbreite: 1.350 mm Anzahl der Turbinen: 2 Leistung je Turbine: 11 kW Max. Turbinendurchsatz: kg/min Reinigungstyp: Luft Fundament: nicht erforderlich Fsdpfjlf Hq Nsx Ab Sopb Gehäuseschutz: Mn (Manganstahl) Erforderlicher Luftdurchsatz: ja Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm

Sąlyga: naudotas, various types available Fedpfx Abjdc A Sbe Sopb

Sąlyga: paruoštas naudoti (naudotas), TOS GEAR HOBBER FO16 Didžiausias ruošinio skersmuo: 1600 mm Krumplyno plotis: 560 mm Didžiausias modulis: 16 Didžiausias ruošinio svoris: 7000 kg Stalo paviršiaus plotas: 1350 mm Sukimosi greitis: 16 – 80 aps./min Padavimai – ašinis: 0,05 – 1,5 mm/min Padavimai – radialinis: 0,25 – 6 mm/min Padavimai – tangentialinis: 0,13 – 4 mm/min Fjdpfx Asxwl R Tob Sjpb Elektra – įtampa/dažnis: 380/50 V/Hz Bendra galingumo paklausa: 12 kW Staklių svoris apie 18,5 t Staklių matmenys apie 4,3 x 2,0 x 3,2 m Staklės turi papildomą galvą, komplektą krumpliaračių ir velenų. Yra vaizdo įrašas su veikiančiomis staklėmis.

Gamybos metai: 1970, Sąlyga: nepatikrintas (naudotas), Offered here is a balancing machine from Trebel. Fedpehikdwjfx Ab Sspb The machine is equipped with a robust steel safety cover. For refurbishment, as the control cabinet is missing! Technical specifications: Manufacturer: Trebel Model: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Maximum permissible load per block: 200 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Technical Specifications: Working length: 4300 mm Distance between uprights: 3230 mm Pressing force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 Fodswl U Rhjpfx Ab Sspb CNC crowning Stroke: 350 mm Throat depth: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser safety system: FIESSLER Table height: 960 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 operating hours The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Sąlyga: naudotas, Hidraulinės plokštinės žirklės STEINER tipas HTS 30/20 R Mašinos Nr. 315 Pagaminimo metai 1982 Pjovimo ilgis 3050 mm Pjovimo storis 20 mm Fpjded Hxx Ajpfx Ab Ssb Galinio atmušėjo gylis 800 mm, valdomas Variklio galingumas apie 30 kW Maitinimo įtampa 400 Voltų, 50 Hz - Galinis atmušėjas su ELGO pozicionavimo valdikliu - Galinio atmušėjo reguliavimas rutulinių varžtų pagalba - Priekyje įrengta SICK saugos šviesos užuolaida pirštų apsaugai - 3 medžiagos atraminės rankos su rutuliniais riedėjimo ritinėliais - elektrinis kojinis jungiklis - atsarginiai peiliai - alyvos aušintuvas su oro šilumokaičiu - itin tvirta, stabilios konstrukcijos mašina Pagrindinės mašinos užimama vieta (I x P x A): 4650 x 2610 x 3200 mm Pagrindinės mašinos svoris: 27000 kg Transporto užimama vieta (pagrindinė mašina) (I x P x A): 4650 x 2610 x 3200 mm Transporto užimama papildoma vieta (I x P x A): 3500 x 2450 x 1400 mm Bendras svoris: 27000 kg Gera būklė Mašina laikoma sandėlyje 37235 Hessisch Lichtenau, galima apžiūra ir bandomasis pjovimas.