Keturios šoninės obliavimo staklės

WINTER TIMBERMAX 6-23-U DELUXE

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Sliding table length: 3,700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3,200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4,000 / 4,800 / 6,000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connection: 80 and 120 mm Kodpfx Aoxzfqbof Ijdg INCLUDES: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3,850 x 1,650 x 1,850 mm Weight approx. 1,200 kg Note on used machines: • Technical data and prior sale subject to change without notice. • Stated prices are ex works – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Sąlyga: labai geros būklės (naudotas), Apatinės ašies frezavimo staklės Panhans 240A Ksdpjxg Iz Hsfx Af Iedg Veleno skersmuo: 30 mm Veleno ilgis: 130 mm Kintamas veleno greitis: 3000/4500/6000/9000 aps./min Elektroninis veleno aukščio reguliavimas Elektroninis liniuotės reguliavimas Elektroninis kampo reguliavimas SCM keturių volelių padavimo įtaisas

Gamybos metai: 2006, Sąlyga: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Kedpfxody A A Ns Af Iedg

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Kodovwfqqopfx Af Ijdg Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Sąlyga: naujas, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast iron construction - Equipped with fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward/reverse rotation - Large dimension cast iron milling unit, mounted directly on the table - Extraction hood below the worktable for improved dust extraction - Solid and precise cast iron table - Fast and effortless speed change - Powerful 5.0 kW motor - Standard supplied curved guard cover - Quality Made in Italy Equipment Details Cast iron milling unit - Mounted directly to the table - Spindle supported high up with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Fitted with high-performance three-phase motor Spindle Guard The standard spindle guard is equipped with a height-adjustable guide rail and protective plate for maximum safety as standard. Spindle Fence - Precise fence with quick adjustment and fine adjustment via scale on the fence jaw - Integrated extraction port ensures clear visibility Table Opening - Large table opening also allows the use of larger raised panel cutters and tenoning or slotting tools both above and below the table Curved Guard Cover - Included as standard Reversible Fence Jaws - Versatile fence for bridging the tool gap - Enables safe operation even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimal protection on any spindle moulder, individually adjustable for any task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable bars - High-quality aluminium construction - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No. 5851000 - 650 mm: Art. No. 5851650 TECHNICAL DATA Dimensions and Weights Weight (Net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Working Table Table length: 1000 mm Table width: 575 mm Table height: 900 mm Installation Details Kodpfxjkyt Ulj Af Isdg Required floor space length: 1945 mm Required floor space width/depth: 920 mm Note on required space: The dimensions take into account maximum working ranges or usable lengths. Machine body length: 1000 mm Machine body width/depth: 575 mm Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Add the indicated measurements to the required floor space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Supply frequency: 50 Hz Main drive motor output: 5.0 kW Spindle Usable spindle length: 100 mm Max. spindle projection above table: 130 mm Spindle speed(s): 3500/7000/10000 rpm Spindle shaft diameter: 30 mm Milling Tool Max. Diameter Max. diameter (retractable): 180 mm Max. profiling diameter: 210 mm SCOPE OF DELIVERY - Curved guard cover - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Kdodpfxexnldbj Af Ieg Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Kdsdpfx Aovnv Ubef Isg Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! (Techniniai duomenys pagal gamintoją – be garantijos!)

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 100 mm, pjovimo plotis (maks.): 245 mm, darbinio aukščio: 100 mm, įvesties srovės tipas: trifazis, – Year of manufacture: 2001 – Optimization – Cross-cutting – The machine is equipped with additional tables, allowing for a maximum cutting length of up to 6,500 mm (currently set to 3,400 mm) – 8 cutting lists Kdedpfxjwtzrhj Af Isg TECHNICAL SPECIFICATIONS: – Maximum cutting length: 6,500 mm (currently 3,400 mm) – Minimum workpiece length: 300 mm – Maximum cutting height: 100 mm – Maximum cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Maximum feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material clamping – Five ejectors – Intelligently controlled waste chute – Vario Speed system – Total machine length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Sąlyga: naudotas, Gamybos metai: 1995, maks. pjovimo plotis: 5300 mm maks. pjovimo aukštis: 2200 mm pjaunamo disko skersmuo: 300 mm maks. apdirbimo storis: 80 mm pjaunamo disko skylė: 30 mm medžiagos atrama: plastikinės lentelės, kintamos matuoklių sistema: skalė pjūklo galvos pasukimas: rankinis pjūklo padavimas: rankinis dulkių nusiurbimas: išorinis pjūklo sijos fiksavimas: rankinis svoris apie: 1500 kg matmenys: 6300 x 1500 x 2900 mm variklio galia: 5,5 kW Kedpfxjvvkqye Af Iedg Sandėliavimo vieta: Nattheim

Sąlyga: naudotas, Gamybos metai: 2001, Atmušos pločio: 4000 mm Atmušos aukštis: 1000 mm Išoriniai matmenys: 4600 x 1500 mm 2 x 1,5 kW varikliai Bendra nominali oro srauto apimtis: 7000 m³/h Ištraukimo jungtys dešinėje ir kairėje, 300 mm skersmens Sandėliavimo vieta: Garbsen Kodpfxevvizks Af Iedg