Diskinis pjūklas

Yanigav Kreissäge SC600E / SC600M / SC700

Sąlyga: naudotas, veikimo valandos: 680 h, galia: 48 kW (65,26 AG), pavaros tipas: mechaninis, kuro tipas: dyzelinas, pirmoji registracija: 01/2020, spalva: žalia, bendras svoris: 5 200 kg, rida: 680 km, pakaba: kitas, sėdimų vietų skaičius: 1, Įranga: kabina, oro kondicionavimas, visų varančiųjų ratų pavara,

Sąlyga: naujas, Gamybos metai: 2022, Pressure 200 t Stroke 400 mm Table surface working width 1300 mm Pressure 243 bar Oil capacity 64 dm³ Approach speed 5.73 mm/sec Working speed 1.84 mm/sec Return speed 7.08 mm/sec Total power requirement 3.0 kW Machine weight approx. 1690 kg Knedpfxst I D Ths Advod Cylinder inner diameter [mm]: 320 Piston rod diameter [mm]: 140 Piston bottom diameter [mm]: 175 - Adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Hydraulic unit with two speeds - Height-adjustable working table - Joystick for piston up/down movement - Hand pump for precision work - With digital display This 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable working table, pressure regulation, 2 speeds, a joystick, and a hand pump for precision pressing.

Sąlyga: naujas, Special promotional price for stock items. Only while supplies last. Price ex stock, plus VAT. Workshop Press WK 50 FH Pro Pressing force: 50 t Piston stroke: 200 mm Table width: 260 mm Clear width (E): 730 mm Clear height (F): 205 mm Distance cylinder to table (F1): 75 mm Distance cylinder to table (F2): 1050 mm Transversely adjustable cylinder (M): 240 mm Ksdpsb Elguofx Advend Width (A): 1040 mm Depth (B): 800 mm Height 1 (C): 1835 mm Height 2 (D): 1880 mm Weight approx.: 287 kg Features: - Equipped with a cable winch for easy adjustment of the worktable height - Self-regulating hydraulics for effortless piston advance - High-performance workshop presses for trade and repair businesses - Excellent price-performance ratio due to efficient design - Standard foot pedal allows hands-free workpiece positioning - Extended application range with the optionally available 10-piece press pin set - Press cylinder with integrated return spring for piston retraction - Welded steel frame for heavy-duty use and high stability - Versatile operation with left/right transversely adjustable cylinder SPECIAL PRICE ex stock in Mindelheim. Only for stock items. While stocks last.

Sąlyga: paruoštas naudoti (naudotas), keliamoji galia: 32 000 kg, tuščias svoris: 38 000 kg, kėlimo aukštis: 12 200 mm, Demag DH hoist with digital scale Width: 6008 mm Main girder height: 1500 mm Hoist height above the beam: 1210 mm Type: overhead travelling crane Knodev Sfrwepfx Advjd Span: 25 meters Hoisting speed: 6.3 / 12.6 m/min Trolley (cross travel) speed: 10 / 34 m/min Crane travelling speed: 10 / 100 m/min Number of girders: double girder

