Paviršiaus šlifavimo mašina

WMW MEUSELWITZ SFW 315x1000

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: Ncedpfxocc D Ddo Aa Dew The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: geras (naudotas), Magnetic table 455 x 170 mm Digital readout Water tank Dressing device Nodpfotu Il Tsx Aa Dscw Wet grinding unit

Būklė: naudotas, Gamybos metai: 2008, Ratų skersmuo - maks. 700 mm Modulis - maks. 10 (18) Modulis - min. 1 Ncsdpfx Aajyv Ipfe Dow Stalo skersmuo 530 mm Stalo apsukos maks. 350 1/min Ašių atstumas 50 - 680 mm Ruoinio svoris 4 000 kg Ašinė eiga 1 000 mm Tangentinė reguliacija 300 mm Pasukimo kampas maks. +/- 45 laipsnių Variklio galia 32 kW Veleno apsukos 3 500 - 12 000 aps./min Įrankio skersmuo 320 mm Bendras galios poreikis 80 kW Mašinos svoris apie 25,00 t

Būklė: naudotas, Gamybos metai: 1992, Šlifavimo ilgis 0800 mm Šlifavimo plotis 500 mm Ruoinio aukštis 400 mm Stalo dydis 800 x 400 mm Ncedpewgnz Aefx Aa Dsw Stalo greitis 1–25 m/min Automatinis skersinis padavimas 0–60 mm/taktas Šlifavimo disko matmenys 400 x 100 x 127 mm Šlifavimo veleno apsukos 1400/2800 aps./min Bendras galios poreikis 10 kW Įtampa 380 V Staklių svoris apie 6 t Staklės su aušinimo sistema, automatiniu vertikaliu padavimu, paruošimo įrenginiu ir disko laikikliais. Valdymo sistema dėl amžiaus yra nepatikima!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1114.3705-24, Used CNC lathe Manufacturer: Boehringer Model: VDF 250Cm Year of manufacture: 1997 VDF Boehringer 250C This machine includes the following features: - 1000 mm turning length - No tailstock - Driven tools - Special swivelling chuck - Siemens 840C control system The Boehringer VDF 250 Cm is a CNC lathe designed for the machining of chuck components. It stands out for its robust construction and precise machining capabilities. Technical data (Model year 1997) Working area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Max. turning length: 1,000 mm (Tailstock: None) Turret: - Number of stations: 12 - Tool holder: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose: Size 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Ncodjwlap Aopfx Aa Djw Feed rates: - Automatic feeds: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axes) - Max. feed force: 15 kN Dimensions and weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swivelling control panel - HYDROKRAFT hydraulic system - Coolant system with 600 l tank, pump pressure max. 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, discharge to the right - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature controller by RITTAL Control system: - SIEMENS SINUMERIK 840 C Variants and Differences There are various models in the VDF 250 series, such as the VDF 250 CU, equipped with different control systems (e.g. PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are pure chuck machines designed without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe, noted for its stability and precision. Its durable construction and comprehensive range of features make it ideally suited for machining chuck components in diverse production environments.

Būklė: geras (naudotas), bendras plotis: 3 500 mm, bendras ilgis: 19 000 mm, bendras aukštis: 2 100 mm, ruošinio svoris (maks.): 6 000 kg, šlifavimo skersmuo: 850 mm, šlifavimo ilgis: 6 000 mm, centro aukštis: 425 mm, Apvalaus šlifavimo staklės Schmaltz - RM 82/6000 MACH-ID 9492 Gamintojas: Schmaltz Modelis: RM 82/6000 Nodpfx Aaey Dr Eas Docw Centrų aukštis: 425 mm Šlifavimo skersmuo Ø: 850 mm Šlifavimo ilgis: 6000 mm Šlifavimo akmens matmenys: 1100 x 80 x 560 mm Šlifavimo akmens apsisukimai: 700 aps./min. Stalas pasukamas: -5 iki +5° Priekinis tašna: 160 x 100 Mk Ilgis: 19000 mm Plotis: 3500 mm Aukštis: 2100 mm Svoris: 31000 kg Atkreipkite dėmesį: Informacija šiame puslapyje pateikta pagal mūsų geriausias žinias ir, kiek įmanoma, iš gamintojo. Informacija pateikiama sąžiningai, bet tikslumas nėra garantuojamas. Todėl jos nelaikytinos sutartiniais įsipareigojimais ar pasiūlymais. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: naudotas, Technical Data Faceplate diameter: 1580 mm Maximum turning diameter: 1700 mm Maximum turning height (cross rail tool post): 1250 mm Maximum turning height (side tool post): 1160 mm Maximum faceplate load: 12,000 kg Ncedpfxjwyn Nte Aa Dow Maximum distance from faceplate to lower edge of cross rail: 1210 mm Maximum distance from faceplate to lower edge of side tool holder: 980 mm Maximum distance from faceplate to lower edge of turret head: 1420 mm 18 spindle speeds: 2.8 - 140 rpm 18 feed rates: 0.063 - 3.15 mm/rev Total power requirement: 55 kW Space requirement (approx.): 5300 x 3500 x 4100 mm Control: conventional

