Ekscentrinis presas

WMW PEDV10/II-S

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Dcsdpfx Adjfqpxijmsr Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Dsdpfx Adofx Hv Hjmocr Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Dcodpfxou Ibvho Admor Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: geras (naudotas), Gamintojas: WEINGARTEN Tipas: ER 125 Stalo dydis: 800x620 mm Dodon D Ebajpfx Admscr Spaudimo laikančioje dalyje matoma nedidelė įtrūka, įrenginys taip naudotas daugelį metų. !!

Sąlyga: naudotas, Gamybos metai: 1999, x-axis 6450 mm y-axis 400 mm Dcedpfxst H Sn Rs Admor z-axis 380 mm Machining length 6500 mm Number of tools: 8 pcs Tool holder: BT30 Tool change time: 1.2 sec Maximum tool diameter: 80 mm Spindle speed: 6000 rpm Feed rate X = 34 m/min Feed rate Y+Z = 18 m/min Total power requirement: 8.5 kW Dimensions: 9800 x 3000 x 2400/3300 mm Weight: 5400 kg *Bar machining center, 3-axis machining of aluminium, plastic, steel, and stainless steel profiles*

Sąlyga: geras (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 022885001, Offer 24342 Technical Specifications: - Fully automatic machine with hydropneumatic feed and MPS control - Equipped with programmable work cycles and stepless speed adjustment - Especially suitable for cutting stainless steel - Workpiece clamping with pneumatic machine vice - Saw blade diameter: 370 mm - Cutting speeds, stepless adjustment: 15 – 70 rpm - Mitre adjustable: right up to 45°, left up to 45° – 60° - Cutting capacity at 90°: round 130 mm; rectangular 180 x 100 mm; square 120 x 110 mm - Mitre cuts at 45°: round 130 mm; rectangular 120 x 100 mm - Maximum opening width of pneumatic machine vice: 160 mm - Drive: 400 V / 3 kW - Pneumatic connection: 6 – 8 bar - Coolant system - Infeed roller conveyor: 1000 mm - Outfeed roller conveyor with stop and digital measuring system: 4000 mm - Required floor space: approx. W 7500 x H 2050 x D 1100 mm - Weight: approx. 1200 kg Dcedpfx Aet N Rk Nodmjr

Sąlyga: geras (naudotas), Working length 6000 mm Dcsdpewlzg Njfx Admsr 12-position automatic tool changer

Gamybos metai: 1980, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm Dedpfxsktg Dhj Admscr - Max. installation height: 220 mm - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Sąlyga: naudotas, Single-column Eccentric Press WEINGARTEN Type ERV 40 Machine No.: 537 / 65 Year of manufacture: 1965 Pressing force: 40 tons Throat depth: 230 mm Table size: 570 x 470 mm Ram area: 250 x 200 mm Clamping shank bore: Ø 40 mm Maximum installation height: approx. 520 mm Stroke adjustment: 8 - 88 mm Ram adjustment travel: 63 mm Strokes per minute: 70 spm Drive power: 3 kW Electrical connection: 380 Volt, 50 Hz - Table height adjustment - Overload protection via shear plate - Clutch-brake combination with WEINGARTEN friction screw clutch - Electric two-hand control and foot switch - Central lubrication via manual pump Dsdpfxsffm Hho Admecr Space requirement (L x W x H): 1600 x 1150 x 2300 mm Weight: approx. 2.6 tons

Gamybos metai: 1975, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: P4198057, Article number: MA1136 Manufacturer: Ebu Model: SK 15 Dcjdpfx Aeh Ed Umedmor Year of manufacture: 1975 Machine no.: P4198056 Length [mm]: 1300 Width [mm]: 800 Height [mm]: 1800 Weight [kg]: 940 Connected load: 380V Stroke [mm]: Stroke adjustment 70 mm Throat depth [mm]: 210 Punching force [t]: 15 Table size [LxW]: 430 x 400 mm Equipment: 140 strokes/min