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 4 233 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, stalo ilgis: 600 mm, stalo plotis: 210 mm, bendras svoris: 710 kg, stalo apkrova: 200 kg, Įranga: dokumentacija / vadovas, DECKEL FP1 – completely overhauled Top condition with CE-compliant modernization. MANUFACTURER: DECKEL MODEL: FP1 OPERATING HOURS: 4,233 h CONDITION: overhauled (2010) – as new both mechanically and electronically! LOCATION: Graz (Austria) IMAGES/VIDEOS: Images and videos available upon request Description: This high-quality DECKEL FP1 milling machine has been fully overhauled, mechanically and electronically upgraded to state-of-the-art standards, and is fully compliant with all current CE and BGVA 3 / DIN-EN 60204-1 regulations. As part of the modernization, a new touch-proof control cabinet was installed and a new brake motor fitted – for immediate spindle stop when the brake is activated. The machine is in as-new technical and optical condition, offering maximum precision, reliability, and durability – ideal for toolmaking, prototyping, repair shops, or training facilities. Technical Data: Operation: manual, with automatic positioning capability Knedpfeuhhm Rox Adved Control: 3-axis digital readout Heidenhain Speed range: 40 – 2000 rpm (stepped, 16 speed settings) Feed: 5 – 500 mm/min (infinitely variable) Rapid traverse: 1.2 m/min (infinitely variable) Quill: vertically & horizontally extendable, 80 mm, SK40 Travel axes (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load capacity: max. 200 kg Equipment: Vertical and horizontal spindle Manually swiveling milling head ± 90° Completely new electrical system & drive units Overhauled – as new mechanically & electronically Extras: Chip tray Z-axis bellows Machine lamp Universal table / rotary table / dividing head / counter bearing Special paintwork Highlights: New CE-compliant control cabinet (BGVA 3 / DIN EN 60204-1) New brake motor – instant spindle stop Heidenhain digital display for precise work Note: The purchase price after overhaul in 2010 was €75,000. Contact us to arrange a viewing appointment.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 030 kg, kuro tipas: dyzelinas, bakelio talpa: 250 l, spalva: balta, išėjimo srovė: 217 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 165 kW (224,34 AG), nuolatinė galia: 150 kW (203,94 AG), bendras ilgis: 3 200 mm, bendras plotis: 1 050 mm, bendras aukštis: 1 750 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Ricardo, Cummins, aušinimo tipas: vanduo, įvesties srovės tipas: trifazis, Three-phase stationary generator set Proton ZPP 150 (150kW - 165kW) in a compact, weatherproof and additionally sound-insulated enclosure. The generator features an external automatic transfer switch ATS (Autostart) as well as many other functions detailed further in the description. • Model – Proton ZPP 150R ATS • Maximum power – 165 kW / 200 kVA • Rated power – 150 kW / 188 kVA • Ready to operate – Yes (Pre-filled with fluids, test-run) • Type – Industrial generator • Condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – 6RT80-176DE-TURBO (British Series) Fuel type – Diesel Fuel consumption: - 33.0 liters per hour (at 75% load) - 24.0 liters per hour (at 50% load) Engine configuration – Inline (R4) Displacement – 9700 cc3 Direct injection Lubrication – Forced, with oil pump ⊳ ALTERNATOR: 100% copper windings AVR voltage regulator – Yes Alternator model – Proton 274G Rated output 400V – 150,000 Watt (150kW / 188kVA) Maximum output 400V (for up to 15 minutes) – 165,000 Watt (165kW / 200kVA) Rated output 230V – 50,000 Watt Maximum output 230V (for up to 15 minutes) – 55,000 Watt Rated current (400V) – 217.0 A Circuit protection – C16, C32, main – 250A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Sound-insulated enclosure Weather-resistant enclosure Three-phase and single-phase sockets Fuel tank capacity – 250 liters Operating time on full tank (average) – 20 hours Transport kit – Forklift slots and crane lifting eyes Dimensions: 105 x 320 x 175 cm Gross weight – 2030 kg ⊳ FEATURES: AVR voltage regulator – Stamford SX460 (2%) - electronic voltage stabilization under variable load - electronic frequency stabilization Automatic operation with ATS (Automatic Transfer Switch) Overload/thermal protection Oil pressure, oil level, and coolant level sensors Glow plugs Oil sump heater Coolant preheater Battery – 2 x 100Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Kodstp I Ipspfx Advend Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and GPRS monitoring – Optional Modbus, Ethernet communication – Optional Why us? We are a company specializing exclusively in generator sets. With over 17 years in the industry, we continuously strive to ensure our products represent the highest quality and reliability. During this time, we have provided solutions to over 10,000 customers in Poland, even in its most remote areas. We carefully select component suppliers to ensure they are leaders in their respective fields. We offer a wide range of generators from 6 to 300kW, equipped with various engines including English Ricardo, American Cummins, or German Deutz, as well as tailored configurations to meet specific customer requirements.

