Rėmo presas Klijavimo presas

Z.V.B. Sonno

Z.V.B. Case Clamp Sonno
Manufacturer: Z.V.B.
Designation: Case Clamp
Model: Sonno
Max. carcass size: 1790 x 1280 mm
Operating voltage: 400 V
Connected load: 3kW
Operating pressure: 7 bar
Beijer Electronics E300 Operator Interface control panel
Control: Mitsubishi Melsec FX2N-64MT-DSS
SICK light curtain
2 hand control switches
Year of manufacture: 1997

General Work Description
The workflow is essentially divided into the following steps:

Program Entry
Take the program number for the carcass from the list and enter it using the keypad. Confirm the entry with the Enter key. The clamp will then move to the stored position for this carcass.

Pressing Process
1. After the position has been reached, the cylinders for the base support and the left lateral stop extend.
2. Now, position the left side onto the base support. It will automatically be held in place by a suction injector.
3. Then insert the base panel and gently press it into the dowel holes on the left side.
4. Next, insert the right side and connect it to the base panel.
5. By pressing the + key, the base panel is pressed together with the sides.
6. Now insert the back panel and fit it into the dowel holes.
Lodpjvdbpvsfx Ah Iehp
7. By pressing the + key, the back panel is pressed together with the sides.
8. Now check whether all connections are clean and the carcass is square.
9. If all parts are correctly joined, press the + key again to apply the final pressing force.
10. You can undo all steps individually by pressing the - (minus) key.

Releasing the Press
1. Once all work on the carcass is completed, end the pressing process by pressing the Release key. The pressure cylinders will be deactivated and the carcass will be held by the two lower cylinders.
2. As soon as the cylinders for the base support are retracted, place the transport pallet on the roller tracks.
3. By pressing the Release key again, the carcass is set down onto the pallet and can be moved onto the conveyor belt.

Next Carcass
1. Once the press is empty again, press the + key. The press will return to the position to process another carcass of the same type.
2. If a different type of carcass is to be processed, return to the entry page with the F6 key.

You will find more items—new and used—in our shop!
International shipping costs on request!

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.