Kelios kombinuotos mašinos

WINTER K5 320-2000-230 V

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Functions: Sawing, Spindle Moulding, Surface Planing, Thickness Planing, Slot Mortising Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tiltable: 0°–45° - Max. cutting height at 90°/45°: 75 / 60 mm - Sliding table: 430 x 1300 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer / Thickness Planer: - Cutterblock diameter: 75 mm - Cutterblock with 3 knives - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. working width surfacing: 250 mm - Max. chip removal surfacing: 5 mm - Tiltable fence: 0°–45° - Max. working width thickness planing: 248 mm - Max. chip removal thickness planing: 2.5 mm - Max. workpiece height thickness planing: 190 mm Fodpfx Alovz E Sisxegh - Feed speed: 8 m/min - Table size (surfacing): 1085 x 256 mm - Table size (thickness): 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Fgodpsh U Damjfx Alxeh Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Būklė: geras (naudotas), Kodas: 0486 Gamintojas: SCM MINIMAX Modelis: CU 410 CLASSIC – atitinka CE standartą Universalus, profesionalus, aukštos kokybės 6 funkcijų derinys viename įrenginyje, skirtas medienos apdirbimui, baldų gamybai, individualių baldų, skydų, durų, langų rėmų ir kitų gaminių gamybai – atitinka CE standartą. Techniniai duomenys: Patvari konstrukcija: pagrindą sudaro vientisas, visiškai suvirintas plieninis monoblokas. Frezuojamasis stalas: Maksimalus apdirbimo plotis, mm 410 Ketaus stalo ilgis, mm 1800 Pakreipiamas kreipiamasis bėgelis 90–45° Frezavimo veleno sukimosi greitis, aps./min. 5200 Maksimalus frezavimo gylis, mm 4 Storio reguliavimo stalas: Storio reguliavimo stalo matmenys, mm 605 x 410 Padavimo greitis, m/min. 7 Minimalus/maksimalus apdirbimo aukštis, mm 3/230 Diskinis pjūklas: Pjovimo stalo ilgis, mm 2250 Pjovimo rėmas Pjūklo ašmenų pakreipimo kampas 90–45 laipsniai Maksimalus pjūklo ašmenų skersmuo su įmontuotu įpjovimo įrenginiu, mm 315 Fgodpfx Aloz E Sgusxoh Maksimalus pjūklo ašmenų iškyša, mm 100 Įpjovimo įrenginio ašmenų skersmuo, mm 80 Pjovimo plotis naudojant lygiagrečią kreipiamąją, mm 1050 Teleskopinis kreipiamasis su 2 fiksatoriais Frezavimo staklės: Veleno skersmuo, mm 30 Maksimalus veleno ilgis, mm 100 Veleno sukimosi greitis, aps./min. 1400/3500/6000/8000 Maksimalus įrankio skersmuo, mm 210 Medienos išgaubimo staklės: Ketaus medienos išgaubimo staklės su 16 mm skersmens velenu Darbinio paviršiaus matmenys 470 x 220 mm Detalės fiksavimo presas 3 trifaziai varikliai, 5,5 AG Siurbimo jungtys: 3 jungtys, 120 mm skersmuo Surinkto staklio bendri matmenys, mm 2500 x 2800 x 1200 (aukštis) Bendri matmenys transportavimui, mm 2500 x 1600 x 1200 (aukštis) Svoris, kg 630

Būklė: naudotas, Gamybos metai: 1989, Grinding and polishing Fgedponzkwmjfx Alxsh Maximum glass sheet dimensions: 3000 x 3000 mm Minimum glass sheet dimensions: 40 x 80 mm Working height: 820 mm Dimensions: Length: 7300 mm Width: 830 mm Height: 2730 mm Weight: 3650 kg