Sąlyga: naujas, Optimum OPTIdrill D 23Pro (400 V) Promotional Set Bench Drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and Weights Length (product): approx. 680 mm Column diameter: 73 mm Width/Depth (product): approx. 350 mm Height (product): approx. 1015 mm Weight (net): approx. 63.5 kg Drilling Capacity Drilling capacity steel (S235JR): 25 mm Continuous drilling capacity steel (S235JR): 20 mm Drill Table Drill table working surface length: 280 mm Drill table working surface width: 245 mm Drill table T-slot size: 12 mm Drill table rotation: 360° Drill table tilt: 45° Distance spindle - drill table max.: 425 mm Speed Range Speed range: 200 – 2440 rpm Number of speed steps: 12 Electrical Data Drive motor power: 0.75 kW Kodpfx Adjt N Ivvsvjnd Connection voltage: 400 V Mains frequency: 50 Hz Machine Base Distance spindle - machine base max.: 618 mm Machine base working surface length: 240 mm Machine base working surface width: 250 mm Machine base T-slot size: 16 mm Machine base number of T-slots: 2 Machine base T-slot spacing: 170 mm Spindle Quill stroke: 80 mm Spindle taper: MT2 Throat: 180 mm SCOPE OF DELIVERY Keyless drill chuck 1 - 16 mm Morse taper MT2/B16 T-slot nuts Machine vice BMP

Sąlyga: naudotas, Drilling capacity in steel (diameter): 60 mm Throat depth: 400 mm Total power requirement: 4.4 kW Machine weight approx. 1.7 t O F F E R We can offer you, subject to prior sale and errors, ex stock, without obligation: ALZMETALL Heavy-duty column drilling machine Model AB 5/S Year of manufacture approx. (1983) Serial number 183 _____ Drilling capacity in steel 50 mm Drilling capacity in cast iron 65 mm Spindle taper MK 4 Throat depth 400 mm Column diameter 220 mm Spindle stroke 240 mm 5 feed rates 0.1/0.2/0.3/0.4/0.5 mm/rev Table size 700 x 500 mm Vertical table adjustment approx. 600 mm Table rotation around column 360° Height from lower table to drill spindle 1,128 mm Spindle speed range Stage 1, variable 30 – 135 / 135 – 600 rpm Kjdpfx Aewftt Isdvsnd Stage 2, variable 60 – 270 / 400 – 1,250 rpm Total drive approx. 4.4 kW - 380 V - 50 Hz Weight approx. 1,700 kg Accessories / Special features • Very robust column drilling machine! • Automatic quill feed with depth stop and shut-off • Table size approx. 700x500 mm • Quill stroke with adjustable depth stop Condition: good – ready for demonstration under power Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We always have further pillar and column drilling machines in stock, please contact us with your enquiry.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, virvės ilgis: 30 000 mm, virvės greitis: 47 000 mm/min, mašinos/transporto priemonės numeris: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard equipment, horticulture, and many other applications. The hydraulic attachment winch makes numerous tasks easier: - Pull firewood to the log splitter and set it up - Load logs onto trailers - Extract roots and trees - Attach as an auxiliary winch to forestry cranes and small excavators - Use as a winch for small tractors and narrow-track tractors Rugged steel construction with three-sided mounting capability (left, right, rear) featuring 12 threaded holes, providing extensive options for securing the winch (threads are pre-cut and painted; re-tapping is required prior to use to remove rust protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), allowing you to select the desired speed and pulling power. Knjdpjdf Ufpofx Advsd Maximum operating pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min with 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolting or welding installation. This version includes an electric hydraulic valve, radio remote control, and hydraulic hoses to the motor. Article number: HAW1700-EV-Funk

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Ride-on mower Gutbrod 105 RHL - K Hydro Year of manufacture: 2010 Hydrostatic transmission - Oil change performed - New spark plugs - New fuel filter Knsdsxdt Slopfx Advjd - New battery - 2 new blades