Krašto šlifavimo mašina

WINTER KSM-3000 ECO

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm Fedpfx Aswka S Ijhwjpd - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Būklė: naudotas, mašinos/transporto priemonės numeris: 007135, Maks. skydo plotis: 800 mm Maks. skydo ilgis: 2500 mm Fpedpfx Ajt Hmppjhwsd Transporterio ilgis: 9135 mm Detalių grąžinimas briaunavimo staklėms: kairėje

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), SAC CS40 Panel Saw Year of manufacture: 2008 S/N: 312029 Cutting length: 3,200 mm Fpjdpfx Ashwwlpjhwed Anodized aluminium sliding table: 3200 x 420 mm Locking mechanism for easy panel loading in any position Steel guide system Main saw arbor (30 mm), tiltable to 45° Electric raising and lowering of the main blade Main motor: 5.5 kW, self-braking motor Cutting speeds: 2,600 - 4,000 and 5,600 rpm Max. saw blade diameter: 400 mm Maximum cutting height: 130 mm (at 90°) 100 mm (at 45°) Rip fence: 1,500 mm Scoring saw motor: 0.75 kW 120 mm (scoring blade diameter – 8,000 rpm scoring unit with external adjustment) Square crosscut fence with stops Extension table with mitre fence and adjustable outrigger support 400 V, 50 Hz Weight: 820 kg CE marked

Būklė: naudotas, mašinos/transporto priemonės numeris: 007227, Pozicija 1: Vienpusė briaunų klijavimo staklės HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Plokščių grąžinimo sistema HOMAG + LIGMATECH-KAL 310 + ZHR 05 Fjdpfswuuc Aox Ahwjpd

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, CNC MACHINING CENTER SCM Brand: MORBIDELLI Model: UNIVERSAL 3612 Year: 2010 Fpodpfxjqpgglo Ahwsd • Working area: 3,680 x 1,260 x 150 mm • 1 Milling motor 8.5 kW (11.5 HP) • 1 Rotary automatic tool changer with 12 positions • 1 Drilling unit with: 18 vertical spindles + 8 horizontal spindles + 1 "X" axis saw blade • 250 m³/h vacuum pump • DXF-compatible software • BUMPER protection – CE compliant • Weight: 3,000 kg

Būklė: naudotas, Gamybos metai: 2004, Used machine Year of manufacture: 2004 Fpsdpfx Ahjxya Rtewed with gluing unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically driven main pressure roller as well as specialized post-pressure rollers for compressing the upper and lower glue joint Central, adjustable top pressure Central manual chain track lubrication Control panel at the machine infeed End trimming saw aggregate for front and rear edge overhang; high-precision linear guide 2 motors, each 0.18 kW Swivel range for straight and bevel trimming: 0-15 degrees Flush trimming unit, top and bottom, with vertical and horizontal sensing Swivel range 0-15 degrees with 2 milling motors and reversible cutter combination (straight/radius) Digital display units enable quick, precise, and thus repeatable adjustments Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for fine finishing with horizontal/vertical sensing Workpiece support extendable to 350 mm Integrated track control for contactless operation of processing functions. Adjustment via keyboard and LED display Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min. Electrical connection: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Storage location: Flörsheim

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, bendras aukštis: 1 445 mm, gaminio ilgis (maks.): 2 740 mm, Šis CASADEI Bordatrice E350PM buvo pagamintas 2022 m. Ji pasižymi 10-45 mm plokščių aukščio diapazonu ir palaiko 0,4-2 mm storio briaunų juostas. Mašina veikia 7 m/min padavimo juostos greičiu, klijų puodo kaitinimo galia - 1490 W. Apsvarstykite galimybę įsigyti šią CASADEI Bordatrice E350PM briaunų šlifavimo mašiną. Susisiekite su mumis dėl daugiau informacijos. • Plokštės aukštis: 10-45 mm • Padavimo juostos greitis: 7 m/min • Kraštinės juostos storis: 0,4-2 mm Fjdpfxex D Icfo Ahwjpd • Mažiausias plokštės plotis: 210 mm • Mažiausias plokštės ilgis: 600 mm • Mažiausias atstumas tarp plokščių: 600 mm: 95 mm • Išplečiama plokštės atramos anga: 310 mm • Darbinis pneumatinis slėgis: 0,65 MPa (6,5 bar) • Vidutinės oro sąnaudos: Vidutinė oro slėgio vertė: 320 Nl/ciklą • Klijų puodo kaitinimo galia: 1490 W • Bendrieji mašinos matmenys (darbo režimas): 2740 x 1445 x 945 mm (ilgis x aukštis x gylis) • Ištraukimo oro greitis: 30 m/s • Ekstrahavimo oro sąnaudos: 950 m³/h

Būklė: naudotas, DESCRIPTION: STRAPPING MACHINE Item: D-2225-Strapex-MarcoPolo Professional and high-performance strapping machine from a renowned European manufacturer, featuring an internal frame design for high-speed, reliable operation. Equipped with an ergonomic and user-friendly threading system as well as a quick-change strap coil system. Fpedpfxsq Dafps Ahwjd Model: Marco Polo Aperture: 550 mm x 500 mm 2 identical machines available.

Būklė: naudotas, mašinos/transporto priemonės numeris: 006574, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvas, fanera Fsdpjvxxuxsfx Ahwepd Klijavimo sistema: EVA Sujungimo frezavimas: taip Daugiafunkcis agregatas: taip Didžiausias padavimo greitis: 25 m/min Maksimalus plokštės storis: 60 mm Darbo agregatai: 7 vnt.

Būklė: labai geros būklės (naudotas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE Fpedpfxjun N Dlo Ahwod The line consists of the following machines: A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotating Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3