Būklė: naujas, Gamybos metai: 2026, Pagrindinės savybės: 5 funkcijos vienoje mašinoje Lentjuvesčio plotis: 400 mm Lentjuvesčio plotis: 400 mm Maksimalus lentjuvesčio aukštis: 220 mm Disko skersmuo: 300 mm Pjūvio aukštis: iki 100 mm (90°) Disko pakreipimo kampas: 0–45° Slankiojantis stalas: 1800 mm Frezavimo galvutė: velenas Ø30 mm, 4 greičiai Gręžtuvas (kalimo plaktukas): užspaudžiamoji galvutė 16 mm Variklis: 3 × 3,0 kW (galima pasirinkti 3 × 4,0 kW) Maitinimas: 380 V Svoris: apie 645 kg Fgedpfx Aszl Nz Sjlxsh Privalumai: Tvirta konstrukcija, pagaminta iš ketaus Tikslus aliuminio slankiojantis stalas Greitas funkcijų perjungimas Aukštas apdirbimo tikslumas Tinka profesionalioms stalių dirbtuvėms Patikimas veikimas, reikalaujantis minimalios priežiūros

Būklė: naudotas, Diskinis pjūklas-frezavimo staklės Bernardo CSM2000, gera būklė, 3 kW, 315/30 mm, apie 2200 mm pjovimo ilgis, apie 100 mm pjovimo aukštis, apie 500 kg Fgodpsx H Ufbjfx Alxsh Kainos gali keistis, galimi neatitikimai, spaudos ir rinkinio klaidos.

Būklė: naujas, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made from heavily ribbed cast iron and the machine base made from welded steel ensure torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system - Tiltable saw blade from 90° - 45° - Table extension with degree scale and aluminium crosscut fence for angle cuts on panels and large workpieces - Planer unit with TERSA quick-change system with three planer knives - Helically toothed steel infeed roller for consistent workpiece feed during thickness planing - Overhead milling safety guard for profiling, standard with fine adjustment - Milling unit with two speeds - Driven by three independent motors - Quality Made in Italy Technical Specifications: Dimensions and Weights Weight (net) approx. 245 kg Surface Planer Surface table width: 300 mm Surface table length: 1200 mm Angle adjustment saw/planer fence: 90/45° Max. planing depth: 3 mm Extraction Connector Extraction port diameter: 4 x 120 mm Extraction port diameter for saw blade guard: 60 mm Installation Information Required space length: 2460 mm Required space width/depth: 2155 mm Note on required space: Dimensions account for maximum traverse paths or usable lengths. Thickness Planer Thickness table length: 450 mm Thickness table width: 300 mm Min. working height: 3 mm Max. working height: 200 mm Max. thicknessing depth: 3 mm Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Duty rating drive motor: S6 Duty cycle drive motor: 40 % Drive motor power: 3 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1024 mm Table width: 224 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0° Spindle shaft diameter: 30 mm Fjdpfxovwf Ene Alxogh Usable spindle length: 75 mm Spindle speeds: 5,000 – 7,500 rpm Max. Cutter Diameter Max. tool diameter: 160 mm Max. retractable tool diameter: 180 mm Max. tenoning cutter diameter: 275 mm Planer Cutter Block Planer cutter block type: TERSA Planer cutter block diameter: 62 mm Number of knives: 3 pcs Circular Saw Unit Ripping length: 1200 mm Cutting width with parallel fence: 540 mm Max. cross-cut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 67 mm Max. cutting height at 45°: 40 mm Max. saw blade projection 90°: 75 mm Max. saw blade projection 45°: 60 mm Feed Feed speed: 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multifunctional fence for rip and surface planing operations - Table extension with crosscut fence and fence jaw - Eccentric clamp arm Article no.: 5500030

Būklė: labai geros būklės (naudotas), Planer: - Shaft width: 260 mm - Table length: 900 mm - 3-knife cutterblock Thicknesser: - Planing width: 250 mm - Table dimensions: 250 x 600 mm - Max planing height: 130 mm - Feed speed: 8 m/min Fgedpfx Aletur Epsxjh Spindle moulder: - Spindle diameter: 30 mm - Max tool diameter: 90 mm Saw: - Cutting height: 80 mm - Blade diameter: 250 mm Drill press: - Drill bit diameter: 3–16 mm - Table dimensions: 210 x 360 mm