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160 mm Wheel width 355 mm Module - max. 4.5 Module - min. 0.5 Centre distance 450 mm Total power requirement 11 kW Ncsdpfjvz Ec Iox Aa Dew Machine weight approx. 3.8 t Space requirement approx. 2x1.7x1.6 m Wheel diameter - max. 160/175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 4 300 mm, priekinės plokštės skersmuo: 4 000 mm, Vertikali tekinimo staklė SC43 CNC, modernizuota ir atnaujinta su CNC Fanuc 0𝑖-TF Plus Pagaminta Rumunijoje, gamintojas TITAN Pagaminimo metai: 1987 Staklės visiškai modernizuotos 2026 m. Pagrindiniai techniniai duomenys: - Skersinio disko diametras: 4000 mm - Didžiausias apdirbamos detalės skersmuo: 4300 mm - Didžiausias aukštis po skersiniu: 2000 mm - Didžiausias leistinas svoris: 18 000 kg - Skersinio disko apsukų diapazonas: 1–92 aps./min. - Pjovimo padavimų diapazonas: 0,05–5 mm/aps. - Stumdytuvų greitojo padavimo greitis: 2500 mm/min - Pagrindinio DC variklio galia: 55 kW Siemens (su Siemens keitikliu) Nodpfx Aasy A Iifo Djcw - Staklių svoris: apie 63 t Staklėse sumontuoti šie nauji komponentai: - nauja elektros įranga iš Schneider, Shrack, Siemens komponentų naujame skydelyje - naujas valdymo pultas - nauji mikro jungikliai - nauja hidraulinė pompa ir komponentai - nauja kreipiančiųjų tepimo pompa – atnaujinta visa sistema - nauja CNC Fanuc 0𝑖-TF Plus - pagrindinis 55 kW Siemens variklis (2018), suremontuotas ir su Siemens keitikliu Pagrindinė pavarų dėžė patikrinta ir suremontuota, pakeisti guoliai. Staklės perdažytos. Suteikiama 6 mėnesių garantija dalims. Galime atsiųsti daugiau nuotraukų ir vaizdo įrašų su staklių tikslumo matavimu. Nedvejodami kreipkitės dėl papildomos informacijos.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Swing diameter 400 mm O F F E R We can offer you, subject to prior sale and error, ex-stock and without obligation: WMW - GLAUCHAU Universal internal cylindrical grinding machine with face grinding attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Center height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivel range, max.: 30° Workpiece headstock cross movement, max.: 400 mm Grinding spindle slide longitudinal infeed: 70 mm Grinding spindle slide cross infeed, approx.: 100 mm Grinding head infeed, interval mode: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table travel, max.: 630 mm Table speed, steplessly variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle slide travel on table: 520 mm Grinding spindle drive power, approx.: 7.5 kW Total connected load: approx. 17 kW – 380 V – 50 Hz Weight, approx.: 6,000 kg Accessories / special equipment: • Universal internal grinding spindle unit with program-controlled cycles for grinding cylindrical and tapered bores with single or multiple diameters, external cylindrical grinding and narrow face grinding • Face grinding attachment, hydraulically swiveling, with automatic cycles for grinding single and multiple faces as well as stepped faces simultaneously Ncsdpoxyllvofx Aa Dow • Electronic program control with large operator panel including ammeter for both grinding spindles • Belt-driven grinding spindle unit with built-in spindle and 5 separate, exchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at workpiece headstock • HEIDENHAIN digital readout for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw face plate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel arbors, foot switch • Separate hydraulic unit, attached control cabinet, coolant device with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net, after receipt of invoice