Dyzeliniai krautuvai

Yale GDP40VX

Sąlyga: naudotas, Gamybos metai: 2008, veikimo valandos: 3 136 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 5 000 mm, kuro tipas: dyzelinas, statybinis aukštis: 2 370 mm, pavaros tipas: automatinis, Įranga: kabina, Yale GDP40VX Counterbalance Forklift * Lifting height: 5 m * Load capacity: 4,000 kg * Year of manufacture: 2008 * Read operating hours: 3,136 * Drive: 4-cylinder Cummins diesel engine * Techtronix 100 transmission * Tire size: front 205-15, rear 7.00x12 * Tread depth: 6–14 mm * Wheelbase: 1,850 mm Ijdpfx Aeu N Tkgsbkotr * Axle configuration: 4x2 * Overall dimensions: 4,860 x 1,450 x 2,370 mm * Weight: 7,030 kg * Free lift * Triplex mast * Side shifter * Fork dimensions (L x W): 1,800 x 150 mm * Full cabin Further data and additional photos available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for all information provided. Visit our website as well.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, WEINIG Q 18 - immediately available Iedpfxsvdfyre Abketr - long infeed table 2000 mm - 4 spindles

Gamybos metai: 2023, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 55 kW (74,78 AG), tuščias svoris: 7 000 kg, kuro tipas: dyzelinas, bendras ilgis: 3 977 mm, kėlimo aukštis: 4 250 mm, laisvas kėlimas: 150 mm, stiebo tipas: dupleksas, statybinis aukštis: 2 775 mm, šakių ilgis: 1 200 mm, šakių laikiklio plotis: 1 220 mm, pavaros tipas: Diesel, keliamoji galia: 4 000 kg, statybos plotis: 1 402 mm, mašinos/transporto priemonės numeris: HR14821, Diesel forklift Chassis number: HR14821 Load center: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: Techntronix 100-1-Speed Condition: Brand new unit Technical condition: New Front tyre type: Superelastic Front tyre size: 250x15 Front tyre condition: New Rear tyre type: Superelastic Rear tyre size: 7.00x12 Rear tyre condition: New Description: 12 months factory warranty / max. 2,000 operating hours, Cabin installation possible Sideshift, 3rd valve, 4th valve, rear working light, front working light, load protection grille, CE certificate, beacon, LED, seat, Itodpfx Abev Dn I Eekjr pedestrian warning light, acoustic alarm (activation in reverse) 82-102 dB(A), self-adjusting yellow beacon - activation via ignition switch, 2 front and 1 rear LED working lights with side, brake, tail, and indicator lights

Sąlyga: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces Isdsvu Hgbspfx Abkstr - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Sąlyga: naudotas, Gamybos metai: 1995, with pneumatic lift for drilling on 2 levels Itjdpfxjw Ed Ucs Abkjr used, top condition, low hours Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type-tested Drill chuck 16 mm Dowel drilling device with 1 indexing stop Workpiece stop Mitre fence 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pieces Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, without guarantee or warranty

Sąlyga: paruoštas naudoti (naudotas), SCM P64 Four-Side Planer Surfacing table length: 2300 mm Planing width: 180 mm Planing height: 105 mm Feed speed: 6 and 12 m/min Spindle diameter: 35 mm Axial cutterhead adjustment for profiling: 15 mm Itsdpfx Abot Dwg Tjker Surfacing motor power: 4 kW Thicknessing shaft motor power: 4 kW Right and left shaft motor power: 5.5 kW Weight: 1200 kg Dimensions: 2820 x 1220 x 1920 mm Condition: Function tested. All spindles have been newly fitted with bearings. Price: 5,500.-

Sąlyga: naudotas, Gamybos metai: 1996, Forklift Forks - Cascade 100mm, Year 1996 Online video inspection via Skype We would be pleased to welcome your visit – more machines available in stock. Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Test possible Itodoh Ax Edopfx Abker

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 1 500 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 4 652 mm, laisvas kėlimas: 1 428 mm, stiebo tipas: triplex, statybinis aukštis: 2 380 mm, šakių ilgis: 1 200 mm, tuščias svoris: 8 285 kg, bendras ilgis: 3 040 mm, pavaros tipas: Elektro, statybos plotis: 1 424 mm, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished with warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 80V Battery capacity: 110Ah Battery manufacturer: Hoppecke Battery type: PzS Ijdju D Trmjpfx Abkstr Battery year of manufacture: 2021 Battery condition: 80 - 100% Sideshift, 4th valve,

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 14 680 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 4 100 mm, laisvas kėlimas: 1 460 mm, kuro tipas: dujos, stiebo tipas: triplex, statybinis aukštis: 2 210 mm, šakių laikiklio plotis: 1 300 mm, šakių ilgis: 1 200 mm, tuščias svoris: 7 960 kg, bendras ilgis: 3 300 mm, pavaros tipas: Treibgas, statybos plotis: 1 400 mm, LPG Forklift Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 3.00-15 non-marking Rear tire type: Superelastic Rear tire size: 28x9-15 non-marking Description: In addition to this Yale model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Isdpfx Asu Dz Dqebkotr Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail regarding this GLP50VX. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons and up. We can also offer a consignment sale for your vehicle at our location. Sideshift, Full free lift,

Sąlyga: naudotas, Tyres, solid rubber tyres, forklift tyres Itjdpfxsur Ambo Abksr - Manufacturer: Continental, solid rubber tyre CSE-Robust Super Elastic SC 10 - Tyre size: 23 x 9-10 SC 10 RIM 6.50F - Bolt circle: Ø 162 x 20 mm - Recess: Ø 110 mm - Quantity: 1 tyre available - Dimensions: Ø 570 x 190 mm - Weight: 56 kg