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2000 x 3010 x 1250 mm Fjdpfxsvz Hgzs Alxjgh Weight: 400 kg Total power requirement: 4 kW Combined Panel Saw and Spindle Moulder KSF-315-2000 Saw: - Table size: 860 x 450 mm - Table height: 850 mm - Table extension: 500 x 310 mm - Table widening: 800 x 880 mm - Outrigger table with roller: 750 x 580 mm - Sliding table: 2000 x 270 mm - Cutting length: 2000 mm - Max. saw blade diameter: 315 x 30 mm - Max. cutting height 90°/45°: 100 / 80 mm - Cutting width at rip fence: 1270 mm - Main saw blade speed: 4500 rpm - Scoring blade speed: 8500 rpm - Scoring blade diameter: 2–100 x 20 mm - Extraction port diameter: 100 mm - Motor output S1 100%: 3.8 kW Spindle Moulder: - Spindle diameter: 30 mm - Height adjustment: 100 mm - Table inserts diam. 80 / 100 / 140 / 190 mm - Clamping length of spindle: 100 mm - Max. tool diameter: - for profiling: 180 mm - for tenoning: 200 mm - Spindle speeds: 1800 / 3000 / 6000 / 9000 rpm - Motor output S1 100%: 2.8 kW - Voltage: 400 V - Dimensions: W=2000 mm, D=3010 mm, H=1250 mm - Total weight: 400 kg Complete with: - Right-side table widening and fence bar can be folded down to save space - Robust and smooth-running rip fence with quick-release - Tiltable and height-adjustable circular saw blade with scoring unit - Cast iron table with rear and right extension and support leg - Extendable fence with folding stop - Roller on cross table for easy positioning of workpieces - Cutting width right of saw blade up to 1330 mm - Equipped with high-quality two-piece scoring saw blade - High-quality spindle fence with hold-down system and fine adjustment - 4 standard spindle speeds - Electronic speed display via LED - Max. cutter diameter: 200 mm - Large, removable handwheel for spindle adjustment Scope of delivery: - 2-piece carbide-tipped scoring saw blade - Carbide-tipped saw blade 315 x 30 mm, 40 teeth - Mitre fence

Būklė: naujas, Aluminum sliding table (anodized) with hardened steel guide rails. Kickback protection on thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø190 mm with under-table extraction. Milling fence 180 mm. Integrated spindle lock. Outfeed table with telescopic stop, eccentric clamp, graduated angle scale. 100% Made in EU (designed, built, quality tested). Technical Data: Surfacing unit: Table width: 410 mm Table length: 1800 mm Cutterhead diameter: 100 mm Number of planer knives: 4 pcs Cutterhead speed: 5000 rpm Motor output: 5 kW S6 400V (4 kW S1) Thicknessing unit: Thickness capacity min/max: 4 - 230 mm Feed speed: 7 m/min Spindle moulder: Usable spindle length: 125 mm Fedpfx Alsvrvcajxjgh Spindle height adjustment: 160 mm Max. tool diameter - profiling: 180 mm - tenoning: 250 mm Spindle speeds: 8000/6000/3500/1400 rpm Table openings: 190 mm Integral fence: 500 mm Motor output: 3.8 kW S6 400V (3 kW S1) Circular saw: Sliding table: 2300 x 285 mm Max/min saw blade diameter: 315 mm / 250 mm Tilting angle: 90° - 45° Max. cutting height: 90° - 45° Saw blade 315: 102 / 72 Motor output: 3.8 kW S6 400V (3 kW S1) Weight: 900 kg Optional accessories: Reversible knives (no extra charge) Spiral cutterhead Slot mortising unit Scoring unit