CNC kopijavimo staklės

WINTER CKD 1500-400 ATC

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8118133, įvesties srovės tipas: trifazis, filtravimo plotas: 50 m², neigiamas slėgis: 3 365 Pa, bendras aukštis: 2 660 mm, bendras plotis: 1 550 mm, bendras ilgis: 3 800 mm, nominali srautas: 6 920 m³/val, įsiurbiamojo kolektoriaus skersmuo: 350 mm, įėjimo įtampa: 400 V, Maksimalus tūrio srautas: 7950 m3/h Nominalus tūrio srautas: 6927 m3/h, prie 3365 Pa Gedpfx Adoxyi Unopott Prisijungimo skersmuo: 350 mm Filtro plotas: 50 m2 Dulkių klasė „M“, AWN 16 Cone Variklio galia (ventiliatorius): 11 kW Filtro regeneracija: pneumatinė-mechaninė Garso slėgio lygis: 70 dB (A) Įskaitant originalią SCHUKO valdymo spintą V24

Sąlyga: naudotas, Gamybos metai: 2008, Naudota mašina Pagaminimo metai: 2008 Būklė: mašina naudota Vokietijoje, reguliariai prižiūrima (paskutinis aptarnavimas Homag atliktas 2024/11) Įranga ir techniniai duomenys: Rušinės storis min.: 12 mm Rušinės storis maks.: 60 mm Mažiausi rušiniai (Ilgis × Plotis): 240 × 55 mm (kai storis 22 mm) / 100 mm (kai storis 60 mm) Briaunų storis min.: 0,3 mm (ritininė medžiaga) / 0,4 mm (juostinė medžiaga) Briaunų storis maks.: 3 mm (ritininė medžiaga) / 20 mm (juostinė medžiaga) Padavimo greitis: bepakopis reguliavimas 18–25 m/min (dažnio keitimu) Klijų tipas: EVA termoplastiniai klijai Klijų padavimas (vonia / kasetė / purkštukas): lydymo įrenginys su granulių talpa Klijų talpa / kasetės dydis: granulių talpa, lydymo galia 18–35 kg/h, automatinis lygio reguliavimas Įkaitimo laikas: apie 8–10 min. Krašto podavimo žurnalas (pozicijų sk.): 2 ritiniai (automatinis ritinių keitimas) Automatinis krašto keitimas: taip (automatiškai PC22 valdymu, galima perjungti rankiniu būdu) Priešfreza: 2 × 1,5 kW, 200 Hz, 12 000 aps/min, pneumatinis reguliavimas Prispaudimo zona: 1 priešprispaudimo volelis Ø 150 mm + 6 paskesnių prispaudimo volelių Ø 70 mm, automatinis reguliavimas Galų pjovimas: HL84 agregatas, 2 × 0,8 kW, pneumatinis reguliavimas (kampu / tiesiai) Lyginantis frezavimas: per priešfrezavimo agregatą, pneumatinis reguliavimas Radialinis frezavimas: FK13 profilinis frezavimo agregatas, automatinis 8 įrankių keitiklis (R = 2 mm) Kampinis/profilinis frezavimas: taip, su FK13 pneumatinis reguliavimas Grandiklis: integruotas į daugiafunkcę valymo įrenginį MN21 Poliravimas: poliravimo agregatas FA11 Prispaudimo blokas: KAL310/A20/S2 prispaudimo frezavimo agregatas, 2 × 3 kW Gtodewx Aaqspfx Adpot Rušinės pašildymas: yra Atskyrimo skysčio purškimo įtaisas: viršuje / apačioje, modelis 2929 (F.01) Ištraukimo antgaliai: keli Ø 100 mm (kiekvienam agregatui atskiras ištraukimas) Valdymas: power control PC22 (pramoninis PC, woodCommander Windows XP embedded) Darbinė įtampa: 400 V, 50 / 60 Hz Atitiktis: CE atitinka ES direktyvą 98/37/EB Matmenys / vietos poreikis: apie 8 000 × 1 400 × 1 600 mm Svoris: apie 3 000 kg Nuotraukose matoma grąžinimo įranga nepriklauso komplektacijai! Prieinamumas: greitai Sandėlio vieta: Lietuva

Sąlyga: geras (naudotas), Gamybos metai: 1990, Untha RS 30 modelio keturių velenų smulkintuvas iš žinomo gamintojo. 2 x 7,5 kW. Prieš 3 metus smulkintuvui buvo suremontuota pavara ir sumontuoti nauji pjovimo diskai. Nuo to laiko įrenginys beveik nebuvo naudojamas. Remonto kaina siekė 5300 €. Godpfx Adjxpn Hnepjtt

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Gtodswqhwlspfx Adpot Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Martin T 60 Panel Saw Heavy-duty precision panel saw Axis positioning control with 5.7" touch screen Automatic scoring unit Motor 5.5 kW Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Cutting length 3000 mm Cutting width with parallel fence 1250 mm Automatic width fence adjustment via NC control Width fence readout via touch screen Swiveling control panel above the table CE compliant version Gtjdpfoxx R T Nsx Adpot The machine is WORKSHOP-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, UNTHA RS30 SB-460 Pagaminimo metai: 2007 Gtsdpfx Adoxn Iwkspet Naudotas - Sugadintas Rotorių skaičius: 4 Malimo kamera: 460 x 500 mm Nauji peiliai: 1Z-66, 8Z-66 Variklio galia: 2 x 11 kW, 380 V, 50 Hz Naujos sieto skylės: Ø 30 mm Ilgis/Plotis/Aukštis: 1340/1250/1970 mm Svoris: apie 1100 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Sliding table length: 3,700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3,200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4,000 / 4,800 / 6,000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connection: 80 and 120 mm INCLUDES: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3,850 x 1,650 x 1,850 mm Weight approx. 1,200 kg Note on used machines: Gtjdpfsxzfqbsx Adpet • Technical data and prior sale subject to change without notice. • Stated prices are ex works – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, stalo plotis: 1 060 mm, stalo ilgis: 800 mm, darbinio aukščio: 400 mm, įėjimo įtampa: 400 V, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas Gtedpfew H Rq Hjx Adpjt

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Gedpfoxnldbex Adpjtt Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AL1/003895, X ašies eiga: 2 949 mm, Y ašies eiga: 1 353 mm, įėjimo įtampa: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drilling head with 10 + 4 spindles 6 individually selectable vertical spindles in X direction 4 individually selectable vertical spindles in Y direction 2 horizontal spindles in X direction (1+1) 2 horizontal spindles in Y direction (1+1) Speed: 4000 rpm Power: 2.2 kW Pitch: 32 mm Drill chuck: M10 with 11 mm fitting Extraction nozzle: D=160 mm Milling spindle: Tool holder: HSK 63F Speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm, S1) Clockwise / counterclockwise rotation Ceramic bearings Pre-fitted for automatic angle head changer Grooving saw unit: Fixed in X direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction nozzle: D=200 mm Work table: 4 supports 900 mm, infinitely manually adjustable in X Godpfxsxxik Hj Adpstt 12 vacuum cups, round D=110 mm, steplessly adjustable in Y (2 per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (6 total) Auxiliary stop on the right with roller conveyor to extend the X-axis to 3,230 mm (2 clampings) Retractable reference stops CNC controlled Pendulum processing (2 working zones) Further technical data: Total connected load (max.): 16 kW Recommended circuit protection: 64 A Supply: 400 V (50Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction duct with flap control: D=250 or D=300 mm Extraction velocity: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Space requirement: approx. 6,400 x 2,970 mm Transport dimensions: 4,400 x 2,200 x 2,500 mm